SSDA/42/ED-23/2026 dated 09/01/2026

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or tacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation.

(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(B) Do - by fine sand

Cement concrete with graded stone ballast (40 mm. size) excluding shuttering in (6:3:1) proportion.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work.

Ordinary mix Cement concrete (1:1.5:3) with graded stone chips (20 mm. size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. (i) Pakur Variety

Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightning and removal of loose rust ( if necessary) cutting to requisit length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor steel / Mild steel

Brick work with 1st class bricks in cement mortar (6:1) (a) In foundation and plinth.

In Superstructure ( Ground Floor)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]

20 mm thick plaster with mortar (6:1) .Ground Floor

10 mm thick plaster With mortar (4:1) Ground Floor

Neat cement punning about 1.5 mm thick in wall, dado, window, sills, floor, drain etc.

25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size) and painting the top surface with a coat of bitumen [VG.40 ] using 1.7 kg. per sq.m. including heating the bitumen and cost and carriage of all materials complete. [Bitument to be supplied by the Agency]

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (i) 25 mm. thick.(I- 8(ii), Page-40)

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to I.S.1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non friction projecting type hinges, box type, glazing clips, lugs, locking bracket, handle plate etc. including hoisting in position, straightening if required, fixing lugs in cement concrete (4:2:1) with stone chips 19mm. down, cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.

i) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars

ii)Two point nose aluminium handle including fitting and fixing.

iii)Aluminium peg stay 300 long including fitting and fixing.

Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall). ) 4 mm thick

(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

B) Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface.(b) Two coats

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coats

Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.(I- 10, Page-157) Two Coats

SANITARY:Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap

Closet seat of approved make with lid and CP hinges rubber buffer and brass screws supplied, fitted and fixed complete. i) Bestolite (solid type) white. (PWD schedule item no-10, page- 81)Plastic (hallow type) black.Comod seat

Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125 mm with Porcelain of approved make. (I- 9, Page-81)

Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). 450 mm X 350 mm.

Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.15 mm

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. For Exposed Work. CPVC Pipes Class-1, SDR-11.15 mm dia pipe

25 mm dia pipe

32 mm dia pipe

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. 530 mm X 430 mm x 180 mm

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (I- 9, Page- 43) 450 mm long.

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps (I- 10, Page- 43) 900 mm long

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc. White. (I- 2, Page- 36) .cistern

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (I- 6, Page- 37) .500 litre capacity

Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (I- 12, Page- 38).plastic water storage tank

Labour for punching hole in plastic water storage tank upto 50 mm dia. (I- 13, Page- 38).

Renewing high pressure polythene ball cock of approved quality with polythene ball and aluminium lever complete for pipe of 32 mm. dia.. (I- 5, Page- 39

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 Kg per Sq.cm (for water lines only). (I- 5vii, Page- 5)a) 25 mm dia

b) 32 mm dia

A) Supply of UPVC pipes, fitting and fixing conforming to IS:13592 - 1992 i) single socketed (I- 23ii, Page- 46)a) 110 mm dia

b) 75 mm dia

B) Fittings a) Coupler 110 mm dia

b) Plain Tee 110 mm dia

c) Door Tee 110 mm dia

75 mm dia

d) Door Bend 110 mm dia

75 mm dia

e) Vent Cowl 110 mm dia

f) 'P' trap 110 x 110, 75mm dia

g) WC connector (45 cm long) W/lip ring

Construction inspection pit of inside measurement 600mm x 600mm x upto 600mm (deep) with 250mm thk. 1st, class brick works in cement mortar (1:4) on all sides, bottom of the pit consisting of 100mm thk. cement concrete (:3:6) with stone chips over a layer of jhama brick flat soling 15mm thl, (1:4) cement plaster to inside walls and out-side walls upto G.L and 20mm thk (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chipps as per direction, neat cement finishing to entire internal surface top of the pit covered with 100mm thl, RCC. slab (:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6mm thk coment plaster (1:4) in all external surface of the slab and one 560mm dia RCC manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earth work in excavation and removing spoils after work complete in all respect with all cost and materials. (I- 1, Page- 87)

Construction of Septic Tank of different capacities as per approved drawing with 1st class brick work in cement mortar (4:1) including two 560 mm dia RCC manhole cover of approved make supplied, fitted and fixed in the top slab with necessary fittings, 19 mm thick cement plaster (4:1) with neat cement finish to the internal surfaces and 12 mm thick cement plaster (4:1) to outside wall upto 200 mm below GL. floor finished with 25 mm thick grey artificial stone including supplying, fitting and fixing all necessary specials, fittings, SW tees, CI foot rest etc. including excavating earth in all sorts of soil shorting, bailing and pumping out water as necessary ramming, dressing the bed and refilling the sides of the tank with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement, complete in all respect as direction of Engineer-in-Charge.(I- 3, Page- 88)i) For 10 user

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (6:1) band all round and cement brick work (6:1) upto 0.90 metre from top with 19 mm thick cement plastering (4:1) to inside face upto the depth of cement brick work, 12 mm thick cement plaster (4:1) on top of the RCC cover slab including filling bottom 1.00 M of inside of the well with brick metal (50 mm to 63 mm size) including RCc cover slab of designed thickness with cement concrete (4:2:1) with stone chips with necessary reinforcement and shuttering including one 560 mm dia RCC manhole cover of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making necessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the excess earth from the premises as per direction complete in all respect with all cost of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (6:1) and 1.0 m inside dia.(I- 4, Page- 89)

GST, as applicable @ 18% .

Labour welfare cess @1% .

Please Enable Macros to View BoQ information