SPECIAL REPAIRS TO OFFICE BUILDING AND REPLACING THE AC SHEET ROOFING BY PROVIDING WITH NEW GALVALUME SHEET IN TNCSC SEMI COVERED SHED CAMPUS AT PALLATHUR IN SIVAGANGAI DISTRICT

Dismantling,clearing away and carefully stacking materials useful for re-use for any thickness of wall. Dismantling of P.C.C

Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and laying of High profield colour galvolume sheet with combination 55AI:43.4Zn:1; 6SI of TCT bent type 0.50mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile /CR sheets of approved quality for roofing with nessasary fixing arrangements like 65mm abd longhexagonal head screws with EPDM rubber seal, etc., complete complying with standard specification and as directed by the departmentalofficer, during execution of work. (Test certificate for quality should be furnished on receipt of materialat site..

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directedcomplete as directed

Painting Old Plastered Wall Surface with One finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

PAINTING OLD IRON WORKS for doors, windows and Ventilators, Iron bars, Weldmesh, wiremesh, screen, steel bars, flats and other similar works etc., with ONE COATS of approved first quality of synthetic enamel paint in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. (The paint to be used should be got approved by the Executive Engineer.

Please Enable Macros to View BoQ information