REPAIR/MAINT OF PUF SHELTERS IN THE AOR OF AGE B/R-1 AT PMS

Amount

Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre- painted PUF (Polyurethane Foam) insulated sandwich panels with minimum thickness 50 mm, suitably designed for structural design and safety point of view , sandwich panels in between galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick both side of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with nut bolts or self tapping screws and jointed with silicon sealant metal adhesive including cutting/making opening in PUF Shelters, if required complete all as specified and directed.

M&L for preparation of surfaces, free from oils, grease, dust and loose or friable particles. paint, cement laitance and other poorly adhering contaminants and supply, filling, insulating, filling connection joints around window and door frames, pipe entries, air-conditioning vents and roller blind housings, vertical/horizontal construction etc by applying PU based 1-component, fast curing Multi-position, highly expansive polyurethane fixing foam with the help of gun, upto depth of 75mm and width not exceeding 20mm, complete all as specified and directed.

M&L for preparation of surfaces, free from oils, grease, dust and loose or friable particles. paint, cement laitance and other poorly adhering contaminants and supply and crack filling, by applying weatherproof silicon sealant with the help of gun, upto depth of 10mm and width not exceeding 10mm complete all as specified and directed.

M&L for preparation of surfaces, free from oils, grease, dust and loose or friable particles. paint, cement laitance and other poorly adhering contaminants and supply and paste Self-adhesive, UV resistance tear resistance elastomeric bituminous sealing tape laminated with an aluminium film on the upper side. complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed.

S&F in repairs 40mm wide and 5mm thick PVC door seal (snake guard) with powder coated aluminium frame.

S&F in repair stainless steel 25 mm fancy curtain rod with conical end balls suitable for fixing as end of curtain/dropery rods complete all as specified and directed.

Taking down Aluminium window shutters any size and refixing in the same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks,, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed Note: spare part are required to be replaced deemed to included in quoated rates

Taking down Aluminium door shutters any size and refixing in the same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges etc and make smooth functioning with entire satisfaction of Engr-in-Charge complete all as specified and as directed Note: spare part except hydraulic door closer are required to be replaced deemed to included in quoated rates

S&F in repair stainless steel kitchen plate rack made out of 0.65mm thick of approved make with plugs, washers, over all size 786mmx610mmx254mm complete all as specified and directed.

S&F in repair rubber neoprene packing suitable for aluminium doors & windows for fixing glass etc complete all as specified and as directed.

S&F in repair mortice lock vertical type 100 mm mild steel 4 lever complete all as specified and directed .

Dismantling wooden boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for 18 to 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screwes to timber frame work complete all as specified and as directed.

S&F 18/19 mm thick, lead free PVC board Superior quality of density not less than 0.55 g/cm3 as in moduler shutters/cabimet drawer cupboard cabinet shutter including all frame work as specified and directed by Engr-in-Charge

S&F for magnetic door catch drawer magnet including all necessary fittings complete all as spd and directed

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including Aluminium snap beading for glazing/ paneling, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F in repair anodised aluminium snap on beading for fixing glass panes/ACP board/Particle board complete all as specified and as directed.

M&L 4mm thick ACP board (Aluminium composite panel), exterior grade, (approved colour) fixed with aluminium tapperd clip to aluminium frame work all as specified and as directed.

M&L sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square exc 0.50 sqm in each pan complete as directed.

S&F in repair aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as spd and directed.

Hacking out old broken glass ( any thickness, size,quality or description) from wooden frames/steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan in wooden frame/steel frame complete as directed.

M&L for 4mm thick figured glass, pin head type and glazing with oil putty or with brass screws in square n.exc 0.50 sqm in each pan for bathrooms/toilets ventilators complete as directed.

Welding in repairs exc 2.5cm but n exc 5cm in length with thickness of metal to be welded exc. 20mm but n.exc 25mm for windows and ventilators complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section of Fe 410 -W (Gde- E- 250) quality-A Fe with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F for Mild Steel wk as in framed roof trusses, purlins, rails and fristing incl distances pieces, cleats etc conforming to Fe 410 - O or Fe 310 - O.

S & F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as spd and directed.

M&L for joining / sealing the joints/cracks of floor/wall with White cement or equivalent to prevent the seepage through the respective joints/holes complete all as specified & directed by Engineer in Charge .

M&L for one coat of synthetic enamel paint on old steel pre painted PUF Shelter surfaces including preparation of surface of any description, over 10 cm in width or girth not other wise described by spray guns operated mechanically by expert painter for smooth finishing and also cleaning the rooms all as specified and directed by Engr-in-Charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block prepolished any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

M & L for refixing of old machine pressed precast concrete interlocking paver block 60 mm thick of any shape and size with grey cement and pigment complete all as specified and directed.

Material and labour for 25 mm thick chequered cement concrete tiles of size 30x30x25 mm mm,set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as per specification.

M&L for 16 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in CM 1:6 complete all as spd and directed.

Dismantling wall and ceiling board of any descrition complete all as specified and directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed.

S&F anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling complete all as sprcified and as directed.

S&F 4mm thick non asbestos fibre cement designer building boards fixed or laid on aluminium frame/grid with screws, complete all as spd and directed.

fixing only of 4mm thick non asbestos fibre cement designer building boards fixed or laid on aluminium frame/grid with screws in ceiling flat or sloping in repair work, complete all as specified and directed.

S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for Providing and fixing 12mm thick plaster of paris ceiling any type of design and shape (Gypsum anhydrous) to flat surface metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

M&L Rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces finished fair and even complete all as specified and directed.

M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete surfaces finished fair and even, using water proofing compound admixture (if directed) as per manufacturer's instruction, complete all as specified and directed. Note :- WPC will measuered and paid separatly under relevant item of schedule.

Supply only Liquid water proofing compound.

M&L for prepration of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified.

Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved anufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer and 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified and directed.

M&L for prepration of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces complete all as specified and directed.

Material & Labour for complete removal of existing treatment, preparation of surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer and 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new steel surfaces over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

S & F 02 mm plain fibre glass sheet fixed to windows frame,ventilators, framed iron work or in claddings/similar works with screws or nut bolts along with aluminium beading complete all as specified and as directed by Engr-in-Charge.

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sq. m each complete all as specified and directed by Engineer-in-Charge

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq.m and n.exc 2 sq. m each complete all as specified and directed by Engineer-in-Charge

Taking down chowkhat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame ) each complete all as specified and directed

Taking down chowkhat or frame with shutters exe 1.50 Sqm and not 4 sqm (without taking of shutter from frame) each complete all as specified and directed

Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with 2nd class hardwood complete all as specified..

S&F 30 mm thick Flush shutters ,solid core construction ,with block board core and plywood panels ,commercial type on both sides complete all as specified.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F stainless steel Butt hinges 100 mm long Heavy weight ,cold rolled complete all as specified and directed..

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section.

S&F 150 mm long aluminium alloy handles,fabricated type, anodised.

S & F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.

M & L for preparation of wooden surfaces and applying 02 coats of synthetic enamel paint over a coat of pink primer of any description, not otherwise described, over 10cm width or girth complete all as specified and directed.

S&F in repair PVC connection 15 mm size PTMT nuts of length ength 600 mm complete all as specified and directed.

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified.

Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness (above or below ground level) complete all as specified and directed.

M&L Hardcore of broken stones or boulders of gauge n exc. 63 mm, deposited, spread and leveliled in layers n exc. 150 mm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M & L for PCC (1:2:4) 100 mm thick Type B1 using 20 mm graded aggregate used as in floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in plinth protection and paving complete all as specified and directed.

Glass dividing strips ,38x3 mm thick and inserted in position to confirm the design .

Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store complete all as specified.

Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified.

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified.

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified.

Disconnecting existing tanks(Exc 250 & n exc 500), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as spd and directed by Engr-in-Charge.

S&F 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted including dismantling of old water tank complete all as specified and directed.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore fancy type stop valve , chromium plated concealed type cast copper alloy, screwed down , high pressure , with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) .

S&F PVC SWR pipes 150 mm bore single socketed in any length with rubber ring joint fixed to wall with PVC clamps for rain water pipes including taking down old pipes all as specified and directed . Make : Supreme/ Finolex.

S&F PVC SWR bends of 150 mm bore.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.

M & L for light shade vitrified ceramic tiles 8-10mm thick (square /rectangular ) polished , area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 15mm thick cement mortar 1:6 screed bed in double charge complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete lad over cement screed and jointed over screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finish complete all as spd and directed.

M&L for Glazed ceramic tiles Coloured 450 x 300mm 7 to 8 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 10 mm thick in CM 1:4 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed.

Demolition for brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

S & F in repairs vitreous china squatting pan, 'Orissa" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing , connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets). incl flush pipe of plyethene of low or high density of PVC 32mm dia for low level cistern all as specified and directed.

M/s sadhan kumar mukherjee (BID ID -3412494)

INDIAN CONSTRUCTION (BID ID -3412480)