Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | I₹5.1 LAccepted-AOC CHENNAI | CHENNAI | TAMIL NADU | I | Accepted-AOC L1 | |
| 2 | IV₹6.8 LRejected-Finance NO 23A V V | IV | Rejected-Finance REJECTED | |
| 3 | III₹6.8 LRejected-Finance | III | Rejected-Finance REJECTED | |
| 4 | II₹6.8 LRejected-Finance | II | Rejected-Finance REJECTED |
| Sl No | Description | Qty | Unit | K.SARAVANAN L1 | sankaran construction L4 | V.JOTHI L3 | V.PARTHIBAN L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT | 7.5 | M3 | 6,416 ₹48,120 | 731 ₹5,482.5 Lowest | 6,524.85 ₹48,936.38 | 6,439.3 ₹48,294.75 |
| 2.00 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications | 105 | M2 | 238.15 ₹25,005.75 Lowest | 267 ₹28,035 | 245.35 ₹25,761.75 | 242 ₹25,410 |
| 3.00 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement | 55 | M2 | 945 ₹51,975 Lowest | 1,057 ₹58,135 | 968.65 ₹53,275.75 | 1,223.55 ₹67,295.25 |
| 4.00 | Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. | 126 | M2 | 1,350 ₹1,70,100 | 1,500 ₹1,89,000 | 1,373.9 ₹1,73,111.4 | 1,279.55 ₹1,61,223.3 Lowest |
| 5.00 | Supplying and painting the walls with two coats of cement paint as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work). | 250 | M2 | 133 ₹33,250 Lowest | 148.1 ₹37,025 | 135.9 ₹33,975 | 133.65 ₹33,412.5 |
| 6.00 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) | 100 | M2 | 131.2 ₹13,120 Lowest | 176.5 ₹17,650 | 134.7 ₹13,470 | 132.75 ₹13,275 |
| 7.00 | Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification. | 3.2 | M2 | 2,980 ₹9,536 Lowest | 3,324 ₹10,636.8 | 3,042.4 ₹9,735.68 | 3,002.45 ₹9,607.84 |
| 8.00 | Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. | 7.6 | M2 | 2,615 ₹19,874 Lowest | 2,911 ₹22,123.6 | 2,664.5 ₹20,250.2 | 2,618.7 ₹19,902.12 |
| 9.00 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification | 1.8 | M3 | 5,880 ₹10,584 Lowest | 6,544 ₹11,779.2 | 5,988.2 ₹10,778.76 | 5,909.25 ₹10,636.65 |
| 10.00 | Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. 20mm PVC Pipe | 48 | Rm | 140 ₹6,720 | 161.5 ₹7,752 | 148.5 ₹7,128 | 136.35 ₹6,544.8 Lowest |
Tender Value
₹6.8 L
EMD Value
₹6,800
Closing Date
11 Jun 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Commissioner Kancheepuram Corporation
Kancheepuram Corporation Annai Indira Gandhi Salai Kancheepuram
Renovation and Repair work of AKT High Secondary School Ward No.32 in Kancheepuram Corporation
2025_MAWS_561987_1
7329/2024/E2
Open Tender
Civil Works
Item Rate
Kancheepuram Corporation
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹6,800
19 Feb 2026
29 May 2025
11 Jun 2025
29 May 2025
11 Jun 2025
29 May 2025
29 May 2025 - 11 Jun 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_671057.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .