Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.9 LAccepted-AOC | L1 | Accepted-AOC Accepted Being L1 | |
| 2 | L2₹44.1 L+₹1.2 L (2.69%)Rejected-Finance NAKARI BORIGAON SIDING JORHAT 785001 ASSAM | JORHAT | JORHAT | ASSAM | 785001 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹48.9 L+₹6.0 L (13.9%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹49.6 L+₹6.6 L (15.4%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹50.1 L+₹7.2 L (16.7%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) JORHAT
GE (AF) JORHAT PIN-785005
COMPREHENSIVE MAINT OF BILLETS AT AFS UNDER GE (AF) JORHAT
2023_MES_588317_2
8536/E8
Open Tender
Miscellaneous Works
Item Rate
150 days
GE (AF) JORHAT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) JORHAT
₹96,000
Yes
30 Jun 2023
31 May 2023
15 Jun 2023
31 May 2023
13 Jun 2023
6 Jun 2023
Amount
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including 'Nainital' or similar pattern roof covering complete all as specified and as directed.
S&F Pre- painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw complete all as specified and as directed.
S&F Pre- painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall,ridge,facia etc.complete fixed with self tapping screw complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for coloured non skid ceramic tiles of size 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed in CM (1:6) complete all as specified and as directed.
M&L for coloured glazed ceramic tiles of sizes 300 x 200 x 7 / 450 x 300 x 6 to 7mm thick as in vertical surface such as in dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including screed bed or bedding layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.
M&L for 10 mm thick vitrified ceramic tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 20mm thick in cement mortar (1:6) complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) of area exc. 1.5 but n. exc 4 sqm, complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) of area not exc. 1.5 sqm, complete all as specified and as directed.
S&F power coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F power coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed.
S&F power coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
S&F 12mm thick prelaminated particle board "interior grade", prelaminated both sides with decorative choice laminates including necessary fitting complete all as specified and as directed.
S&F 2nd class hard wood plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with pinned at joints complete all as specified and as directed
Taking down shutter of any description of area n.exc 1 sqm each complete all as specified and as directed.
All as per Srl item No. 16 here-in-before but area exc. 1 Sqm but not exc. 2 Sqm each.
M&L for 2nd class hard wood 30mm thick glazed and skeleton shutters open rebated and prepare to received glass, gauge etc divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) and fited to wooden chowkhat, complete all as per specified and as directed.
M&L for 2nd class hard wood 35mm thick glazed and skeleton shutters open rebated and prepare to received glass, gauge etc divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) and fited to wooden chowkhat, complete all as per specified and directed.
S&F 2nd class hard wood 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown in SSR PT II as approved complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden bead in square n.exc 0.5 Sqm in each pane, complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .
S&F as in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .
S&F 75mm long, "medium weight" cold rolled mild steel butt hinges complete all as specified and as directed.
S&F 100mm long, "medium weight" cold rolled mild steel butt hinges complete all as specified and as directed.
S&F 100mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
S&F 150mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
S&F 100mm long aluminium anodised tower bolt of extruded section complete all as specified and as directed.
S&F 150mm long aluminium anodised tower bolt of extruded section complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for 3mm thick plywood grade BWR, type BB, fixed with screws to timber frame work complete all as per specified and directed.
M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails cross sectional area exc 3.0 sqcm but not exc. 6.0 sqcm (as in cover fillets) complete all as specified and as directed.
M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails cross sectional area exc 13.0 sqcm but not exc. 25.0 sqcm (as in cover fillets) complete all as specified and as directed.
Dismantling timber scantling, 40 sqcm and over in section, in any position as in unframed work, complete all as specified and directed.
M&L for 2nd class hard wood in scantlings in frame work as clean sawn complete all as specified and directed.
M&L for 2nd class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed.
S&F rotational moulded polyethylene (HDPE) water storage tank 500 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES schedule Part-I, including dismantling of water storage tank with float valve of any description complete all as specified and as directed
S&F rotational moulded polyethylene (HDPE) water storage tank 1000 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES schedule Part-I, including dismantling of water storage tank with float valve of any description complete all as specified and as directed
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed.
S&F 15mm bore galvanised iron water tubes 'Medium Grade' with all fittings and fixed to walls or ceilings or laid in floors, complete all as specified and as directed.
S&F 20mm bore galvanised iron water tubes 'Medium Grade' with all fittings and fixed to walls or ceilings or laid in floors, complete all as specified and as directed.
S&F as in repairs bib taps 15mm bore, chromium plated fancy type, cast copper alloy, with crutch or butterfly screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.
S&F as in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, "chromium plated", screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.
S&F as in repairs Vitreous China Bowl Urinal flat back, size 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe waste pipe) including providing and fixing plugs, bedding urinal against wall CM 1:2, complete all as specified and as approved.
S&F vitreous china squatting pan ‘ORISSA’ Pattern of size 580X440 mm White, with 'P' or 'S' Trap integral Foot rest, providing Joints between Flush Pipe and Socket of WC Pan (excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime concrete bedding inlcuding taking down unservicable wc pan and connected items, complete all as specified and as directed.
S&F as in repairs 10 litres capacity PVC low level syphonic action type flushing cistern 'white' with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and as directed.
S&F as in repairs vitreous china wash hand basin size 550 x 450 mm (flat back or angle back type) 'white' with 32mm dia brass chromium plated waste fitting, galvanised iron "light grade" 32mm bore waste pipe, a pair of cast iron brackets duly painted / erecting stand including cutting and pinning in ends, making good distrurbed surfaces in cement mortar (1:3) complete all as specified and as directed.
S&F as in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed.
S&F as in repairs 15mm stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.
S&F as in repairs PVC connection 15mm size with PTMT Nuts of length 450mm complete all as specified and as directed.
S&F 75mm bore PVC (SWR) soil, waste and veltilating pipe single socket in any legth with rubber ring joint fixed to wall with CI clamps, including taking down / up unserviceable pipe, complete all as specified and as directed.
All as per serial item No 54 here-in-before but 110mm bore PVC (SWR).
S&F as in repairs 75mm bore (dia) PVC (SWR) bends, complete all as per specified and as directed.
All as per serial item No 56 here-in-before but 110mm bore dia PVC (SWR).
S&F as in repairs towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all specified and as directed.
Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.
M&L for brickwork with subclass ‘B’ bricks (with old size first quality) straight or curved on plan exc 6m mean radius built in cement motar (1:6) complete all as specified and as directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and as directed.
Taking down cement plaster any description on brick walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with Water, etc. complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), mixing WPC as per manufacture instructions and finished even and smooth surface without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished even and smooth surface without using extra cement complete all as specified and as directed.
Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed.
S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed.
M&L for lath plastering 15mm thick in cement mortar (1:6) on one side of lathing, finished plastered surfaces even and smooth without using extra cement complete all as specified and as directed.
M&L for lath plastering 20mm thick on other side lathing in two layers 1st layer 12mm thick in cement mortar (1:6) and 2nd layer 8mm thick in cement mortar (1:4), finished plastered surfaces even and smooth without using extra cement complete all as specified and as directed.
Dismantling of damaged RCC works (cover slab of manholes, septic tank, kit slab or similar articles) of any description of any position not otherwise specifically provided for complete all as specified and as directed.
Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and as directed.
M&L for formwork to sides and soffits of kitchen slab complete all as specified and as directed.
M&L for reinforcement cement concrete M-25 (using 20mm graded stone aggregate) as in cover slab for manholes, septic tank, kit slab etc and set in cement mortar (1:4) complete all as specified and as directed.
Demolition of cement concrete (unreinforcement) as in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.
M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection, finished cement surfaces even and smooth without using extra cement complete all as specified and directed.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for drain, manholesetc. n exc 10sq m on plan and n exc 1.5m in depth and getting out as in soft/loose soil complete all as specified and as directed.
Returning, filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 cm thick in Soft/Loose Soil complete all as specified and as directed.
Removing excavated materials (Soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the Starting Point. complete all as specified and as directed.
S&F 150mm dia reinforced concrete pipes, class NP3, laid and jointed with collars compelete all as specified and as directed.
M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes of 150 mm bore after they are laid and tested; incomplete all as specified and directed.
Supply only integral Liquid water proofing compound complete all as specified and as directed.
M&L for applying two coats of cement base paint after preparation of new decorated plastered surfaces of walls complete all as specified and as directed.
M&L for applying two coats of distemper oil emulsion (oil bound washable distemper) after preparation old distempered surface of wall by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.
M&L for preparation of new painted wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (first grade quality) over one coat of pink primer complete all as specified and as directed.
M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed
M&L for 5mm thick plain colour PVC prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed.
M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 1mm over the plastered / old painted wall after scrapping to prepare the surface even and smooth and sanding of the putty surface with mechanical wall sander (having mechanical vacum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per following steps complete all as specified and as directed. Steps : (i) Mix the putty powder by adding water as per manufacture instructions and mix it with putty mixer with the mixing capacity of min 2.5kg putty per minute. (ii) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (iii) Allow 6-8 hrs time to dry the putty surface.
M&L for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltrs complying water in (2:1) ratio appiled over preming coat with fully automatic airless spray machine of paint application with a flow speed of 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacture instructions complete all as specified and directed.
Taking down carefully point wiring (light, fan, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall / floor etc. complete all as specified and as directed.
M&L for point wiring with 1.5 sqmm FRLS grade PVC insulated and unsheathed stranded copper conductor cable,1100 volts grade as per IS-694 drawn through and including PVC cassing and capping (not less than 20 mm wide) complete with all acessories including PVC board/ box of suitable size for mounting of switches, sockets, regulators etc including 1.5 sq mm stranded copper conductor cable FRLS grade PVC insulated and unsheathed as earth continuity conductor for one light point controlled by one way switch complete by maintaining the colour code complete all as specified and as directed.
All as per serial item No.92 here-in-before but for One ceiling / exhaust fan point controlled by one one way switch complete all as specified and as directed.
All as per serial item No.92 here-in-before but for 5 amps socket point on independent board complete all as specified and directed.
All as per serial item No.92 here-in-before but with 2.5 sqmm cable for 15 amps socket outlet on independent board, using 2.5 sqmm earth continuity conductor complete all as specified and directed.
S&F Ceiling rose surface backelite three terminals, PVC / polycarbonate insulated body complete all as specified and as directed.
S&F Switch piano flush type, 6 Amps 240 volts single pole one way complete all as specified and as directed.
S&F Socket outlet, 5 pin 6 Amps, flush type complete all as specified and as directed.
S&F Socket outlet 15/16 Amps, 6 in 1, flush type complete all as specified and as directed.
S&F Switch piano flush type,15/16 Amps 240 volts single pole one way complete all as specified and as directed.
S&F Fan regulator electronic type, rotary step, socket type 240 volts complete all as specified and as directed.
S&F as in repairs Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal with box complete all as specified and as directed.
S&F as in repairs Switch socket combination 2 in 1, 5 Amps flush type complete all as specified and as directed.
S&F as in repairs 20 watt integrated LED tube light fitting 4 ft, suitable for single phase 230 Volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrical connection with copper conductor cable of size 0.5 Sqmm (nominal area) complete all as specified and as directed. Make:-Crompton Cat No. CCS-102-20-65-SL-DP-NWH or its equivalent model from make as specified in particular specifications.
S&F as in repairs building security light 30 watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP-65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver, complete all as specified and directed. Make:Crompton Cat No.LSTS-30-CDL-M or its equivalent model from make as specified in particular specifications.
S&F as in repairs SP&N DBs, double door, 240 volt, 8 way complete all as specified and directed. MAKE:- L&T Cat part No. DBSPN008DD or its equivalent model from make as specified in particular specifications.
Taking down ceiling fan / exhaust fan/ wall fan including ceiling cable of any Size / Sweep and Make by disconnecting electric connection, dismantling blades, down rod and removing ceiling fan to MES STORE YARD OF AGE E/M (AF) JORHAT for Checking, complete all as specified and as directed (Repair / painting shall be measured & paid separately).
S&F 1200 mm sweep ceiling fan, double ball bearing , AC motar, 230 volt, 50 Hz, 3 blade with up to 30cm long down rod, 02 Nos of canopies, power input 65 watt, 380 RPM, copper winding, air delivery minimum 200cm, including connecting up of cable with flexible pipe from ceiling rose or connector to fan after taking down old unserviceable ceiling fan in any position complete all as specified and directed . Note :- Old unserviceable fans shall be deposited to MES storeyard of GE(AF) Jorhat.
S&F exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed. Note :- Old unserviceable fans shall be deposited to MES storeyard of GE(AF) Jorhat.
S&F as in repairs 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB with connection testing and commissioning complete all as specified and as directed.
S&F as in repairs 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 AMP, in the MCB DB with connection testing and commissioning complete all as specified and as directed.
S&F Capacitor 2.5 MFD 440 Volts AC 50Hz, suitable for ceiling fan of any sweep and Make, complete all as specified and as directed.
M&L for submain wiring with two runs of single core 2.5 sqmm FRLS PVC insulated copper cable 1100 vots grade multistrand, unsheathed conductor drawn into PVC casing and capping and all necessary fittings including 2.5 sqmm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete including taking down old unserviceable sub main wiring of any size and making good disturbed surface complete all as specified and directed. NOTE:- (i) Three runs of cable 2.5 Sqmm shall be measured as one RM of sub main wiring.
All as per serial Item No. 113 here-in-before but two runs of single core 4 Sqmm for phase & neutral and 01 run of single core 4 Sqmm for earth wire complete all as specified and directed. (i) Three runs of cable 4 Sqmm shall be measured as one RM of sub main wiring.
Taking down / out unserviceable or serviceable UG cables of any cross sectional area and connections including bricks, etc. of any descriptions, laid in trenches and /or fixing with walls /poles including segregating of serviceable materials viz bricks, cables, etc. and kept in Safe custody for re-use complete all as specified and as directed. (NOTE : Earth Work shall be measured and paid separately under relevant Items here-in-after)
Excavation in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth and getting out as in soft / loose soil, complete all as specified and as directed.
M&L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm 2 core, complete all as specified and as directed. Note : Rate of saddle and clamp for fixing of cable on wall is included in this rate.
M&L for Sand Cushioning (dry) in trenches for protection of UG Cables (below, above and around the UG Cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (NOTE : For the purpose of payment, punning thickness of Sand cushioning shall only be measured).
S&F Sub-Class 'B' brick, well burnt, laid breadth-wise along the length of Cable laid in trenches over sand cushion laid for UG Cable protection, complete all as specified and as directed.
S&F as in repairs galvanised Iron Pipe 32 mm Bore (dia) ‘Light grade’ for protection of UG Cable, laid in floors/ road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc complete all as specified and as directed. Note:- The contract sum shall be calculated by deducting the amount shown in Schedule of Credit attached to this tender, from total amount of Schedule 'A'/BOQ.
HEMONTA DAS
A M CHOUDHURY AND CO
M/S BARUAH ELECTRICALS
AJOY DUTTA CHOWDHURY AND CO
M/S RK SAHA AND CO
SURAJIT GOGOI
M/S Deep Construction
M/S GOPAL ROY AND CO
Bidder Name
HEMONTA DAS
M/S RK SAHA AND CO
A M CHOUDHURY AND CO
AJOY DUTTA CHOWDHURY AND CO
M/S GOPAL ROY AND CO
M/S Deep Construction
M/S PAUL CONSTRUCTION
SURAJIT GOGOI
M/S BARUAH ELECTRICALS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .