15th Finance Commission Tied 2024-25

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B

Plain Cement Concrete 1:4:8 Mix (one part cement, Four part sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.as Per Standard Specification.

Supplying and erecting centering for sides and soffits including supports and strutting upto 3.00m height for plane surface such as RCC Slab, Rectangular Beams, Tee (or) ELL Beams, Lintel Bed Block, Slabs, Landing Slabs, Beams Canopy, Side Slab (or) Square (or) Round columns etc., as detailed below with all cross branching using M.S. Sheets of size 80cm x 60cm and B.G. 10 stiffended with welded M.S. Angles of size 25 x 25 x 3mm for boarding laid over silver oak or country wood joints of 10cm to 30cm to dia spaced at 75cm c/c etc., complete complying with standard specifications as directed by departmental officers etc., complete.as Per Standard Specification.

supplying fabricating and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc.,

Reinforced Cement concrete 1:1.5:3 (One part cement one and half part sand and three part of aggregates) mix using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of materials to site loading and unloading charges and all labour charges etc complete with standard specification.

Brick Work in Cement Mortor 1:5 Mix (one cement, five M.Sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Supplying and fixing of M.S.grill gate of approved design using necessary mild steel flats for inner and outer members which should be fixed to Gate frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Plastering with cement mortar 1: 5 ( one cement and five P.Sand) mix to 12mm thick including cost and conveyance of all materials to site including curing etc.,complete as per standard specification

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications

Thiruvengadam Ramalingam Suresh (BID ID -1221380)