PROVN OF BACK SIDE BOUNDARY WALL ALONGWITH HOSPITAL AND RAILWAY QUARTERS UNDER GE (EAST) JALANDHAR CANTT

Amount

Excavation in trenches in soft /loose soil, n. exc. 1.5 m wide and n. exc. 1.5m in depth for pipe line drains and getting out complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed..

Removing excavated soil to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth complete all as specified and directed

Material and labour for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work finished fair & even complete all as specified and directed

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour for RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, mass concrete and bases for columns etc complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in beams, bressumers, cantilevers, lintels over 1.5m span complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular in rough finished surfaces of concrete complete all as specified

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified

Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets, sag rods (for securing chain link fencing etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-410 or Fe-310 complete all as specified and directed.

Material and labour for galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. fixed complete all as specified and directed Note : Each line wire to be measured separately.

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dee Kay EnterPrises

M/S Vinod Kumar

Motorway Constructions