UJHANA- AUGMENTATION OF WA...

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: EE PHED Narwana

Name of Work 5th year Operation and maintenance

Contract No: 01684-298555

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description NS Item Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1.1 Providing and fixing of 300 mm Zero velocity valve IVC/VAG/Kirloskar make of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect for the satisfaction of the Engineer-in-Charge . 1 No. 0 Excess(+) Full Conversion INR

1.2 Supply and fixing of chain pulley block of 5 ton capacity including cost of steel wire, chain full length etc. complete in all respect including cost of 2.50 mter. high piller, Gantry garderwith moving swivel arm of suitable length for lifting pumps from the sump to the ground level with paltform and complete in all respect. 1 Each 0 Excess(+) Full Conversion INR

1.3 Construction of Water proof Shed for Transformer and DG set of required size with MS railing including material ISI make complete in all respect. 1 Each 0 Excess(+) Full Conversion INR

1.4 Supplying, erection, testing and commissioning of Horizontal submersible open well pumping set of raw water having head 12.00 m as requirements of discharge in 1600 LPM and power capacity in 10.00BHP as ISI Marked 2 Each 0 Excess(+) Full Conversion INR

1.5 Design construction, testing and commissioning of 2.50 MLD capacity Water Treatment Plant including inlet channel, Alum dozing Flash mixing, Clarifloculator, filter box, over head Reservoir for back wash, waste water tank including all civil work, Pumping machineries and electric cabling. Control panels entire piping network of suitable size, laying the DI pipe from raw water pump to inlet box of WTP, WTP to CWT. and Suction Well for CW including DI specials, suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house include chlorination equipment and arrangement of flow measurement and sand bed complete in all respects as per NIT (BASED ON SCADA SYSTEM- 2.50 MLD) 2 Job 0 Excess(+) Full Conversion INR

1.6 Construction of HT/LT Panel room, PLC room, Centrifuge house, blower room and Lab cum office building including doors, window and fitting with toilet block including sanitary fittings STP site covered area with RCC framed structure of brick work vitrified glaze tiles flooring, powder coated aluminum frame of size 100mm x 45mm of 10 gauge for chowkhat frame, 75mm x 45mm of 10 gauge for door frame, 45mm x 45mm of 10 gauge for window frame, 5mm thick glass AIS/Saint Gobin/Modi Float, covered area 1 sqm. 300 sqm 0 Excess(+) Full Conversion INR

1.7 Supply of electrically driven vacuume pump ( Suitable capacity) of ISI make along with glass, reflector, GI pipe fitting, gate valve, base coupling and other acessoseries complete in all respect. 1 Each 0 Excess(+) Full Conversion INR

1.8 Design, Supply and erection of transformer of HT metering pannel of standard make required rating indoor type 11 KVA VCB Pannel with entire cable network from GO switch to HT Metering and HT metering ot transformer complete in all respect. 1 Each 0 Excess(+) Full Conversion INR

1.9 Providing and fixing LT panel board suitable for 3 phase for wire AC supply with Bus Bar for running of 5 No. electric motor of 10 BHP to 35 BHP with complete in all accessories. 2 Each 0 Excess(+) Full Conversion INR

2 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 2 no. 10.00 BHP RAW water induction Motor `a) Main switch 63 Amp.1 Nos.. (L and T Siemens, ABB). (b) CT 100/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 2 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 2 No. (h) Indicating Lamp-One Set (i) Change over switch 63 Amp. = 1 No. each ` 2 Each 0 Excess(+) Full Conversion INR

2.1 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 2 no. 50.00 BHP clear water induction Motor ) (a) Main switch 150 Amp.1 Nos.. (L and T Siemens, ABB). (b) CT 100/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 2 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 2 No. (h) Indicating Lamp-One Set (i) Change over switch 150 Amp. = 1 No. each 2 Each 0 Excess(+) Full Conversion INR

2.2 Supply, Installation, testing, Commissioning with one year warranty Electromagnetic Flowmeter along with its installation complete in all respect as per specifications. Size as per site requirement.(IP-68), RS-485 ModBus. Line Size 200mm, installed at Pump End/Source 2 Each 0 Excess(+) Full Conversion INR

2.3 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 2 no. 15.00 BHP clear water induction Motor (a) Main switch 63 Amp.1 Nos.. (L and T Siemens, ABB). (b) CT 100/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 2 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 2 No. (h) Indicating Lamp-One Set (i) Change over switch 63 Amp. = 1 No. each 1 Each 0 Excess(+) Full Conversion INR

2.4 Less credit of Old Bricks bats...... 270 Cum 0 Less(-) Full Conversion INR

2.5 credit of old bricks 194400 No. 0 Less(-) Full Conversion INR

2.6 Providing and fixing clear water pumping machinery 4000 LPM x 35 M Head for filling 3 No Boosting station 1,2 and 3..... 2 Job 0 Excess(+) Full Conversion INR

2.7 credit of old steel 5766 Kg 0 Less(-) Full Conversion INR

2.8 Supplying, erection, testing and commissioning or Horizontal motor pumping set of Raw water having head 12.00 m as requirements of discharge in 1600 LPM and power capacity in 7.50 BHP as ISI Marked Raw water 1600 LPM x 7.50 BHP x 12m head at ww 2 Each 0 Excess(+) Full Conversion INR

2.9 Supply,fixing testing and commissioning of C.I. Sluice Gate of Size 600x600 mm with all accessories of ISI make complete in all respect 1 One Unit 0 Excess(+) Full Conversion INR

3 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 2 no. 20.00 BHP Clear water induction Motor ) a) Main switch 100 Amp.1 Nos.. (L and T Siemens, ABB). (b) CT 200/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 2 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 2 No. (h) Indicating Lamp-One Set (i) Change over switch 100 Amp. = 1 No. each 1 Each 0 Excess(+) Full Conversion INR

3.1 Providing and Fixing PVC insulated 10 sq. mm copper wire 3.50 core ISI mark for connection of Induction motor including thimble and jointing complete in all respect. 400 Per Mtr 0 Excess(+) Full Conversion INR

3.2 Providing and Fixing PVC insulated 16 sq. mm copper wire 3.50 core ISI mark for connection of Induction motor including thimble and jointing complete in all respect. 360 Per Mtr 0 Excess(+) Full Conversion INR

3.3 Crossing of National Highway 352 with 450 mm i/d HDPE Pipe with trenchless method with material and labour complete in all respect as required at site… 60 Per Mtr 0 Excess(+) Full Conversion INR

3.4 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 2 no. 20.00 BHP RAW water induction Motor ) `a) Main switch 63 Amp.1 Nos.. (L and T Siemens, ABB). (b) CT 100/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 2 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 2 No. (h) Indicating Lamp-One Set (i) Change over switch 63 Amp. = 1 No. each ` 1 Each 0 Excess(+) Full Conversion INR

3.5 Credit of old Pumping machinery Supplying, erection, testing and commissioning of Horizontal motor pumping set of raw water having head 12.50 m as requirements of discharge in 1500 LPM and power capacity in 7.5.BHP as ISI Marked 2 Each 0 Less(-) Full Conversion INR

3.6 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 2 no. 7.5 BHP RAW water induction Motor ) `a) Main switch 63 Amp.1 Nos.. (L and T Siemens, ABB). (b) CT 100/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 2 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 2 No. (h) Indicating Lamp-One Set (i) Change over switch 63 Amp. = 1 No. each ` 2 Each 0 Excess(+) Full Conversion INR

3.7 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 2 no. 35.00 BHP clear water induction Motor ) `a) Main switch 150 Amp.1 Nos.. (L and T Siemens, ABB). (b) CT 100/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 2 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 2 No. (h) Indicating Lamp-One Set (i) Change over switch 150 Amp. = 1 No. each` 1 Each 0 Excess(+) Full Conversion INR

3.8 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 2 no. 15.00 BHP clear water induction Motor ) (a) Main switch 150 Amp.1 Nos.. (L and T Siemens, ABB). (b) CT 100/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 2 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 2 No. (h) Indicating Lamp-One Set (i) Change over switch 150 Amp. = 1 No. each 2 Each 0 Excess(+) Full Conversion INR

3.9 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 900 x 1200 mm and 400 mm deep having following accessories:- ( Suitable for 1 no. 30.00 BHP clear water induction Motor ) at Water Works no.1 for filling Boosting Stations `a) Main switch 100 Amp.1 Nos.. (L and T Siemens, ABB). (b) CT 100/5 Nos. (AE/KAPPA/ LandT) (c) Digital Multi Function meter = 2 no. (d) SPP 1 No. of approved make (e) Motor starter, star delta 1 Nos. (LandT Simens, AAB) (f) VSS 1 No. and ASS 1 No. of approved make (g) Capacity KVAR as per site requirement = 2 No. (h) Indicating Lamp-One Set (i) Change over switch 100 Amp. = 1 No. each ` 2 Each 0 Excess(+) Full Conversion INR

4 Providing and laying of 250 mm i/d D.I pipe through 400 mm M.S casing pipe under NH-352 by trenchless method complete as per N.H. specification including cost of material, labour and all other safety measures required during execution of work. 60 Per Mtr 0 Excess(+) Full Conversion INR

4.1 Providing and laying of 300 mm i/d D.I pipe through 450 mm M.S casing pipe under NH-352 by trenchless method complete as per N.H. specification including cost of material, labour and all other safety measures required during execution of work. 60 Per Mtr 0 Excess(+) Full Conversion INR

4.2 Laying of 450 mm o/d HDPE Pipe through Prov. and fixing 600 mm M.S. casing Pipe under NH-352 by trenchless method complete as per N.H. specification including cost of material, labour and all other safety measures required during execution of work. 60 Mtr 0 Excess(+) Full Conversion INR

4.3 Laying of 315 mm o/d HDPE Pipe through prov.and fixing 450 mm M.S. casing Pipe under NH-352 by trenchless method complete as per N.H. specification including cost of material, labour and all other safety measures required during execution of work. 60 Mtr 0 Excess(+) Full Conversion INR

4.4 Supply ,erection testing and commissioning of Horizontal motor pumping set of raw water having head 60.00 m as requirements of discharge 4200 LPM and power capacity 100.00 BHP as ISI Marked 3 Nos. 0 Excess(+) Full Conversion INR

4.5 Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 1500 mm and 400 mm deep having following accessories:- ( Suitable for 3 no. 100.00 BHP) 3 Each 0 Excess(+) Full Conversion INR

4.6 “Design, construction, erection, testing and commissioning of 2.50 MLD capacity Sewage Treatment Plant based on Sequential Batch Reactor (SBR) Technology complete in all respect including, Landscaping, MCC Panel Room and all other contingent Electrical, Mechanical, Electromagnetic Flow Measurement Device on inlet and outlet, Real Time water quality monitoring with Data collection system (Online analyzer) Piping and Instrumentation works with PLC and SCADA Arrangement for STP along with Synchronizing it with each other including furniture and laboratory equipments as per detail given in the bid document and including following components. 1 Each 0 Excess(+) Full Conversion INR

4.7 NS Item -MAIN PUMPING STATIONS 2.50 MLD Desig 1 Each 0 Excess(+) Full Conversion INR

4.8 n, construction, erection, testing and commissioning of MPS and following components.RCC Inlet chamber, Screen Chamber, rectangular collecting tank suitable size for 2.50 MLD average flow with peak factor of 3.00, landscaping of the campus providing and installing of 5 No. Pumping Set of i.e.1 no.5300 LPM (312.5 cum per hour), 2 no. 1800 LPM (104.17 Cum per hour) and 2 no. 900 LPM (52.08 Cum per hour) with 35 mtr. Head each suitable LT panel equipped with all safety devices, automatic capacitor bank and submersible cable form LT panel to pump sets complete in all respect..K9 DI pipe of suitable dia at MPS including welding and screwing of flanges, ISI marked D.I. fittings, Sluice valves, Flow measurement devices as per requirements complete in all respect.3 Nos. CI Gear Operated Sluice Gate with SS Spindle (SS 410) and seats (SS 304) (2 nos. for screen and 1 no. for partition of collecting tank) as per design. Supply and installation of 2 Nos. mechanical course screens of minimum length 6 mtr for 2.50 MLD average flow with peak factor of 3.0:-i) The connecting sewer of same diameter and material of construction, laid at adequate depth between existing sewers to newly constructed structures is included in this scope of work.ii) All the infrastructure except construction of staff quarter, and path ways/ roads required to be executed at site to make the MPS functional is included in the scope of work for lump-sump job.iii) All the pumping machinery, panel board, Level sensor etc shall be controlled by PLC and SCADA and shall be synchronized with PLC panels at MPS site through broadband internet facility. Providing and Installing CCTV 2 Cameras for MPS complete as per satisfaction of the Engineer– in- Charge, within 96 hours of signing the Agreement along with 90 days recording (DVR), 32 inch LED Screen, 16 Channel DVR at STP Site and 8 Channel DVR at MPS Site with connectors, cables, poles and power supply with online real-time output facility. The cameras at MPS shall be synchronized at MPS site. Make: - CP Plus Internet Protocol minimum 5 MP WDR, Night vision color mode 2.4.2 12 mm very focal with extra IR, CCTV Cameras should be installed and commissioned before starting execution of work.....1 1 Per Job 0 Excess(+) Full Conversion INR

4.9 1st year Operation and maintenance after defect liability period 1 Per Job 0 Excess(+) Full Conversion INR

5 Operation and Maintenance of water supply scheme (including existing structure of entire scheme after commissioning the scheme) and entire sewerage scheme and complete scope of work mentioned in DNIT in village as per schedule-IV for a period of 5 years after 12 months defect liability period and 3 months trial run period. (Will be charged to the A/mtc estimate). Complete in all respects as per approved NIT.( Disinfection material will- be supplied by the Public Health Engineering Department) 1) Operation and maintenance during defect liability period after 3 month trial run period (operation only) 1 Per Job 0 Excess(+) Full Conversion INR

5.1 3rd year Operation and maintenance 1 Per Job 0 Excess(+) Full Conversion INR

5.2 2nd year Operation and maintenance 1 Per Job 0 Excess(+) Full Conversion INR

5.3 4th year Operation and maintenance 1 Per Job 0 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Quoted Rate in Words

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EE PHED Narwana

Name of Work 5th year Operation and maintenance

Contract No: 01684-298555

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Item Description HSR Item BI01010001010000000000000515BI0100001112 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

1.1 5th year Operation and maintenance BI01010001010000000000000515BI0100001113 1 Nos 373923409.4 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words