GE/BAS-48/2025-26 Certain repair to OTM and Md Accn in Pocket B and repair to roof treatment, joinery, plumbing work and misc work in MAP Accn at Basoli Grn under GE Basoli

Amount

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc 1.5 Sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed

Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm complete all as specified and directed.

Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm PVC Ultra Violet chemical, glossymate finish 100% termite/water proof, fire retrandent eco friendly, PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing

S&F factory made solid panel PVC Mounlded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail: Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

Demolition of Wall/ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S & F hollow PVC 5mm thick Wall Lining any colour/texture sheet incl all fixing arrrengement as complete all as specified and directed.

S&F For Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with sash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a) complete all as specified and directed.

S&F For Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered particle board with commercial veneering on both faces, the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated complete all as specified and directed.

S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30mm thick complete all as specified and directed.

S&F in repair 18-20mm thick prelaminated high density PVC board having weight 8 kg /sqm ,100% termite/ fire retrandent eco friendly soild board one side decorative choice laminate and other side balancing white as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc excluding Cupboard hinges , Alu handle, towerbolt, hasp and staple, piano hinges, Magnet and channel where required size as per dirn of Engr in Charge including taking down of old cupboard of any type complete all as specified and directed.

S&F in repair 5mm thick prelaminated high density PVC board having weight 2 kg /sqm ,100% termite/fire retrandent eco friendly soild board one side decorative choice laminate and other side balancing white for wall linning where required size as per dirn of Engr in Charge including taking down of old wall linning of any type complete all as specified and directed.

M&L for preparation of treated/un-treated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preperation of old wooden surface and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm complete all as specified and directed

M&L 1.25mm thick pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm complete all as specified and directed.

M&L For PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling of chowkats complete all as specified and directed.

S & F in repair for Continuous (piano) hinges (40mm flap), mild steel, bright finish or eletrogalvanised complete all as specified and directed.

S&F in repair/new Magnetic catcher 50mm for cupboard complete all as specified and directed.

M&L in repair for crank hinges for kitchen cupboard/ almiraha any size any type for md offrs accn complete all as specified and as per sample kept in GE office. Make:-Hettich,Godrej Harrison or equivalent

S&F For MS 300mm ordinary rat tail rod pattern springs including roller and roller plate.complete all as specified and directed.

S&F Mild steel Butt hinges medium weight cold rolled size 100mm complete all as specified and directed.

S&F in repair aluminium handle, cast type, anodised ,150 mm size complete all as specified and directed.

S&F in repair aluminium anodised barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

S & F floor stopper 150mm length of aluminium alloy body and tongue, anodised, wth hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Stainless steel barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

S&F Stainless steel handle of size 150 mm long complete all as specified and directed.

S&F 100 mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screw,complete all as specified and directed

S&F aluminium alloy , anodised ,sliding door bolt with hasp and size 250mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed.

S&F in repair aluminium alloy , anodised ,sliding door bolt with hasp and size 250mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and directed.

S & F in repair Door closer of aluminium (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete all as specified and directed.

S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter,and including shutter for wire mess and Glass (glass panes and wire mesh shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills and two coat of synthetic enamel paint over a coat of red oxide primer including taking down of old windows of any type complete all as specified

S&F Sheet glass, ordinary quality 3mm thick and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair 3.00 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

S&F in repair Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

M&L Painting to old steel surfaces including prepration applying one coat of synthetic enamel paint complete all as specified and directed.

S&F Aluminium anodised frame for door and windows, ventilator with one or more rebate including jointing cleat complete all as specified and directed.

Supply & fixing Windows/ ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqm.) with total coated thickness of 0.60mm including painting, with Frame section 72mm x 55mm, Mullion section 72mm x 50mm, Shutter Frame 47mm x 20mm, including 5mm plain/figured float glass and wire mesh,handle, lock and other accessories with powder coated guard bars Grill of size 10mm sq. MS Bars and 6mm x 12mm MS flat fixed using fasteners etc complete all as specified and directed. Make:ECO – 4000 Series Windows (Double Rebate) NCL Windoors, Tata, JSW

S&F Powder Coating aluminium single or double leaf door shutter in single or two panels with standared aluminium section weighing 0.55 kg/m including necessary jointing cleat, glazing clilps,rubber neoprene packing , handles 2 Nos in each door hinges,powder coated snap beading screws etc in partition of partly glazed (5mm thick tinted) and partly prelaminated board 12mm thick (bothside) including locking arrangement, using following section of Jindal or equivalent make complete all as specified and directed (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)

S&F Powder coating aluminium window and ventilator shutters, side hung type without sash bars, with double side shutters wire gauged shutter & glass glazed shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (2 No), hinges type B-21 100mm long (4 Nos) suitable handle (4 No), tower bolt (4 Nos) complete all as specified and directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)

Supply and fixing, Anodised aluminium grills, 6mm dia size 100x100mm fixed to aluminium windows and thickness of powder coating not less than 50 micron, complete all as specified and directed.

Supply and fixi in repair 5.5 mm thick Glass Panes of any colour including with rubber gasket and beading /Glazing clip etc complete all as specified and directed.

S&F in repair Stainless Steel 0.90mm thick sheet. plate rack of size 750mm x 600mm x 230mm complete all as specified and directed

S&F in repair Sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers,and waste pipe, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia, for urinal/wash hand basin / sink complete all as specified and directed

S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore complete all as specified and directed

S&F in repair 15 mm CP long body bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm CP bib tap fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed.

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair CP Soap dish fancy type complete all as specified and directed.

Welding in repairs exc 2.5cm but n. exc. 5 cm in length, thickness of metal to be welded exc,6mm but n.exc. 9mm, including all necessary arrangement for welding complete all as specified and directed.

S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Re-fixing only steel water tubing galvenised, 15mm bore, medium grade with all new fittings and fixed to walls, concealed including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

S&F steel water tubing galvenised, 20mm bore, medium grade with all fittings and fixed to walls, concealed including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

Re-fixing only steel water tubing galvenised, 20mm bore, medium grade with all new fittings and fixed to walls, concealed including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 3 layer white colour water tank, non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc including taking down existing tank complete all as specified and directed.

S&F in repair Vitreous china urinal Half stall type (white) o with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe complete all as specified and directed.

S&F in repair Vitreous china wash basin white, flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe complete all as specified and directed.

S&F in repair PTMT 32/40mm waste coupling of (half or full threaded) minimum weight 45gm complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair 20mm dia Stainless steel Curtain Rod with Brackets & Finials etc complete all as specified and directed.

S&F in repair flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc complete all as specified and directed.

S & F in repair Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc complete all as specified and directed.

S&F in repair wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed.

S&F in repair EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed.

S&F in repairstainless steel grating with or without hole 100/125/150mm dia fixed with white cement complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed.

S&F in repair 100/110mm dia PVC (SWR) P traps, including jointing to waste pipe with solvent cement complete all as specified and directed.

S&F in repair glass shelves of size 600mm x 100mm with transparent glass, rust proof railing fixed with screw complete all as specified and directed.

S & F in repair Stainless steel shelf of size 600 mm x 100 mm with transparent glass,rust proof railing fixed with screw on wall complete all as specified and directed.

S&F in repair corner glass shelves of size 300mm x 300mm with transparent glass, rust proof railing fixed with screw complete all as specified and directed.

S&F in repair CP brass bottle trap having minimum water seal 25mm complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F in repair brass chromium plated tubular towel ring complete all as specified and directed.

S&F in repair brass chromium plated toilet paper holder complete all as specified and directed.

S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete , screwed for iron pipe or brass ferrule and fixed for 25 mm bore of pipe all as specified & directed.

S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and liynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore of pipe all as specified & directed.

Disconnecting existing tanks, setting side for repairing, cleaning and removing all scale and dirt, etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the word "CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, tee, socket, nipple of any size etc complete all as specified and directed.

M&L for washed stone grit plaster on exteior wall in two layers 12mm cement plaster 1:4 (1cement :4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer@ 3kg of cement /sqm, top layer 15mm thick cement plaster 1:0.5:2 (1 Cement:0.5 coarse sand:2 stone chipping 10mm nominal size) in panel with groove all around as per approved pattern including scrubing and washing the top layer with brushes and water to expose the stoe chipping complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40 mm graged crushed stone aggregate as in foundation filling and mass concrete (sunken floors etc) complete all as specified and drected.

M&L for Rendering 15mm thick on bricks work or concrete surface in CM 1:4 with and including water proofing compound to sunken portion with proper slope toward out side and finishing surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shall be measured and paid separately) complete all as specified and directed.

M&L for Liquid water proofing compound complete all as specified and directed

Taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M & L Rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including preparation of new plastred surfaces then applying two coats cement base paint on walls over a coat of primer complete all as specified and directed.

M & L Rendering 10mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including preparation of new plastered surfaces and applying one coat primer & two coats of distemper oil emulsion over 1mm thick wall putty complete all as specified and directed.

M & L Rendering 10mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including preparation of new plastered surfaces and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment and applying 1mm thick wall care putty on plastered surfaces complete all as specified and directed.

M & L for preparation of old decorated plastered or un plastered surface of walls and applying one coat of oil bound distemper upto any height filling the gap or unequal surface with cement mortar/chalk whiting/Putty in any shade complete all as specified and directed.

M&L Preparation of old plastered surfaces and applying applying one coat of Apex weather proof paint complete all as specified and directed.

M&L Rendering 5mm thick in CM 1:3, on ceiling, etc. finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and Preparation of new pastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed.

M&L for preparation of Old plastered surface and applying two coat of white wash on ceiling complete all as specified and directed.

M&L For Preparation of old/new white washed surfaces of wall (plastered or unplastered) for white washing and applying two coat of white wash complete all as specified and directed.

M&L preparation of old surfaces of wall (plastered or unplastered) and applying one coat of cement base paint. complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregates as in sub bases of floors and pavings complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6, type C-2 using 40mm graded crushed stone aggregates as in sub bases of floors and pavings complete all as specified and directed.

M&L for Sand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed.

S&F for Rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including dismantling wrought iron or mild steel work of any descrfiption not otherwise provided incuding two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling asbestos cement (Corrugated, Semi corrugated, etc) sheets in roof covering complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for glazed designer ENDURA tiles, coloured 30cm x 30cm x 8-10mm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Chequrred cement tiles with grey cement and pigment 30cmx30cmx25mm thick set, jointed in neat cement slurry over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Taking down, dismantling of broken/loose portion of chajja , facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork/scffolding and matching with existing surface of facia (including white wash/colour wash or cement base paint) chajja upto 2nd floor complete all as specified and directed.

M&L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed.

M&L for non accessible roof applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulation of weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm, laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick screed bed in cement mortar (1:4) even and fair and one coat of aluminium paint on APP membrane & including taking out /demolition of old treatment complete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified and directed. NOTE :-(a)The work shall be executed at site by the authorised applicator of APP and as approved by the GE.’ (b) The work shall be executed up to 10 mtr height of bldg.

M&L TMT Steel bars 8 to 10 mm dia cut to length, bent to shape required incl cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B-1,using 20 mm graded crushed stone aggregate as in shelves/slabs etc including necessary form work complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed.

M & L Brick work "Except bricks" with curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 for manhole and external pointed flush in same mortar as the work proceeds complete all as specified and directed.

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 8mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butter fly clips. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L For Glazed ceramic coloured tiles in vertical surfaces 450x300X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade with 10 mm thick cement plaster in C.M 1: 4 complete all as specified and directed

S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) Size of tile exc 0.18 Sqm but not exc 0.38Sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and Screed bed or bedding layer 15mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) Size of tile exc 0.18 Sqm but not exc 0.38Sqm ,in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in CM 1:4 for receiving tile complete all as specified and directed.

S&F Non-skid Ceramic coloured tiles 7 to 8 mm thick (square /rectangular) Size of tile exc 0.11 Sqm but not exc 0.18Sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and Screed bed or bedding layer 15mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with grey cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed .

S&F in Repair brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe, 15 mm bore, complete all as specified and directed .

S&F in repair 15mm Brass CP wall mixer with hand shower for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall complete all as specified and directed

S & F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed

S & F in repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , laid in trenches or floor complete all as specified and directed

S & F in repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , laid in trenches or floor complete all as specified and directed

S & F PVC (SWR) Bends in any radius 110 mm bore with access door in repair complete all as specified and directed.

S & F PVC SWR Bends in any radius 75 mm bore with access door in repair complete all as specified and directed.

S&F PVC (SWR) Vent cowl 110 mm bore in repair complete all as specified and directed

S&F PVC (SWR) Vent cowl 75 mm bore in repair complete all as specified and directed

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M&L Granite Black Colour of any type 18 to 20mm thick machine cut as in cooking plateforms and over 20 mm screed bed in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

M/S SATYA SAI CONSTRUCTION (BID ID -3386226)

M/S YOGESHWAR ASSOCIATES GOVT CONTRACTOR (BID ID -3384159)