COMPREHENSIVE DAY TO DAY BR AND EM MAINT SERVICES IN ZONE B MD ACCN AREA AT INS RAJALI NAS ARAKKONAM

Amount

Petty repairs to joinery works such as easing of doors/ windows/ kitchen cabinets , refixing builder hardware gauze etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engneer In Charge. Note :(i) Replacement of builders hardware if required shall be measured and paid separately.

Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps/ pillar taps/ mixers/ stop cocks etc. by tightening and providing washer, repair to float valves, low leveled cistern by mixture adjustments, leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon tapes and including small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engneer In Charge. Note : (i) Replacement of fittings and fixture like Bib tap, stop cock, Pillar Tap etc. if required shall be measured and paid separately.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Taking down shutters and refixing Resecuring, easing, adjusting and refixing of any description exc 1 Sqm but n exc 2 Sqm each complete all as specifed and directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

S & F powder coated anodised sliding/hung type aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised luminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and complete as per direction of Engr-in-Charge.

S&F factory made solid panel PVC moulded door shutter With Particle With Wood Board Core, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & complete all as per direction of engr-in-charge.

S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.

S&F second class hard wood 30mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.

S & F 100mm size stainless steel hinges, medium weight complete all as specified and as directed by Engr-in-charge.

S & F 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.

S & F door handle, 125mm size, stainless steel, complete all as specified and as directed by Engr-in-charge.

S & F 300mm long stainless steel, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge.

S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

M&L Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer.

S & F in repairs 100mm size stainless steel hinges, medium weight complete all as specified and as directed by Engr-in-charge.

S & F in repairs 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and as directed by Engr-in-charge.

S & F in repairs door handle, 125mm size, stainless steel, complete all as specified and as directed by Engr-in-charge.

S & F in repairs 300mm long stainless steel, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge.

S & F in repair 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Hacking out old broken glass any thickness size quality or description including punching or drilling out old glazing fixing sping /clips all as specified and as directed by Engr-in-charge.

S & F 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

S & F 4mm thick figured glass, pin head type and glazing, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Taking down and Refixing wooden shutters of any description exc 1 sqm each but n.exc 2 sqm including re-securing or easing and adjusting in same opening complete all as specified and as directed by Engr-in-charge.

S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

Material and labour for repairs 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed in pelmet box with nails to timber frame work complete all as specified and as directed by Engr-in-charge.

All as per item No.31 here-in-before but 18/19mm thick board

Material and labour for 6mm thick teak wood lipping to 18/19mm thick particle board fixed with nails complete including varnish finishing etc., complete all as specified and as directed by Engr-in-charge.

All as per item No.33 here-in-before but for 12mm thick board.

S & F in repairs continous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 30mm complete all as specified and as directed by Engr-in-charge.

S & F in repairs locks, cupboard, grade I, size 50 mm with 2 levers complete all as specified and as directed by Engr-in-charge.

S & F in repairs 75mm size hasp and staple, mild steel, wire type, stone enamelled black including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engr-in-charge.

S & F in repairs 40mm dia cub board knobs fixed with nut screw and washer of Brass polished complete all as specified and as directed by Engr-in-charge.

Taking up or down 15mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge.

Taking up or down 20mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge.

Taking up or down 25mm bore steel water tubing and connections including removal complete all as specified and as directed by Engr-in-charge.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including clamping to walls complete all as specified.

S&F 15mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S&F 20mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

S&F 25mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

Dismantling PVC water tank of capacity n. exc 250 and removing complete all as specified and as directed by Engr-in-charge.

Dismantling PVC water tank of capacity exc 250 Ltrs and n.exc 500 ltrs and removing complete all as specified and as directed by Engr-in-charge.

Dismantling PVC water tank of capacity exc 500 and n.exc 1000 ltrs and removing complete all as specified and as directed by Engr-in-charge.

S & F 225 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I

S & F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I

S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I.

S & F for 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed (Minimum weight 455 gms) complete all as specified and as directed by Engr-in-charge.

S & F in repairs 15mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed (Minimum weight-142 gms) complete all as specified and as directed by Engr-in-charge.

S & F in repairs 20mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed (Minimum weight-210 gms) complete all as specified and as directed by Engr-in-charge.

S & F in repairs 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete (Minimum weight-455 gms) all as specified and as directed by Engr-in-charge.

S & F in repairs flexible PVC waste pipe 32/40mm suitable for wash hand basin and Kitchen Sink all as specified and as directed.

S & F in repairs PVC connection 15mm size PTMT nuts length 450mm complete all as specified and as directed by Engr-in-charge.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and as directed by Engr-in-charge.

S & F in repairs chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed by Engr-in-charge.

S & F in repairs 15mm Stop valves / Angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed by Engr-in-charge.

S & F in repairs 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repairs 15mm bore Bib tap of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) complete all as specified and as directed by Engr-in-charge.

S&F in repairs15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms) complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15mm bore Stop valve with long shank and cup (concealed type) of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms) complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15mm bore angle stopcock PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed by Engr-in-charge.

S&F in repairs 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms) complete all as specified and as directed by Engr-in-charge.

S & F in repairs 32mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc., with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-charge.

S & F in repairs 125 mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge.

S & F in repairs 19mm dia curtain rails, anodised aluminium alloy with fixing brackets, stops rollers etc., complete all as specified and as directed by Engr-in-charge.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia D type, 60 cm long between flanges complete all as specified and as directed by Engr-in-charge.

S & F Stainless steel Plate rack of size 780mm x 910 x 250mm (31"x36"x10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI-304 and fixed in repairs complete all as per Cat No P-348 of Prayag or equivalent all as specified and as directed.

S & F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.

S&F in repair water closet white Vitreous China, semi-pedestal pattern (Anglo-Indian Type) with integral foot rest ‘P’ or ‘S’ trap 100 mm bore front or back inlet incl provision of PCC bedding type B1, 1:2:4, seat cover( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern and flushing pipe 32 mm dia MS chromium plated) complete all as specified and as directed by Engr-in-charge.

S & F in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed by Engr-in-charge.

S & F in repairs plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs PVC connection 600mm long with two PTMT nuts complete all as specified and as directed.

Supply and fix in repair of flush pipe of polythene of low or high density or PVC 32mm for low level cistern complete all as specified and as directed.

Supply and fix for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc., of 110mm dia complete all as specified and as directed.

All as per item No.81 here-in-before but 75mm bore.

Supply and fix for PVC (SWR) bends/ shoes with Access door any radius of 110mm dia complete all as specified and as directed.

All as per item No.83 above but 75mm bore.

Supply and fix for PVC (SWR) (Single T) any radius provided with access door of 110mm dia complete all as specified and as directed.

All as per item No. 85 above but 75mm bore.

Supply and fix for PVC (SWR) branch pieces, single Y (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110mm dia with access door complete all as specified and as directed.

All as per item No.87 above but 75mm bore.

Supply and fix for PVC (SWR) branch pieces, double Y (equal or un equal), ordinary or inverted (spigot or socket type) or with parralled branches of 110mm dia with access door complete all as specified and as directed.

All as per item No. 89 above but 75mm bore.

Supply and fix for PVC (SWR) vent cowl complete all as specified and as directed.

All as per item No. 91 above but 75mm bore.

Repairs to steel windows /doors by using welding machine where necessary thicknesss of each welding spot exc 6mm but not exc 9mm complete all as specified and as directed.

S&F in repair for syphonic action rod (complete kit) with float valve for low level cistern and make serviceable in all respect complete all as specified and directed by Engr in Charge

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor complete all as specified

Removing building materials etc. to a distance of 1.5Km, beyond the lead included in the rates, including loading, unloading and stacking at the destination

M&L for applying high performance two component flexible acrylic Polymer cementitious waterproofing coating by two coats using 2kg/sqm in two coats having elongation of 150% after cleaning of surface and treating all surface cracks filled with cementitious non shrink grout at all surface patchwork defects with high early strength high performance rapid setting concrete, sealing bore packing joint with cementitious non shrink Grout all complete as per manufacturers specifications.

M&L for applying approved Epoxy resins coating/ Polymer modified cementious mortar complete all as specified and as directed.

M&L PCC 1:5:10 type ,E2 (using 40 mm graded stone aggregate) as in sunken floor filling complete all as specified and as directed

S&F 32mm Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 pipe laid in sunken floors as spouts.

M&L backing coat of mortar 15 mm thick for laying floor finishes with cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor wire drawn into existing concealed conduit including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following point wiring :- Make of cable : Plaza/Polycab/Finolex/ Havells

One light/ fan/ exhaust fan/ 3 pin socket independent board/ buzzer point controlled by one switch.

One 3 pin socket outlet 5 Amps,same board with cables 1.5 Sqmm size.

One light point controlled by two 2- way switches, with cable 1.5 Sqmm size.

All as per item ser no-2 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size.Make :- Polycab/Finolex/Plaza/Havells

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC casing & caping/fixed on wall/roof/ceiling etc of size not less than 20 mm dia including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- Make for PVC casing & caping: SUDHAKAR / AVON PLAST /PLAZA , Make for Copper cable: Finolex/Polycab / Plaza.

One light point controlled by one switch.

One 3 pin socket outlet 5 Amps, indipendent board with cables 1.5 Sqmm size.

All as per item ser No-109 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size. Make :- Polycab/Finolex/Plaza

M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size as specified for the following sizes. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Rates are including taking down old unserviceable. Make for Copper cables: Finolex/Polycab / Plaza/ Havells. Make of PVC Conduit: SUDHAKAR/FINOLEX/AVON PLAST.

2x 4.0 sqmm and 1x 4.0 sqmm as earth wire

2x 6.0 sqmm and 1x 6.0 sqmm as earth wire

S&F in repair for switch piano, flush type single pole , one way 5 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for bell push flush type, 5 Amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for switch piano, flush type single pole , two way 5 amp complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S&F in repair for Lamp holder angular/batten type, PVC/ polycarbonate type with back plate complete all as specified and as directed by Engr-in-Charge Make: Anchor/Cona/Leader

S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc and including taking down old all as specified and as directed by Engr-in-Charge . Make: Anchor/Cona/Leader/Lisha.

Taking down existing rusted switch board sunken box from site including removing fixtures and fittings such as switch, socket fan regulator complete, removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces necessary plaster, white wash matches with existing colour of wall, floors, etc. all as specified and as directed.

Supply and fixing in repair of GI metal flush box suitable for mounting moduler plate of following modules:-

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

12 Module

Supply and fixing in repair of combined both frame and cover plates fixing on mounting boxes for following modules:-

Cover plate with frame 1 Module

Cover plate with frame,2 Module

Cover plate with frame,3 Module

Cover plate with frame,4 Module

Cover plate with frame,6 Module

Cover plate with frame,8 Module

Cover plate with frame,12 Module

Supply and fixing in repair of modular switch one way 5/6 A white Active one module all as specified and as directed by the Engineer-in-Charge

Supply and fixing in repair of modular switch socket combination 16 A, 6 pin 3 module flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge .Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular switch socket combination 5 Amp, 5 pin flush type Active white two module complete all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair of modular fan step regulator,120 W-2 module all as specified and as directed by the Engineer-in-Charge.Make: Havells(Crabtree)/Legrand/Plaza.

Supply and fixing in repair modular bell push 6 A one module complete all as specified and as directed.

Supply and fix Eco compact wall mounted LED batten for T8 LED tube CAT CROMPTON DIJB12LT8-20 with ULTRON high efficency LED polycarbonate tube with in built driver and metal heat sink 18 watt icluding taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge.Make : Crompton LT8-20-865(2) /philips/wipro/Havells.

Supply and fix high efficiency wall mounted LED batten type polycarbonate tube not less than10W 2 ft LED and including taking down old unserviceable fittings all as specified and as directed by Engr-in-Charge . Make : Havells LHEXACP7IN1W010 or equivalent model of Philips/Crompton/wipro/ Surya.

Supply and fix Energy saving not less than 25 Watts LED light fitting ,IP66 powder coated pressure die cast aluminium high power street light with heatresisant toughened glass with lens by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length with suitable size MS Clamp two nos made out of 25x3 mm FI incl two coat of synthetic enamel paint over a coat of red oxide primer, prewired and including connecting up with 3 core flexible copper conductor cable of 1.5 Sqmm from ceiling rose to fitting and including taking down old u/s damaged all as specified. Make Surya/Havells/Philips/CROMPTON.

S&F sheet metal enclosure vertical TPN MCCB DB 4 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB's (ii) MCCB and MCBs shall be measured and paid separetly under the respective item of shedule. Make: Legrand/ Siemens/Scheneider/ABB.

S&F sheet metal enclosure vertical TPN MCCB DB 8 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB's (ii) MCCBs and MCBs shall be measured and paid separetly under the respective item of shedule. Make : Legrand/ Siemens/Scheneider/ABB.

S&F sheet metal enclosure vertical TPN MCCB DB 12 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB's (ii) MCCB and MCBs shall be measured and paid separetly under the respective item of shedule.Make: Legrand/ Siemens/Scheneider/ABB.

S&F sheet metal enclosure Horizontal TPN DB 8 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCB's (ii) MCBs shall be measured and paid separetly under the respective item of shedule. Make : Legrand/ Siemens/Scheneider/ABB.

S&F MCB,DB SPN 12 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.

S&F MCB,DB SPN 08 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule. Make: Legrand/ Siemens/Scheneider/ABB.

S&F MCB,DB SPN 04 way double door DB with 200 amps rated copper bus bar in SS enclosure double door type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.

S&F MCB,DB SPN 02 way in SS enclosure type. Note : MCB SPN/SP shall be measured and paid under the respective item of the schedule.Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & fixed Magnetic setting type 250 Amps with breaking capacity 36 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB.Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Fixed Magnetic setting type type 200 Amps with breaking capacity 36 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB,Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, Fixed thermal & Fixed Magnetic setting type type 150/160 Amps with breaking capacity 25 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB, Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V, Fixed Thermal & Fixed Magnetic setting type type 125 Amps with breaking capacity 16 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCCB 4 Pole, 415 V,adjustable Thermal & Fixed Magnetic setting type type 100 Amps with breaking capacity 16 KA complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB TP 415 V, 25-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix in repair for MCB TPN 415 V, 40-100 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB SPN 230 V, 40-63 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-charge.Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed by Engr-in-chargeMake: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

S& F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one SP MCB 20-32 Amps. Make: Legrand/ Siemens/Scheneider/ABB

Material and labour for Earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level , with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected with and incl GI earth wire 4mm dia including alternate 5 layers of charcoal, salt crystal and including 15 mm dia GI pipe light grade by means of nuts, bolts, washers and necessary earth work upto 7.5 mtr and connecting to test point, LT Switchgear etc as per site requirement including necessary excavation, earth work in any type of soil, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in elecrical plate No 3 of SSR Pt- I including testing on completion complete all as specified and as directed. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement, removal of surplus soil , site clearance etc.

M&L for GI Pipe 15 mm light grade galvanised, with all fitting laid in trenches all as specified and directed

M&L for cutting chases on brick walls concrete surfaces not exc 10cm girth and making good in cement mortar (1:3) the existing surface after carryiing out the concealed wiring including necessary finishes all as directed by Engr in charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC cool white (or) warm white colour, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fix ceiling fan 230 V, 1200mm smart saver-50 of Orient or equivalent of Crompton/Bajaj/Usha

Supply and fix Exhaust fan 300 mm Sweep, 230 volts,50Hz of Orient or equivalent of Crompton/Bajaj/Usha

S&F for Rigid PVC junction box three way 25 mm surface mounted four hole type for 5 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge

S&F for Rigid PVC junction box three way 32mm surface mounted four hole type for 15 Amp independent board complete with screw not and bolt all as specified and as directed by Engr-in-Charge

Supply and fix for round/ square recessed mounted LED panel luminire not less than 18 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LCDEP-18-CDL / LSDEP-18-CDL .

Supply and fix for round/ square recessed mounted LED panel luminire not less than 15 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LSDEP-15-CDL / LCDEP-15-CDL .

Supply and fix for round/ square recessed mounted LED panel luminire not less than 9 watts with panel and suitable for false ceilling complete all as directed by Engr-in-Charge Note:- Including taking down the existing unserviceable FTL fittings. Make: Philips/ Crompton Cat pt LCDEP-09-CDL / LSDEP-09-CDL .

Supply and fix BEE Rated LED Lamps 9W - B22 / E27 Crompton/Bajaj/Usha

Supply and fix for Buzzer, Ding Dong AC, 230 volts, single pole. Make: Anchor, GM,

Green Ray Technologies

SREE BALAJI ENTERPRISES

VKR ENTERPRISES

RD ENTERPRISES