Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹28.2 L+₹1.3 L (4.76%)Rejected-Finance 86 CHAK16 QAZIPURA TANDA RAMPUR UTTAR PRADESH 244925 | RAMPUR | UTTAR PRADESH | 244925 | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹30.8 L+₹3.9 L (14.5%)Rejected-Finance | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹31.4 L+₹4.5 L (16.6%)Rejected-Finance | L4 | Rejected-Finance Being not lowest | |
| 5 | L5₹32.2 L+₹5.3 L (19.8%)Rejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L5 | Rejected-Finance Being not lowest |
| Sl No | Description | Qty | Unit | Anil Industrial Corporation L5 | Nilesh Construction L7 | SN CONSTRUCTION L1 | SHREE SHIV SHANKER ENTERPRISE L3 | HINDUSTAN BUILDERS L6 | SAHI SAGAR ENTERPRISES L9 | N F ENTERPRISES L2 | RUPESH CONSTRUCTION CO L8 | binta construction L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling roof (corrugated, semi corrugated etc) sheets in roof coverings including ridges, complete all as specifed and directed. | 780 | Sqm | 8 ₹6,240 | 9 ₹7,020 | 10 ₹7,800 | 5 ₹3,900 Lowest | 10 ₹7,800 | 5 ₹3,900 Lowest | 10 ₹7,800 | 10 ₹7,800 | 50 ₹39,000 |
| 2.00 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. | 66 | Qtl | 123 ₹8,118 | 110 ₹7,260 | 50 ₹3,300 | 250 ₹16,500 | 100 ₹6,600 | 100 ₹6,600 | 10 ₹660 Lowest | 100 ₹6,600 | 100 ₹6,600 |
| 3.00 | S&F for Rolled mild steel sections conforming to Gde Fe-290 (Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates, complete all as specifed and directed. | 6,600 | Kg | 88 ₹5,80,800 | 94 ₹6,20,400 | 90 ₹5,94,000 | 95 ₹6,27,000 | 100 ₹6,60,000 | 95 ₹6,27,000 | 85 ₹5,61,000 | 94 ₹6,20,400 | 72 ₹4,75,200 Lowest |
| 4.00 | M&L for Preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specifed and directed. | 300 | Sqm | 45 ₹13,500 | 46 ₹13,800 | 30 ₹9,000 | 40 ₹12,000 | 50 ₹15,000 | 40 ₹12,000 | 25 ₹7,500 Lowest | 50 ₹15,000 | 40 ₹12,000 |
| 5.00 | M&L Multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufacture out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with ttoal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof, complete all as specified and directed by Engr-In-Charge. | 700 | Sqm | 567 ₹3,96,900 | 639 ₹4,47,300 | 470 ₹3,29,000 Lowest | 700 ₹4,90,000 | 700 ₹4,90,000 | 600 ₹4,20,000 | 600 ₹4,20,000 | 630 ₹4,41,000 | 690 ₹4,83,000 |
| 6.00 | M&L Multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume plain steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufacture out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with ttoal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof,complete all as specified and directed by Engr-In-Charge. | 80 | Sqm | 567 ₹45,360 | 599 ₹47,920 | 450 ₹36,000 Lowest | 675 ₹54,000 | 650 ₹52,000 | 600 ₹48,000 | 600 ₹48,000 | 550 ₹44,000 | 610 ₹48,800 |
| 7.00 | Demolition/ taking down existing roof treatment including PCC padding by picking sweeping, cleaning and washing down with water to remove dust, durt etc and brushing neat cement slurry @ 3 Kg/Sqm, complete all as specifed and directed. | 1,000 | Sqm | 23 ₹23,000 | 110 ₹1,10,000 | 10 ₹10,000 Lowest | 10 ₹10,000 Lowest | 100 ₹1,00,000 | 50 ₹50,000 | 60 ₹60,000 | 140 ₹1,40,000 | 100 ₹1,00,000 |
| 8.00 | M&L PCC padding 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) of uniform thickness 25 mm average top surface of pain cement concrete padding shall be furnished even and smooth without using extra cement, complete all as specifed and directed. | 1,000 | Sqm | 167 ₹1,67,000 | 110 ₹1,10,000 | 200 ₹2,00,000 | 100 ₹1,00,000 Lowest | 150 ₹1,50,000 | 250 ₹2,50,000 | 120 ₹1,20,000 | 210 ₹2,10,000 | 120 ₹1,20,000 |
| 9.00 | M&L 15 mm thick screed bed ing CM 1:4, complete all as specifed and directed. | 1,000 | Sqm | 123 ₹1,23,000 | 143 ₹1,43,000 | 100 ₹1,00,000 | 100 ₹1,00,000 | 75 ₹75,000 | 100 ₹1,00,000 | 50 ₹50,000 Lowest | 90 ₹90,000 | 120 ₹1,20,000 |
| 10.00 | M & L for applying Bituminious primer on roof surface conforming to IS-3384 bof 1986 @ 0.70 Kg/sqm and applying APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with non-woven polyster matt laid on primed surface by torch application complete all as specified with overlap of 100 mm overlap to be thermo fushed by flame, complete all as specifed and directed. | 1,000 | Sqm | 499 ₹4,99,000 | 440 ₹4,40,000 | 395 ₹3,95,000 | 365 ₹3,65,000 Lowest | 400 ₹4,00,000 | 405 ₹4,05,000 | 400 ₹4,00,000 | 400 ₹4,00,000 | 490 ₹4,90,000 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
14 Jul 2025, 6:00 pmClosed
Kameshwar Prasad, IDSE, EE
GE(West), Colaba, Mumbai
Repairs to waterproofing treatment, galvalume sheet roofing, misc B/R works at certain Md and OTM Accn of Area-III (NML Area) and Periodical services of certain Bldgs, other misc repair works of Area-II under AGE B/R Central at Colaba, Mumbai
2025_MES_716228_1
8989/E8
Open Tender
Civil Works
Item Rate
270 days
GE(West), Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (W) Colaba, Mumbai
₹1 L
Yes
5 Sept 2025
23 Jun 2025
16 Jul 2025
23 Jun 2025
14 Jul 2025
7 Jul 2025
Amount
Dismantling roof (corrugated, semi corrugated etc) sheets in roof coverings including ridges, complete all as specifed and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
S&F for Rolled mild steel sections conforming to Gde Fe-290 (Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates, complete all as specifed and directed.
M&L for Preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specifed and directed.
M&L Multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume corrugated steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufacture out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with ttoal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof, complete all as specified and directed by Engr-In-Charge.
M&L Multi-rib TM profile high tensile 550 MPA yield strength colour coated galvalume plain steel sheet having maximum pitch of 250mm, c/c and minimum 30mm crest depth in length as per site requirement. The feed material is to be manufacture out of 0.50mm (TCT). Total coated thickness with 18-20 microns top coat over 5 microns primer and 8-10mm alkyd backer, zinc aluminium alloy of AZ-150. The sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium (55%)and silicon (1.5%) with ttoal mass coating of 150 gms/sqm on both sides. Covered width will be 1020mm and sheet length as per site requirement. The profile is having return leg for proper side lap. The sheet shall be fixed using self drilling/self capping screws with EDPM seal or fixed with 'L' or 'J' type or cranked hook bolts in roof,complete all as specified and directed by Engr-In-Charge.
Demolition/ taking down existing roof treatment including PCC padding by picking sweeping, cleaning and washing down with water to remove dust, durt etc and brushing neat cement slurry @ 3 Kg/Sqm, complete all as specifed and directed.
M&L PCC padding 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) of uniform thickness 25 mm average top surface of pain cement concrete padding shall be furnished even and smooth without using extra cement, complete all as specifed and directed.
M&L 15 mm thick screed bed ing CM 1:4, complete all as specifed and directed.
M & L for applying Bituminious primer on roof surface conforming to IS-3384 bof 1986 @ 0.70 Kg/sqm and applying APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with non-woven polyster matt laid on primed surface by torch application complete all as specified with overlap of 100 mm overlap to be thermo fushed by flame, complete all as specifed and directed.
M&L Applying one coat of aluminium paint at the rate of 100 gms/sqm as per manufacturers instructions over bituminous layer, complete all as specifed and directed.
M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in lintel up to 1.5 m clear span,cills, steps, seismic and other similar bands, plinth course, lacing cource, parapet, railing, coping, apex stone, bed plate, kerb slightly rounded, including necessary formwork, complete all as specifed and directed.
Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MOD land, complete all as specifed and directed. Note : Height of Bldg up to 4th floor.
Material and labour for 15mm thick plaster in layer on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed.by Engr-In-Charge. Note : Height of Bldg up to 4th floor.
Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm over new surface authorized applicator only including use of scaffoldings, complete all as specifed and directed.
Material and labour for 10 mm thick Plaster in single layer of, on other than fair faces of concrete surfaces in wall (internal surface) and finished even and smooth without using extra cement, complete all as specified and directed. by Engr-In-Charge.
Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade, complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MOD land, complete all as specified and directed.
Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6, complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15 mm bore, complete all as specified and directed.
S&F Steel tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 15 mm bore, complete all as specified and directed.
Demolition and breaking up drain pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar, complete all as specifed and directed.
S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore incl clamps, complete all as specifed and directed.
S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75 mm bore incl clamps, complete all as specifed and directed.
S&F for PVC (SWR) bends any radius, 110 mm bore, complete all as specifed and directed.
S&F for PVC (SWR) bends any radius, 75 mm bore, complete all as specifed and directed.
S&F for PVC (SWR) branch piece, single (single Y) equal or unequal radius, 110 mm bore, complete all as specifed and directed.
S&F for PVC (SWR) branch piece, single (single Y) equal or unequal radius, 75 mm bore, complete all as specifed and directed.
S&F for PVC (SWR) branch piece, single (single T) equal or unequal radius, 110 mm bore, complete all as specifed and directed.
S&F for PVC (SWR) branch piece, single (single T) equal or unequal radius, 75 mm bore, complete all as specifed and directed.
S&F for PVC (SWR) reducers, 110 mm, complete all as specifed and directed.
S&F for PVC (SWR) reducers, 75 mm bore, complete all as specifed and directed.
S&F for PVC (SWR) vent cowl, 110 mm bore, complete all as specifed and directed.
M&L for Preparation of new plastered or unplastered surface of wall including cornices etc. by washing, rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coats of white wash on new surface of ceiling, complete all as specified and directed.
Firstly old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement spry 3.00 Kg per sqm by paint brush over cleaned surfaces and Material and Labour for 20-50 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished even and fair Including three coat white wash, complete all as specified and directed by Engr-in-Charge.
Material and Labour for old plastered or unplastered surface of wall including cornices etc. by washing, rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coatsfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004,Alkali & fungal resistance,dirt resistance exterior paint of required shape (Company Depot Tinted) with silicon additives @ 1.43 liter/10Sq m over and including priming coat of exterior primer applied @ 0.90 liter /10Sqm over new surface authorized applicator only including use of scaffoldings, complete all as specified and directed. Note : Up to 4th floor.
Ditto all as per item No. 36 but 5th to 8th floor, complete all as specified and dirceted.
M&L Preparing old decorated surface by washing rubbing down and stopping of distempered and painted surfaces of walls and applying two coat of distemper oil emulsion white or tinted over a coat of wall putty, complete all as specified and directed.
M&L Preparing old painted wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L Preparing old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MOD land, complete all as specifed and directed. Note : Height of Bldg 5th to 8th floor.
Material and Labour for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat alkali resistant primer coat over a coat of 1mm thick wall care putty putty through authorised applicators of paint manufacturers only of approved shade, complete all as specifed and directed.
Material and labour for 15mm thick plaster in layer on fair faces of brick wall or concrete surfaces, finished even and fair, including use of scaffolding, complete all as specified and directed.by Engr-In-Charge. Note : Height of Bldg 5th to 8th floor.
Supply only integral water proofing compound.
M & L for Preparing new surfaces of walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings from Ground floor upto 04 storeys bldgs, complete all as specified and directed.
Ditto as per item No. 45 but 5th to 8th floor, complete all as specified and directed.
M&L for Injecting chemical GLYPHOSATE 41 percent soluion 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water) and removing the plants/vegetation with penetrated roots complete including all necessary scafolding arrangments upto 04 storeys, complete all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ palnts with above treatment to the entire satisfaction of Engineer-in-Charge.
Ditto as per item No. 47 but 5th to 8th floor, complete all as specified and directed.
Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles. and removing debris out of MD land, complete all as specified and directed.
Material and Labour for first and premium quality of non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile excedding 0.06 sqm but n. exc 0.11 sqm in floors etc set and joimted in neat cement sluury and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specifed and directed.
Material and Labour for first and premium quality of Glazed ceramic coloured tiles in vertical surface 600x300x7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4, complete all as specifed and directed.
Material and Labour for Vetrified ceramic tiles Dark shade 7 to 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sq.m in floors etc and jointed in neat cement slurry and pointed in whitebor coloured cement ( and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specifed and directed.
Material and Labour for Vetrified ceramic tiles Dark shade 7 to 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sq.m in vertical surfaces etc and jointed in neat cement slurry and pointed in whitebor coloured cement over and including 10 mm thick rendering or backing layer in cement mortar 1:4, complete all as specifed and directed.
Demolition of Stone slab and tile of any description or thicknee in floors, apron etc, complete all as specifed and directed.
Material and Labour for Granite stone best quality (of any type) tiles 18 to 20 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 including dismentling of stone slab, complete all as specifed and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specifed and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 20 mm bore complete all as specified and directed
Supply & fixing UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc complete. complete all as specified and directed
Supply & fixing UPVC pipes out side dia 20 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc complete. complete all as specified and directed
S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 20 mm bore complete all as specified and directed
Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 15 mm bore complete all as specified and directed
Refixing old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 20 mm borecomplete all as specified and directed
Supply & fixing in repairs vitreous china white wash basin flat back size 550 x 400mm including coupling 32mm dia, waste pipe, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand, complete all as specified and directed.
Supply & fixing in repair for pillar taps cost copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed, complete all as specified and directed.
Supply & fixing in repair Chromium plated brass angle valve for 15mm bore pipe, fixed in repairs, complete all as specified and directed.
Supply & fixing in repair PVC flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket, complete all as specified and directed.
Supply & fixing in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, complete all as specified and directed.
S&F in repair bib taps cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed.
Supply & fixing in repair, two way angle valve cock chromium plated brass fancy type bore 15mm, complete all as specified and directed.
Supply & fixing Health foucet including PVC pipe 1.50m long with brass nuts for EWC, fixed in repairs, complete all as specified and directed.
Supply & fixing in repair vitreous china wash down water closet of Pedestal pattern white including seat cover making connection to trap and to flushing pipe etc complete and making good to floor, complete all as specified and directed.
S&F, in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.
N F ENTERPRISES (BID ID -3358197)
SHREE SHIV SHANKER ENTERPRISE (BID ID -3357936)
binta construction (BID ID -3358248)
Anil Industrial Corporation (BID ID -3349977)
HINDUSTAN BUILDERS (BID ID -3358333)
Nilesh Construction (BID ID -3357391)
RUPESH CONSTRUCTION CO (BID ID -3358523)
SAHI SAGAR ENTERPRISES (BID ID -3358526)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .