GE 861 EWS-55/2023-24

Amount

Material and labour for demolition of cement concrete (unreinforced in ground floors & pavings n.exc 15 cm thick (below or above ground level) complete all as specified and directed by Engr in charge .

Material and labour for taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engr in charge .

Material and labour for dismantling timber scantling 40 sqcm and over in section in any position in framed work complete all as specified and directed by Engr in charge .

Material and labour for dismantling wall and ceiling boards with snap grid (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr in charge .

Material and labour for taking down chowkhat or frames not exc 1.5 sqm each(w/o taking of shutters from the frame ) complete all as specified and directed by Engr in charge .

Material and labour for taking down chowkhat or frames with shutters exc 1.5 sqm but n exc 4 sqm each (w/o taking of shutters from the frame) complete all as specified and directed by Engr in charge .

Material and labour for dismantling plain or corrugated steel sheeting, any gauge, thickness of roof covering complete all as specified and directed by Engr in charge .

Material and labour for demolition of brick or stone masonry built in cement mortar including all necessary arches quoins etc complete all as specified and directed by Engr in charge .

Material and labour for dismantling floor hearth or wall tiling including cement mortar bedding (but not balking) removing serviceable tiles to store complete all as specified and directed by Engr in charge .

Material and labour for brick work with sub class ‘B’ brick straight or curved on plan exceeding 6m mean radius in CM 1:4 complete all as specified and directed by Engr in charge .

Supply and fixing 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges, lock strike plate, etc, complete all as specified and directed by Engr in charge .

Supply and fixing 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and directed by Engr in charge .

Supply and fixing 2nd class hard wood 35 mm thick panelled shutters (any number of panels ) with panels of timber flat on both sides (feather edged) of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed by Engr in charge .

Supply and fixed 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) (kail) complete all as specified and directed by Engr in charge .

Supply and fixed 30 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(b) (kail) complete all as specified and directed by Engr in charge .

Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed by Engr in charge .

Aluminium anodised barrel tower bolts extruded section of size 150mm, complete all as specified and directed by Engr in charge .

Aluminium anodised barrel tower bolts extruded section of size 100mm, complete all as specified and directed by Engr in charge .

Supply and fixing aluminium handle extruded febricate type anodised of size 150 mm complete all as specified and directed by Engr in charge .

Supply and fixing aluminium handle extruded febricate type anodised of size 100 mm complete all as specified and directed by Engr in charge .

Material and labour for 25 mm thick PCC 1:3:6, type C-2 and in sub base using 20 mm graded aggregate crushed stone complete all as specified and directed by Engr in charge .

Material and labour for kota stone slab flooring 20-25 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engr in charge .

All as per Srl item No 22 above herewith-in-before but on vertical surfaces of walls /skirting/dado etc complete all as spd over 10mm rendring in CM 1:4 complete all as specified and directed by Engr in charge .

Material and labour for pre-painted galvatume aluminium zinc coating Gi based corrugated steel sheet 0.5mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in charge .

Material and labour for pre-painted galvatume aluminium zinc coating Gi based plain steel sheet 0.5mm thik of an colour having tensile strenght of 550 Mpa as in roof ridge etc fixed with self tapping screws complete all as specified and directed by Engr in charge .

Material and labour for rendering 15mm thick on other than fair faces of brick or stone masonry surfaces of walls in Cement mortar 1:4 finished even & smooth without using extra cement complete all as specified and directed by Engr in charge .

Material and labour for rendering 10 mm thick in cement mortar 1:6 finishing on other than fare brick or concrete surfaces finished even & smooth without using extra cement

Material and labour for preparation by applying 3 mm thick wall care putty on new plastered wall surfaces including rubbing the same to get finished smoothen surface and applying two coat of oil bound distemper over one coat primer, preparatory to distempering complete all as specified and directed by Engr in charge .

Material and labour for preparation of old surfaces of walls by complete removal of existing treatment and and applying two coat of oil bond distemper over a coat of primer with 3 mm wall care putty including rubbing the same to get finished smoothen surface finish completd all as specified and as directed.

Material and labour for preparation of old surfaces of walls by complete removal of existing treatment applying two coats of cement based paint paint over a coat of alkali resistant priming paint complete all as specified and directed by Engr in charge .

Material and labour for applying two coats of cement based paint paint over a coat of primer including prepared new plastered surfaces of wall complete all as specified and directed by Engr in charge .

Material and labour for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including preparation of surfaces over 10cm width or girth complete all as specified and directed by Engr in charge .

All as per Srl item no 32 above item here in before but one coat on old surface without primer complete all as specified and directed by Engr in charge .

Supply and fixing for anodised aluminium snap grid of size 605 x605 mm frame work for false ceiling including straining with GI wire4 mm thick complete all as specified and directed by Engr in charge .

Supply and fixing for 10 mm thick PVC insulation panels with EPS stuck to 1 mm thick plain PVC sheet suitably placed in false celing grid made of aluminim & GI/MS as per specification and drawing complete all as specified and directed by Engr in charge .

Supply and fixing for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples all as specified & directed.

Material and labour for cement concrete type C-1, 1:3:6 (20mm gradeded aggregate), 75mm thick as in plinth protections finishing even and smooth without using extra cement complete all as specified and directed by Engr in charge .

Material and labour for for two coats of synthetic enamel paint on new steel surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth complete all as specified and directed by Engr in charge .

Supply and fixing Fe-410-W ,B quality roof truss (framed) ,trussed,purlins, crane gantries,rails and fastning and heavy bracket framing (Beam, tee, angle,channel or flat section) including distance pieces, cleats etc.complete all as specified and directed by Engr in charge .

Material and labour for chequerd cement concrete tiles glossy finished 20cm x20cmx25mm th with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over 15 mm thick screeed bed in CM 1:6 complete all as specified and directed by Engr in charge .

Material and labour for 100 mm thick PCC 1:4:8, type D-2 and in sub base using 40 mm graded aggregate crushed stone complete all as specified and directed by Engr in charge .

Material and labour for excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts well cesspits manholes pier holed etc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard and dense soil complete all as specified and directed by Engr in charge .

Material and labour for post holes each n.exc 0.5 cum and returning filling in and ramming earth or broken rubble mixed with earth around , in layers not exc 25 cmin hard and dense soil complete all as specified and directed by Engr in charge .

Material and labour for PCC 1:4:8 type D2 using 40 mm graded aggregate in Foundation filling and mass concrete / Bed concrete complete all as specified and directed by Engr in charge .

Material and labour for 75 mm thick PCC (1:4:8) type D2 (using 40 mm graded aggregate ) as in sub for receiving floor finishes etc. complete all as specified and directed by Engr in charge ..

Material and labour for cement concrete type C2 1:3:6 (40mm graded stone aggregate) for fixing of post holes complete all as specified and directed by Engr in charge .

Supply and fix MS plates/flat angle etc as in cleat gusset plate incl drilling welding etc complete all as specified and directed by Engr in charge .

Supply and fixing 2mm thick fiber glass translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall complete all as specified and directed by Engr in charge .

Material and labour for 2nd class hard wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engr in charge .

Supply and fixing 200mm long of barrel tower bolts stove enammeled black with bright bolt complete all as specified and directed by Engr in charge

Supply and fixing 150mm long of barrel tower bolts stove enammeled black with bright bolt complete all as specified and directed by Engr in charge .

Supply and fixing 150mm mild steel pressed handles oval type stove enamelled black complete all as specified and directed by Engr in charge ..

Supply and fixing100mm mild steel pressed handles oval type stove enamelled black complete all as specified and directed by Engr in charge ..

Supply and fixed butt hinges 100 mm medium weight cold rolled mild steel complete all as specified and directed by Engr in charge .

Supply and fixed butt hinges 75 mm medium weight cold rolled mild steel complete all as specified and directed by Engr in charge .

Supply and fixing MS helical door spring including roller & roller plate complete 300 mm size complete all as specified and directed by Engr in charge .

Supply and fixing 150 mm long floor door stopper of aluminium alloy body and tongue, anodished with hard drawn steel spring complete all as specified and directed by Engr in charge .

Supply and fixing galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aparture 1.18 mm complete all as specified and directed by Engr in charge .

Material and labour for returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed by Engr in charge .

Material and labour for preparing new plastered surface of wall and applying three coats of white wash on walls etc complete all as specified and directed by Engr in charge .

Material and labour for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and directed by Engr in charge .

Material and labour for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr in charge .

Material and labour for hardcore of guage exc 63mm but n.exc 100 mm, broken bricks deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr in charge .

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade - With Grey Cement and pigment complete all as specified and directed by Engr in charge .

Material and labour fo sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr in charge .

Material and labour for PCC 1:2:4 type B1 (20 mm graded aggregate) as in coping etc complete all as specified and directed by Engr in charge .

Material and labour for excavating over areas, n exc1.5 m deep and getting out in soft /Loose soil complete all as specified and directed by Engr in charge .

Material and labour for excavating over areas, exc1.5 m deep but n exc 3.0m deep and getting out in soft /Loose soil complete all as specified and directed by Engr in charge .

Material and labour for RCC M-25( Design Mix) concrete (using 20mm graded aggregatet) as in shelves /slabs supported on walls, beam and columns,in floors ,roof, landings ,balconies, slabs in helves and the like complete all as specified and directed by Engr in charge .

Material and labour for form work to soffits of suspended slabs such as roof slabs,/shelves floor slabs etc ,landing ans similar work, not exe 200mm thick (horizontal or sloping ) for fair finish surface complete all as specified and directed by Engr in charge .

Supply and fixing for mild steel bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr in charge .

Material and labour for old size Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed by Engr in charge .

Material and labour for for old size Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cm (1:4) complete all as specified and directed by Engr in charge .

M & L for PCC 1:4:8 type D2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for pipes of 150 mm bore complete all as specified and directed by Engr in charge .

M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed by Engr in charge .

M & L for Precast cement concrete 1:2:4 type B1 (Using 20mm graded granite stone aggregate ) in landings, cover slabs ( for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4. complete all as specified and directed by Engr in charge .

Material and labour for old size brickwork with fly ash bricks in one brick thick honey-comb walling, built in, built in cm 1:4 complete all as specified and directed by Engr in charge .

Material and labour for loose filling with broken bricks of gauge 80 to 150mm in soakage pits, soakage wells etc complete all as specified and directed by Engr in charge .

Material and labour for 75 mm thick, PCC 1:3:6 type C-2 as in plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engr in charge .

Material and labour for broken stone hard core of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed by Engr in charge ..

Material and labour for taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engr in charge.

Material and labour for point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in PVC casing & capping and including pipe hooks , elbows, junction covers and junction boxes , after fixing or cutting on wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes 60mm deep ,suitable length and thickness for mounting, switches, sockets, fan regulator with 3 mm thick plastic laminated sheet cover fixed with brass screwed and cup washers, duly fixed on wall or grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly,

All as per srl item No-82 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-82 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

Description all as per item No 82 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm.

M&L for point wiring complete for 15 amps indepencent/ combined board with cable 2.5Sqmm (Nominal area) FRLS PVC insulated multi stranded unsheated copper conductor drawn in PVC casing caping and including pipe hocks elbows junction covers and junction boxes after fixing or cutting on wall chessling for conduites and sinking for sunken cast iron/ pressed steel terminal boxes 60mm deep suitable length and thickness for mounting switches, sockets, fan regulator with 3mm thick plastic laminated sheet cover finished with brass screwed and cup washer duly fixed on wall or grouting and painted wth red oxide metal primer and making the good disturb surfaces of wall in CM 1:3 with white wash or existing colour including provision of continous earth continuity conductor alongwith point wiring of 1.5Sqmm copper PVC insulated cable for 15Amps socket outlet point controlled by one switch and connected to common earth dolly complete all as specified and directed by Engr in Charge.

M&L Sub main wiring with two single core PVC FRLS insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 sqmm as earth lead in & including PVC casing caping medium grade 2mm thickness ISI marked cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in-charge.

Supply and fixing switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engr in charge . by Engineer - in - Charge.

Supply and fixing for Switch Socket combination, 6 pin 5 and 15 Amps multi purpose 2 in 01 flush type, 230 volts complete all as specified and directed by Engr in charge .

Supply and fixing for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts complete all as specified and directed by Engr in charge .

Supply and fixing socket outlet 3 pin, 5 Amp, flush type all as specified

Supply and fixing fan regulator electronic type complete all as specified and directed by Engr in charge .

Supply and fixing ceiling rose surface bakelite three terminals complete all as specified and directed by Engr in charge . by Engineer - in - Charge.

Supply and fixing LED lights fitting 1x20W, 230V, AC decorative box type with drive, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr in charge .

Supply and fixing angle holder insulated body with back plate for conduit fitting complete all as and directed by Engr-in-Charge.

Supply only LED lamp 9 watt, 230 volts complete all as specified and directed by Engr in charge .

Supply and fixing LED lights fitting 1x10W, bulkhead luminiaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete ase of suitable size from ceiling rose complete and directed by Engr-in-charge.

Supply and fixing sheet metal enclosure MCB distribution board, double door with IP -43 protection single phase 240 volts 12 way,including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification.

Supply and fix in replacement MCB SPN, 240 volts any rating from 40-63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed by Engr in charge.

S&F MCB single pole 16 to 32 Amps B Curve 240 volts 10 KA finger prrof terminal, bi-connect termination, lable holder, 35 mm terminl capacity insulated sliding shutter, large to position dolly, ISI marked to be fixed on existing DB complete all as specified and directed by Engr in charge.

Material and labour for MCB single pole 240 volts 5 to 32 Amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), disconnect upper and lower terminals , integrated label holder to ensure circuit identification.

Removing the old unserviceable service cable taken as credit including supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galavanised steel wire or tape and over all PVC sheathed 4 Sqmm nominal cross section in service connection of 16 Sqmm 2 core ___

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick buried directly in ground less than 2.25mtr deep below normal ground level as earth electrode with top edge of the earth plate not less than 1.50mtr below ground level using GI strip 32x6 mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. Note:- (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall deem to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter. (iii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department .

Material & labour for taking down old/UNSV security light/street lights and Supply and fixing LED 30 Watt security light fitting new energy saving and enviromental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lense embedded PC cover having IP66 protection and impact resistence of IK08 with 10KV Built-in-surge protection device complete with all accessories etc including connecting with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in charge. Make : Havells Cat Part No - ENDURASUNODOWNSL30WLED 757PASYBOPC or equivalent Bajaj/ CG

Material & labour for taking down old/UNSV Flood lights and Supply and fixing LED Flood light 50 Watt energy saving and enviromental friendly, long life exclusive innovative die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or area lighting, also suitable to rough services/ installation complete with all accessories etc includign connecting with three core twisted flexible copper conductor cable with suitable size all as specified and directed. Make : Havells Cat Part No - JETAADORNFLS50WLED757SSYMTOTG or equivalent in Bajaj/ CG

Supply and fixing PVC insulated and Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt 3x 1.0 Sqmm drawn through pole from junction box to security light fitting complete all as specified and directed by Engr in charge

Supply and fixing refrigerators, electric driven (double door), electric driven double door electric driven (single phase 230 olts), capacity 310 Litres BEE 3 star invertor compressure complete alongwith all connected accessories complete all as specified and directed by Engr in charge .. Make : LLOYD Model: GLFF313ADST1PB or equalvent in whirpool /samsung.

Supply and fix Voltage stabilizer for automatic operation, single phase neutral air cooled indoor type & designed for input variation between 170 Volt to 250 Volt with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and of capacity 3 KVA complete all as specified and directed by Engr in charge.

M/S SHEIKH FEROOZ AHMAD

M/S Hilal Builders

SAMEER CONSTRUCTIONS

BHAT CONSTRUCTIONS AND BUILFERS

MS BHAT BROTHERS