Renovation of Lab and culture room in KS 118 and KS 121 in CRI Building at ACTREC

Amount

Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putty of average thickness of 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Material, Labour Charges) Etc. Only to be applied at distressed areas and newly plastered surface as per the instruction of Engineer incharge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content along with crack filling if required.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats.

Using synthetic enamel paint ( Oil Piant)

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work : 100 mm diameter pipes

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work100 mm diameter pipes

Removing of all the components from the existing metal table involves removing the under-table storage unit, metal drawer, shelves and all other attached storage components, while retaining the main metal frame as the core support structure. Once these elements are dismantled, the tabletop will be refitted securely onto the frame to ensure stability. All dismantled areas will be cleaned and finished properly, with sharp edges smoothened for safe usage. This modification will result in a simplified and sturdy table design, utilizing only the metal frame and tabletop, making it more suitable for flexible use and easier maintenance as directed by engineer in chargeas directed by EIC.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing & fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides & shelves & 8 mm commercial ply approved make for back side thick commercial ply and outer surfaces and top of shelves for open type cabinet should be laminated with 1.5 mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges,, SS handle 4”, knosbs, approved by Engineer-In-Charge etc. and all exposed edges lipping with 6mm Thick T.W. lipping patti etc. all complete as specified & directed by Engineer-In-Charge.

Providing & fixing approved quality machine pressed phenol formaldehyde bonded commercial/marine plywood of approved size and fixing the same with necessary nails/screws/adhesive in partition cupboard shelves/ktichen cabinets/flush doors etc. at all floors and locations in quantities as required at site in following thickness including 6 mm thick T.W.lipping patti at all exposed edges with nails/screws/hardwares/adhesive wastage in cutting , transportation etc. complete all as directed by the Engineer-In-Charge. 19mm thick ply

Providing and fixing granite of 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

Providing making & supplying computer table made out fo 19mm commercial ply for table top, mounted on the vertical side fo 19mm commercial ply and cabinet made out of 19mm commercial ply for sides. All exposed faces should be 1.5mm thk laminate of approved colour and non laminated area should be french polished inclu. cost of other materials labor etc. as per drawing and as specified and directed by Engineer-In-Charge.

Providing & making of fully drawer storage unit made up of 19mm thk. Commercial plywood with heavy duty sliding channel & with 6mm thick commercial plywood for back . 19mm plywood for top, bottom, front of shelves. Side of the drawer to be of 12mm thick & bottom to be as per the requirement. 1mm thick approved laminate to be fixed on exposed surfaces of unit. All faces to be laminated. Including items such as lock, hinges, tower bolt, handle to be of heavy duty & approved make only.

Providing & fixing Roller blinds (Premium quality) of approved make with heavy duty roller brackets & necessary fixtures. Warranty for roller mechanism & others accessaries shall be for One year from date of installation. [AS PER SAMPLE AVAILABLE AT SITE] [Payment will be made on actual Mesurement basis. Windows mesurement to be taken before installation of roller blinds for achieving one piece work. ]

Core Cutting for holes upto 100 mm in size clean with cleaning of debris and carting it away from ACTREC premises or dumping as per the instructions of engineer- in charge. Cleaning of dust caused due to core cutting is also in the scope of contractor.

Removing the existing PVC flooring alongwith handing over servicable material and disposal of waste as per instruction of Engineer in charge.

Providing & laying new 2mm thck PVC flooring tiles.

Providing and fixing sun control films 1.5 mil thick garware film on window glasess without damaging rubber gaskets, handle , friction hinged etc complete including neccesary scafolding job is to be complited as per garware film specification and as directed by EIC.

Providing & fixing glass panels of approved make with teak wood bedding for window shutter (6mm thick) as directed by EIC.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Labour charges only for removing existing metal/ damaged / cracked / loosened cement / neeru /rough casts and faced plaster or tile work with back coat at all floors and levels including leaning the surfaces clear of all loose concrete/mortar foreign materials, carting away the debris out of hospital premises including scaffolding raking concrete surfaces etc. complete with quantities to be executed as and when required and as directed by the Engineer- In-Charge.

Providing and laying water proof cement plaster 20mm in two coat backing coat of 12mm thick in CM 1:3 and second coat 8mm thick in CM 1:3 finish including supplying and adding water proofing compound weight of cement at all floor levels for repair to chambers, manholes, water retaining structures, depressions in bath/WCS etc. in quantities as required at site including scaffolding, curing layer will be allowed to air cure for 4hours followed with water curing for 48 hours, hacking of concrete surface etc. complete all as directed by engineer-incharge (to maintain bone dry condition underneath for 10 yrs) The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipe sand masonry with polymer mixed slurry. (Rates also includes disposing/taking away the debris outside the premises of ACTREC and disposing as per the statutory guidelines).

Removing of existing platform with sink and pedestal top cudupah or any other stone etc. carefully shifting the materials to the place as per instructions removing debris from the premises cleaning the area making the surfaces good with CM to match the existing surface curing etc. Complete all as specified.

Providing and fixing in position Stainless Steel sink with drain board or without drain board of Nirali make only resting over bracket with waste coupling including fabricating bracket from 'B' class GI pipe with necessary welding, chiselling in wall and fixing the sink in position with waste coupling, bottle trap all complete as per the specified and directed by engineer-in charge. 2000mm x 510mm big x 200mm

Providing & fixing approved make heavy quality C.P. brass screw down pillar tap with jam nut easy clean variety of 15 mm n.b. etc. complete all as directed by the Engineer-In-Charge (work includes removing old fittings and fixtures and handing over the same)Long Nose : Not LESS THAN 810 Gms

S.S. waste coupling of required size of S.S. sink of Nirali make.

75mm pvc pipe

Providing & fixing 1.5mm thick approved laminate of required colour over existing surfaces along with the adhesive all as required specification design etc. complete as specified and directed by Engineer-In-Charge. 1.5 mm thick

Providing and fixing in position shelf of required size made of 19mm thick ply of approved make with T.W.lipping patti of 6mm thick of required size to all exposed surface with 1.5mm approved laminated on top of the shelf mounting over the bracket made out of 40mm x 40mm T.W section bracket with french polish to all Nosn laminated surface with bracket.Etc.complete all specified and directed by Engineer-in-Charge.

Labour charge only for removing & re-fixing available door/ shutter of wooden overhead storage cabinet shutter with necessary modification including cutting the existing shutter providing leeping patti all around the shutter if required including removing & refixing availbale old hinges, mortice lock, tower bolts ect. fixing aligning the door shutter in proper plumb and level etc. complete all as per specified and directed by Engineer-In-Charge

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width.

SITC of Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

SITC of Secondary light point from first light point to second light point connected in the same switch ie looping point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable etc. as required.

SITC of Wiring for circuit/sub main using 2.5 sqmm, PVC insulated, FRLS, stranded, flexible copper conductor wires.

SITC of Wiring for circuit/sub main using 4 sqmm, PVC insulated, FRLS, stranded, flexible copper conductor wires.

Supply, fixing, Testing & commissioning of 32A DP MCB with enclosure & connected with provided leads on incoming & outgoing side with all fixing arrangements etc, duly completed in approved manner, all as per instruction and as directed by EIC.

Supply and fixing of 18W surface-mounted LED lighting fixture

Supplying and fixing the following size/ modules, PVC box for modular switches in surface / concealed, etc. as required. Including finishing of the same for concealed fixing with cement, and final painting as per actual.

1 or 2 Module

6 Module

Supplying and fixing the following size/ modules, modular base & cover plate for modular switches in surface / concealed, etc. as required. Including finishing of the same for concealed fixing with cement, and final painting as per actual.

1 or 2 Module

6 Module

Supply and fix the following modular switch/ socket on the existing modular plate & switch box, including connections but excluding modular plate, etc., as required.

Modular switch 6A/16A

Modular Socket 6A/16A

Modular ceiling fan regulator (2 module)

Supply and fixing of 2 feet led light fitting

Providing, fixing & commissioning of ceiling fan 1200 mm sweep White colour as per requirement, including down rod, double ball bearing, etc, all as per instructions and as directed by E-I-C.

SITC of Cat 6 type I/O with RJ 45/11 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS

Supply & laying of CAT-6 cable through provided casing-capping, PVC conduit, all as directed by EIC.

Supply & Fixing of 25 mm size PVC rigid conduit with spacers & saddles screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc. Compete as per instruction of EIC.

Supply & Fixing of 1.25 inch casing capping with spacers & saddles screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc. Compete as per instruction of EIC.

Dismantling/removing the existing light, fan, bell, independent plug point, wiring of all types with accessories, Switch boards, etc.

Dismantling the existing mains wires of all sizes, make running through PVC casing capping/pipes/MS conduits including casing capping/PVC pipes/ MS pipes/GI pipes/ HGDWC pipes/PVC or Metal trunking etc.

SITC of Biometric fingerprint based time and attendance + door access control system with RFID technology, power supply adaptor, and the following Special Feature: INOUT attendance records, Push Data Technology Users: 3000 Fingerprints Card Capacity: 3,000 Transactions: 1,00,000 Communication: RS485, TCP/IP, USB, as per instructions & as directed by O-I-C, ES.

SITC of emergency exit switch Push button type ( installed inside door)

SITC of double door or single door electromagnetic lock

ZL bracket used for Electromagnetic lock support

Installation, commissioning charges for machine and software including all internal wirings , casing cappings , all accessories from machine to electromagnit lock , and inside switch., minor civil work required complete in all respect.

Supply of Access proximity cards

Decorative Chilled water Hi Wall Units

2.0 TR (600CFM) Decorative Hi wall unit

SITC of Copper Pipe 5/8'' with Insulation sleeve (in pair) with GC cloth as per suitable size and capacity

SITC of Flexible Copper Cable 3C x 1.5 sqmm

SITC of Drain UPVC Pipe 25mm with fittings with class O Insulation

SITC OF Cassing Pathi 3'' to 5 " lenth for laying of copper pipe & cable .

Dismatling & Reinstalation chilled water Hiwall unit including piping, , indoor cabling , drain, cable, etc as per instruction and as directed by OIC-ES

Core cutting .

Dismantling and re-routing of existing LPG line of ½″ NB (15 mm) GI pipe, Medium Class (Class B), including necessary fittings, supports, and making good the disturbed surfaces complete as directed by OIC-ES

SITC of ½" Brass needle valve table top LPG grade, ISI-marked

SITC of flexible sureksha hoose pipe (max length 1.2–1.5 mtr )

SITC of 25 NB MS pipe MAKE- JINDAL, Support, clamping, Panting ,Sinages,testing incusive ect

SITC of 25NB Brass needle valve table top LPG grade, ISI-marked

aswani infrastructure (BID ID -3327333)

arcoma (BID ID -3327245)

Naysha Enterprsie (BID ID -3327017)