CONSTRUCTION OF UG PIPELINE FOR VILLAGE SHERGARH GIAN SINGH OUTLET AT RD 537400 OF ABOHAR BRANCH

Excavation By Mechanical Means( Jcb Or Hydraulic Excavator) In Trenches For Pipelines With Straight Or Open Cutting In Streets Or Open Area Including And Dressing Sides Levelling Of Beds Of Trenches To Correct Grade, Cutting Joint Holes, Refilling Consolidation Including Cost Of Diversion For Traffic, Crossing Over Trenches For Access To The Houses, Watching Fencing Etc. And Removal Of Surplus Soil Outside/Inside The Town Invovling Lead Upto 15 Mtr Complete In All Respect.

Earth Work In Excavation In Foundations Trenches Etc. In All Kinds Of Soil Where Pick-Jumper Work Is Not Involved And Not Exceeding 2.0 Metres Depth Including Dressing Of Bottom And Sides Of Trenches, Stacking The Excavated Soil Clear From The Edge Of Excavation And Subsequent Filling Around Masonry In 15 Cm, Layers With Compaction Including Disposal Of All Surplus Soil As Directed Within Lead Of 30 Metres.

First Class Brick Masonary 229 Mm Thick Laid In Cement Sand Mortar 1.6 In Foundation And Plinth Including Supply Recarriage Of Bricks Cement .

10Mm Thick Cement Plaster 1.4 On Sides Walls

10Mm Thick Cement Plaster 1:4 On Bed And Top.

Reinforced Cement Concrete 1:2:4 Hand Mixed But Including Steel Reinforcement

Cement Conc.1:2:4 Including Supply, Carriage & With Stone Ballast Or Shingle

Cement Concrete 1:4:8 With Brick Ballast 40Mm Gauge

Providing Lowering, Jointing And Cutting Of Rcc Np-2 Plain End Pipes 700 Mm Dia With Rcc Collars & Laying Same To Correct Gradient And Alignment And Jointing Ends And Fixing Collars With Cement Mortar 1:2 As Per Is 458:2003 In All Depths Complete In All Respect.

Providing Lowering, Jointing And Cutting Of Rcc Np-2 Plain End Pipes 150 Mm Dia For Vent Pipe Into Trenches And Laying Same To Correct Alignment As Per Is 458:2003 ( @2.50 Metre / No)

Wrought Iron And Mild Steel Ladders, Framed Grills, Grating Etc. Complete Fixed In Position In D-Tank

Providing Orange Colour Safety Footrest Of Minimum 6Mm Thick Plastic Encapsulated As Per Is:10910 On 12Mm Dia Steel Bar Confirming To Is: 1786 Having Minimun Cross Section As 23Mm X 25Mm And Over All Minimum Length 263Mm And Width As 165Mm With Minimum 112Mm Space Between Protruted Legs Having 2Mm Tread On Top Surface By Ribbing Or Chequering Besides Necessary And Adequate Anchoring Projections On Tail Length On 138 Mm As Per Standard Drawing And Suitable To With Stand The Bend Test And Chemical Resistance Test As Per Specification And Having Manufacturer'S Permanent Identification Mark To Be Visible Even After Fixing, Including Fixing In Manholes With 230X150X75Cm Cement Concrete Block 1:2:4 (1 Cement: 2 Sand: 4 Stone Aggragate) Complete As Per Design.

Centreing & Shuttering For Concerte Faces

Dismantling Of Brick Work In Cement

Any other item

Ramesh Kumar (BID ID -692117)

JAGPAL SINGH CONTRACTOR (BID ID -696051)