REPAIR REPLACEMENT OF FENCING PATHS RAILINGS HARD STANDINGS ETC AT DEMPSY ROAD COD ROAD IN THE AREA OF AGE BR EAST UNDER GE DEHU ROAD

Amount

Dismantling posts or struts (wood, angle or iron ) any section, including taking out embedded portion and makinfg good disturbed ground all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Dismantling barbed wire , any type complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming in layers not exceeding 25 cm, watering and removing surplus soil to a distanc n exc 50 m and making good surface in hard/dense soil all as specified and as directed.

M&L for Cement concrete 1:3:6 type C2 (using 40mm graded aggregates) as in foundations, footing and mass concrete all as specified and as directed.

S&L Mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

Supply only TMT bars 10mm dia and over, as in line wire for chain link fencing all as directed by Engineer-in-Charge.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck 5 to 10 mm all as specified and as directed.

Supply only Chain link MS galvanisd fencing 3.8 mm dia wire, any mesh size all as specified and as directed.

Fixing only chain link fencing including fixing line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire all as directed by Engineer- in-Charge

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) all as specified and as directed.

M &L for two coat of synthetic enamel paint over a coat of red oxide primer, including preparation of steel Surfaces of any description, over 10cm in width or girth,not otherwise described all as specified and as directed.

M&L for two coat of Black bituminous paint including preparation of surfaces of steel , iron , concrete surfaces all as specified and as directed.

M/L for PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in coping to retaining walls/steps/parapet /base of railing post etc,complete all as specified.

M&L for brick work with sub class 'B' old size brick built in cement mortar 1:6, straight or curved on plan exc 6 m mean radius including demolition of old brick work, complete all as specified.

M & L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement, complete all as specified.

Demolition of cement concrete in ground floor & paving n.exc 15 cm thick, complete all as specified.

M/L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base, complete all as specified.

M&L for Chequered cement concrete coloured tiles 25cm x 25cm x 20 mm thick, set, jointed and pointed in neat cement slurry @ 3 Kg per Sqm, with grey cement and pigment in floors over and including scred bed 20mm thick in CM 1:6, complete all as specified and as directed.

Demolition of cement Concrete (reinforced) of any description and in any position otherwise specifically provided for,complete all as specified.

M&L for RCC 1:2:4 type B1 using 20mm graded aggregate for pre cast cover slab for landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain facesmanhole set in cement mortar 1:6 incl necessary form work ,complete all as specified. (Note :- reinforcement shall be measured separately)

M&L for mild steel TMT bars 10mm dia and over,cut to length, bent to shape required,including cranking, bending spirally for hooping for coulmns,hooking ends and binding with and including mold steel wire (annealed) not less than 0.9mm dia or securing with clips etc,complete all as specified.

M/L for cement concrtee 1:2:4 type B1 using 20 mm graded stone aggregate as surface channel drains,complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc, complete all as specified.

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with Water etc,complete all as specified.

M&L for rendering 20 mm thick on stone masonary surface or surface other than fair faces of brickwork, in cement mortar 1:4, complete all as specified.

M&L for applying two coats of weatherproof paint on external surfaces including necessary preparation and including a coat of alkali resistant priming paint on new plastered surface, complete all as specified.

Material and labour for complete removal of existing treatment from old decorated surfaces of walls and applying two coats of weather proof paint on external surfaces including a coat of alkali resistant priming paint at any height of building / tower complete all as specified and as directed by Engineer-in-Charge.

Dismantaling of stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortor,complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick in floor/steps etc, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing completeall as specified and directed laid over and including scred bed 15mm thick in CM 1:6.

S&F 50 mm dia SS-304 stainless steel pipe, 2mm thickness, embedded through cutting/drilling the granite slab/brick work all as directed and make good & complete etc.

S&F SS 304 stainless steel inter locking chain of dia 6 to 8mm fixed to steel pipe by hook arrangement all as directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for tibar in chain link fencing MS falat iron MS nut bolt screw etc,complete all as specified.

Dismantling of structural steel work including doors,gates but excluding framed truss etc, complete all as specified.

M&L for providing ornamental and intricate design framed work of rolled mild steel conforming to Gde Fe 290 Gde E-165 as in gates of angle or other section with gusset plates, rails, braces, etc, to be prepared for hanging with and including either hooks & hinges or steel hanging door fittings and hanging, fastening & fixing including drilling & welding complete.

S &F 1.00 mm thick, mild steel sheet in steel gate and similar works and fixed to steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up,mitred angles etc. as directed complete all as specified.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similarsmall articles conforming to Fe-290 Gde-E-165 all as specified and as directed.

M&L for cutting holes into concrete walls with or without reinforcement upto a depth of 30cm and trimming surface as required, girth exc. 30cm ,complete all as specified.

M&L for MS work as in railing, guard bars, grill, etc conforming to Fe290 Gde E 165 all as directed by Engineer-in-Charge

Preparing old painted steel & iron surfaces of any description over 10 cm in width or girth and applying one coat of white/ approved colour/ shade synthetic enamel paint,complete all as specified.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, cladding etc, and other similar situations all as specified and directed.

Demolition of cement concrete of any description in ground floors and pavings exc 15 cm thickness,complete all as specified.

M&L for Machine pressed precast conctete interlocking paver block (coloured) any shape and size confirming to IS 15658-2006 of 80 mm providing and spreading thickness, M-40 grade laid with grey cement and pigment,complete all as specified and directed by Engr-in-Charge including providing and spreding 25 mm thick sand cushning.

M&L for Cement concrete,1:2:4, type B- 2(40mm graded aggregate) as in kerb at sides of pavement with etc,complete all as specified.

Dismantling floor, hearth or wall tiling, marble etc including cement mortar bedding, and rubbish off the premises all as specified and as directed.

Material and labour for wall cladding tiles 450mm X 150mm X 10.50mm thick with stone finish set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the colours of tiles of gate pillars including 10mm thick backin coat in cement mortar 1:3 ,complete all as specified.

Material and labour for durostone coloured tiles in floor, size 300x300x20mm thick over and including 20mm thick screed bedding in cement mortar 1:6.

M&L for 40mm thick PCC 1:2:4, type B1, (using 20mm graded stone aggregate) as in floors etc all as directed by Engineer-in-Charge.

S Y Itkar Construction and Company

Ridhi Constructions

Preeti Enterprises

H S TAKHI

Shri Sant Cosntruction

Star Construction