Electrical Works in connection to i)Proposal for Automatic signalling system between BRP-DH (34 .76Kms) section . ii)Proposal for Automatic signalling system between SPR to CG (29.01 Kms)section .

1-NS Schedule - (Cabling and Wiring Works) 3990240.00 Below/P

"Trenching and laying of cable underground by soil cutting through suitable dia HDPE 1 pipe, without sand and bricks including refilling of trench by excavated soil and make good of surface as its original condition, (The cable trench should be of minimum 1000 mm depth).. (HDPE Pipe Make: Skipper/ Capital Polyplast/ Chaika Polymers/ Utkarsh/ Ashirvad/Arpan/Ori Plast) (L.T. Cable will be supplied by Railway)"

"Cable laying through 2" dia. GI Pipe along with supply of GI Pipe as per GeneralSpecification. (G.I. Pipe Make: TATA/ Jindal / Bansal ) (L.T. Cable will be supplied by Railway)"

"Drawing of L.T. cable through PF wall / Structure by cleating / clamping etc as per General Specification. (L.T. Cable will be supplied by Railway)"

"Drawing of LT cable in Concealed way through PF wall / structure / building wall etc. as per General specification. 'L' hook should be provided at approx. every half meter length. (L.T.Cable will be supplied by Railway)"

"Drawing of LT cable through inside of GI octagonal/tubular pole for loop in & loop out. (L.T.Cable will be supplied by Railway)"

Wiring of light point with 1.5 sq.mm PVC copper wire FRLSH through PVC conduit pipe 6 from inside JB with porcelain fuse kit-kat / MCB of rating 16 A to top of G.I Octagonal pole 5.5 mt. long along with copper ECC of size 1.5mm2 as per General specification of IE Rule. (PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab)"

"Wiring of Light and Fan points with 1.5 sq.mm., PVC insulated 1100V grade FRLSH single core, M/Strand copper wire through suitable size (ISI marked) PVC conduit 7 pipe/casing/concealed way along with ECC of 1no. 1.5 sq.mm. , PVC insulated single core, M/Strand FRLSH copper wire as per General specification of IE Rule. (PVC wire Make: Havells/Gloster/Polycab/RR Kabel/KEI/Mescab) (Switch & Plug Socket Make: Panasonic/ Anchor/ GM Modular/ Legrand/Crabtree/ Havells/Hager)"

"Supply, laying, and termination of main/sub-main wiring comprising 2 run of 6mm² 8 multi-stranded single-core copper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper Earth Continuity Conductor (ECC), through PVC conduit/casing in concealed manner. (PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab)"

"Supply, laying, and termination of sub-main wiring comprising 2 run of 4mm² single- 9 core copper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper Earth Continuity Conductor (ECC), through suitable size (ISI marked) PVC conduit pipe/casing/ concealed way . (PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab)"

"Supply, laying, and termination of sub-main wiring comprising 2 run of 4mm² single- 10 core copper conductor PVC FRLSH insulated wires, along with one run of 2.5mm² copper Earth Continuity Conductor (ECC), through G.I. conduit pipe, for shed etc. (PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/KEI/Mescab)"

Wiring of 6 Amp plug board consisting with one 6A plug socket and one 6 amp switch by 2 nos. single core FRLSH grade, PVC insulated, copper conductor wire of size 1.5 mm2, 1100V 11 grade for phase and neutral alongwith 1 no. single core FRLSH grade, PVC insulated, copper conductor wire of size 1.5 mm2, 1100V grade for Earth Continuty Conductor (ECC) through suitable size (ISI marked) PVC conduit pipe/casing/ concealed way as per General specification of IE Rule. (PVC wire Make: Havells/Gloster/Polycab/RR Kabel/KEI/Mescab) (Switch & Plug Socket Make: Panasonic/ Anchor/ GM Modular/ Legrand/Crabtree/ Havells/Hager)

Wiring of 16 Amp./ 6 pin plug board consisting with one 16A plug socket and one 16 amp switch by 2 nos. single core FRLSH grade, PVC insulated, copper conductor wire of size 4 mm2, 12 1100V grade for phase and neutral alongwith 1 no. single core FRLSH grade, PVC insulated, copper conductor wire of size 2.5 mm2, 1100V grade for Earth Continuty Conductor (ECC) through suitable size (ISI marked) PVC conduit pipe/casing/ concealed way as per General specification of IE Rule. (PVC wire Make: Havells/Gloster/Polycab/RR Kabel/KEI/Mescab) (Switch & Plug Socket Make: Panasonic/ Anchor/ GM Modular/ Legrand/Crabtree/ Havells/Hager) Above/

2-NS Schedule - (LED Luminaries) (LED luminaries should cover a

"Design of mounting layout ,Supply, installation for LED street light luminaires of approximately 45W rating, having a minimum luminous efficacy of 120lm/W. The luminaires shall be 1 housed in pressure die-cast aluminium enclosures and conform to minimum IP65 protection rating or higher. Installation/fixing of street light fitting should be made with suitable dia. G. I. bend pipe with G. I. clamps made of G. I. Flat of suitable size & G. I. Nut, bolts etc. (Make - Bajaj/ Philips/ Havells/ Crompton/ Panasonic/ Orient/ Signify/Ecolink)"

"Design of mounting layout ,Supply, installation for LED street light luminaires of 2 approximately 60W rating, having a minimum luminous efficacy of 120lm/W. The luminaires shall be housed in pressure die-cast aluminium enclosures and conform to minimum IP65 protection rating or higher. Installation/fixing of street light fitting should be made with existing/supplied arm bracket of G.I. pole / Rail pole. (Make - Bajaj/ Philips/ Havells/ Crompton/ Panasonic/ Orient/ Signify/Ecolink)"

"Designing of mounting layout, Supply, installation, connection and commissioning of 3 integrated LED TUBE LIGHT 4ft. luminaires 1 X 20W (approx.) (Extruded Aluminium LED Batten) (IP:20) (indoor type) including fixing with G. I. clamps made of G. I. Flat of suitable size & G. I. Nut, bolts etc. (Make - Bajaj/ Philips/ Havells/ Crompton/ Panasonic/ Orient/ Signify/Ecolink)"

"Designing of mounting layout, Supply, installation, connection and commissioning of LED luminaire 4ft., 2X18W or above (min. IP:65, indoor type) including batten complete with all accessories including fixing with G. I. clamps made of G. I. Flat of suitable size & G. I. Nut, bolts etc. (Make - Bajaj/ Philips/ Havells/ Crompton/ Panasonic/ Orient/ Signify/Ecolink)" Above/

3-NS Schedule - (General Electrical Works) 7672215.00 Below/P

Supply and fixing of GI fabricated cable end box, 4 way as per Sr. DEE (G)/SDAH's Drg. No. SDAH/G/MISC/40 dt. 10.12.07.

"Supply, concrete foundation & erection of GI Octagonal Pole 5.5mtr. Pole section bottom dia 150mm, top dia 75mm, pole thickness-3mm with base plate 240 x 240x16mm with 4nos. 2 foundation bolts having 25mm dia & of length 700mm along with single/double arm bracket as per General Specification. Loop in & loop out box to be provided inside the pole. Foundation and erection of G.I octagonal pole along with grouting of supplied 4 nos. foundation bolts as per Drg. No. Sr. DEE(G)'s Drg. No. SDAH/G/SS/115 dt. 23.10.09. (Make-B. P. Projects/Transrail/ Crompton/ Bajaj/ Utkarsh)"

"Concrete muffing of existing Tubular/Rail pole with provision of Thermoplastic cable 3 junction box(IP:65) with terminals including MCB ,6A,/: 10-2 nos. (Dimension of JB-200X160X98mm) (Enclosure Make:Grasp/CAPE/Hensel/Legrand) (Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/ Havells/Legrand/ Hager)"

Dismantling of existing damaged muffing and cutting of hole in the existing tubular pole where necessary.

"Supply, fixing, testing and commissioning of star rated BLDC Ceiling fan, 1200mm 5 sweep, 3 blade (Blade material :High grade Aluminium alloy),Service value:Minimum 7.5, 230V, 50 c/s, alongwith mini Fan Regulator, rotary step, 240V, 50Hz, 100W and all other accessories (Without Remote) including fixing of ceiling fan & regulator with suitable clamping arrangement &'S' hook etc. as per General Specification. (Make: Havells/ Usha/ Anchor/ Orient/ Crompton/ Bajaj/Atomberg)"

"Supply, fixing, testing and commissioning of star rated BLDC Ceiling fan, 1200mm 6 sweep, 3 blade (Blade material :High grade Aluminium alloy),Service value:Minimum 7.5, 230V, 50 c/s, and all other accessories (With Remote) as per General Specification including fixing of ceiling fan with suitable clamping arrangement &'S' hook etc. as per General Specification. (Make: Havells/ Usha/ Anchor/ Orient/ Crompton/ Bajaj/Atomberg)"

"Supply, Fixing, connection & commissioning of A.C. Exhaust Fan, 300 mm sweep, 7 230V, 50 c/s complete with all accessories including fixing with G. I. clamps made of G. I. flat of suitable size & G. I. Nut, Bolts alongwith necessary Masonry works. (Make: Havells/ Usha/ Anchor/ Orient/ Crompton/ Bajaj)"

"Supply, Fixing with suitable G.I clamping arrangement, connection and commissioning of AC Wall Bracket Fan,3 blades, 400mm sweep, approx 55W, 230V, 50Hz complete with all accessories. (Make: Havells/ Usha/ Anchor/ Orient/ Crompton/ Bajaj)"

"Supply and fixing of MCB changeover switch 40A, DP in sheet steel enclosure. (Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/ Havells/Legrand/ Hager)"

"Supply, installation, testing, and commissioning of 1 Phase, [2+4] way Distribution Board (Single door, Prewired type) comprising of the following: a) MCB SPN 32A, B/Cap - 10 kA - 1 10 No. b) MCB SP 10/20A, B/Cap - 10 kA - 4 Nos. Work shall include complete wiring terminations, provision of all necessary mounting hardware, accessories, and interconnections, executed as per site conditions and in compliance with IS/IEC standards (Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/ Havells/Legrand/ Hager)"

"Supply, installation, testing, and commissioning of 3-phase, 6-way TP&N vertical type distribution board (metal double door enclosure, IP:43 rated), comprising the following components: a) 1 No. MCCB, 4-pole, 50-63A, breaking capacity 25kA b) 18 Nos. MCB, single-pole, 16- 32A, breaking capacity 10kA The distribution board shall be fixed using suitable ISI-marked G.I. fixtures and accessories, complete in all respects as per site conditions and conforming to relevant IS/IEC standards (Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/ Havells/Legrand/ Hager) "

Supply of basic material to construct unit maintenance free earth as per RDSO specs NO. RDSO/SPN/197 Ver. 1.0 or latest and conforming to RDSO Drg No. SDP/RDSO/E&B/001 or latest. Necessary testing Certificate of UL, IEC to be produced.(1 lot = 1 job)

Installation of unit maintenance free earth as supplied in above item. The installation of this item shall be carried out by the contractor as per RDSO Specs. No. RDSO/SPN/197 Ver. 1.0 or latest and conforming to RDSO Drg No. SDO/RDSO/E&B/001 or latest.

Design, supply, installation, testing & commissioning of control & distribution Panel for colour light signaling of rating 30A, 1ph, 240V, 50Hz in 25KV AC traction system as per RDSO's specification No. TI/SPC/PSI/CLS/0020 or latest with suitable clamping arrangement.

Supply and fixing of thermoplastic outdoor type AT mast box with all accessories as per Sr.DEE/E/G/SDAH's Drg.no.SDAH/G/5/2024,dt.13.09.2024.(Enclosure Make:Grasp/CAPE/Hensel/Legrand)

"Supply and fixing of multi-plug board for Computer power points with hylam sheet cover consisting of a) Plug Socket 5Pin/6Amp. - 3 nos. b) Piano Switch 6 Amp - 3 nos. c) Plug Socket 6 Pin /16 Amp. - 1 no. d) Piano Switch, 16 Amp - 1 no. e) MCB SP 16Amp,B/cap:10KA. - 1 no. f) LED 16 indication lamp - 1no. including wiring with 2.5 mm2 single core, multi strand, PVC FRLS Cu wire through suitable size (ISI marked) PVC conduit pipe/ casing/ concealed way and along with copper ECC of size 1.5mm2 as per general specification. (PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab) (Switch & Plug Socket Make: Panasonic/ Anchor/ GM Modular/ Legrand/Crabtree/Havells/Hager) (Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/ Havells/Legrand/ Hager)"

"Supply and fixing of Mobile Charging points with hylam sheet cover consisting of a) Plug Socket 5Pin/6Amp. - 3 nos. b) Piano Switch 6 Amp - 3 nos. c) MCB SP 6Amp, B/cap10KA. - 1 no. d) LED indication lamp - 1no, including wiring with 2.5 mm2 single core, multi strand, PVC FRLS Cu 17 wire through suitable size (ISI marked) PVC conduit pipe/ casing/ concealed way and along with copper ECC of size 1.5 mm2 as per general specification. (PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/ KEI/Mescab) (Switch & Plug Socket Make: Panasonic/ Anchor/ GM Modular/ Legrand/Crabtree/ Havells/Hager) (Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/ Havells/Legrand/ Hager)"

"Supply & fixing of AC power unit in enclosure with MCB DP 32A/25A, Starter rating G/H/J or equivalent. (Make: North West/ Lauritz Knudsen /ABB/ Siemens/ C&S/ Crabtree)"

"Supply & fixing of AC power unit in enclosure with RCCB DP, 25A, sensitivity 30mA Starter rating G/H/J or equivalent. (Make: North West/ Lauritz Knudsen /ABB/ Siemens/ C&S/ Crabtree)"

"Supply,fixing,testing and commissioning of light control panel with contactor and electro mechanical timer comprising of the following - 1) MCB 32A, Three pole,10KA,415V,50Hz - 1 No., 2) Timer switch- 2 Nos., 3) Power Contactor,3pole,32A - 2 Nos., 4) Toggle switch 6A - 2 Nos., 5) 20 LED Indicators, Indication R,Y,B - 5 Nos. 6) Enclosure made of 14SWG GI sheet fabrication, Panel paint powder coated colour siemens gray and internal wiring with suitable size copper wire etc. (As per Sr.DEE/G/SDAH's drawing number, SDAH/G/1/2024 Dt. 26.02.2024).Fixing should be done by necessary GI fixture and connection with 70%,30% lighting circuit. (Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/ Havells/Legrand/ Hager)"

"Supply and installation of GI Standard Earth pipe, 40 mm dia, 2000 mm long, 21 medium gauge complete with provision of Earth pit and there connection with 4 SWG GI wire complete with testing and commissioning, strictly in accordance with relevant IS codes, electrical safety standards.as per Sr. DEE(G)/SDAH's Drg. No. SDAH/G/MISC/47 dt.21.11.2008(Alt-1). (G.I. Pipe Make: TATA/ Jindal / Bansal )"

Supply and installation of G.I. strip of size 25 mm x 3 mm (thick), fixed along walls by 22 grouting suitable size bolts with nuts at 450 mm intervals for earthing, including provision of necessary connections. The G.I. strip shall be separated from the wall using suitable size insulators with the bolts. The work shall be completed with testing and commissioning, strictly in accordance with relevant IS codes, electrical safety standards. Above/

"Supply of 5 star rated Inverter type Split Air-conditioner of capacity 2 TR, 230V, 1 Ph. 50 Hz compressor type: Rotary complete with all accessories as per General Specifications including 1 Installation/re-installation of indoor unit and outer unit and connection by 3/8"" and 5/8"" or a s per machine size copper tube with suitable clamping arrangement and covering the tube with insulation including loading, unloading & transportation of the materials. (Make: Hitachi/ Daikin/ OGeneral/ Mitsubishi / Carrier/ Panasonic/ Voltas/ Samsung/ Haier)"

Supply & fixing of M. S. angle frame on the wall for outer unit of size approx.: 3' x 4' and made from 1½ inch x 1½ inch x 4 mm thick M.S. angle. Frame should be painted with black Japan paint.

Supply of additional 5/8" copper tube and soldering with existing tube including supply of insulation and inserting the same on additional copper tube.

Supply of additional copper pipe of dia 1/4" for Air conditioning machine and soldering with existing tube including supply of insulation and inserting the same on additional copper tube.

Supply and fixing of 4 core x 2.5 mm 2 PVC insulated, sheathed flexible copper conductor cable for power connection between outdoor and indoor unit of split A.C. unit complete as required. (PVC Wire Make: Havells/ Gloster/ Polycab/ RR Kabel/KEI/Mescab

Supply of 5/8" PVC pipe unbreakable for drainage of water.

Supply & charging of fresh Refrigerant gas(R-32/ R410A or similar Eco-friendly Refrigerant). Above/

5-NS Schedule - (Temporary Illumination) 985840.00 Below/P

"Temporary arrangement for illumination for NI work consisting of the following items in operation for the period of 18:00hrs to 06:00 hrs:- i)02 nos of 5KVA(4KW) DG set including fuel and operator. ii) 10 nos of 150W LED fitings with lamp and all other accessories/LED flood light 1 fittings 100W and all accessories. iii) 05 nos of 9W LED Bulb with holder and all other accessories/1X18W LED fittings and all accessories. iv) 02 nos board,each consisting of 02 nos 5/15A plug socket with switch and all accessories. v) Main/Sub-main line with 10/6/4 sq.mm PVC coppper wire of approx 1000 mt length. vi) 02 nos pedestal fan/ceiling fan with connection. (12 location x 2 sets per day X 2 days=48 sets)"