Supply and laying of HT UG inter linking cable for extension of 11 KV HT supply to the proposed PRTC Battery Bus Charging station in Puducherry

Supply, erection and commissioning of Vacuum Circuit Breaker 12KV, 25 KA, 1250A Horizontal drawout out Indoor VCB fitted with Manual/ motor operated spring charging Mechanism suitable to link with the existing Megawin Make, Type: MHVCB) as per the specification

Supply, erection and commissioning of 11KV, 630 A, 3 Pole Modular extensible Type Outdoor SCADA capability SF6 insulated ring main unit comprising of 4 way ring main units with 1 Potential Transformer and 1 FRTU and Modem (3Nos of Load break switch (630A) + 1 Circuit Breaker (630A)) and allied accessories suitable to link with the existing RMUs in the current project area

Supply, Erection and commissioning of 11KV, 630A, 3 Pole Modular extensible type outdoor SCADA cabability SF6 insulated ring main unit comprising of 3 way ring main units with 1 Potential Transformer and 1 FRTU and Modem ( 3Nos of Load break switch ) and allied accessories

Supply of heat shrinkable straight through Joint for 11KV(E), 3 x 400 Sq mm, Aluminium core XLPE HT UG cable with all accessories.I/2004).

Supply of 11KV (E) 3C x 400 Sq. mm, Aluminium core XLPE insulated armoured HT UG cable (as per IS 7098/part-II/1985) without any joint.

Supply of heat shrinkable long sleeve indoor type cable end termination kit and other joining materials suitable for 11KV 3 x 400 Sq.mm Bi-metalic terminals special type as specified in the tender specification.

Supply of Cast Iron pipe of 150mm Dia. for cable crossing of drains, road, sanitary and water supply lines and the like as per IS.1239/part-1/2004 as required in the Bituminous Road. (Road Cross / Drain Cross).

Labour Charges for laying of one run of XLPE power cable of grade 11 KV of size 3C x 400 Sq.mm direct in ground including excavation of trench of size 0.5 m (W) x 1.2m (D), sand cushioning, protective covering with RCC trough and refilling the trench etc. as required in Bituminous Road (Road Cross / Drain Cross, including laying of UG cable through the C.I. Pipe.

Labour charges for providing of end loose of 11KV 3 x 400 Sq.mm, XLPE cable at both ends of HT UG Cable and RMU (as specified in HT Schedule) including excavation of trench sand cushioning, protective covering with RCC trough and refilling the trench etc. as required in Bituminous Road (Road Cross / Drain Cross.

Labour charges for providing of heat shrinkable straight through joint kit including required aluminum ferrule and other joining materials suitable for 11KV 3 x 400 Sq.mm XLPE power cable as specified in the tender specification.

Labour charges for providing of heat shrinkable long sleeve indoor type cable end termination kit including required aluminum ferrule and other joining materials suitable for 11KV 3 x 400 Sq.mm XLPE power cable at Transformer end as specified in the tender specification

Formation of RCC Mass plinth foundation and support structure for about 1 meter from ground Level for placing 11KV, 3 Pole Modular extensible type outdoor SCADA cabability SF6 insulated ring main unit comprising of 4 way and 3 way ring main units including required concrete materials (2 Nos.)

Removal of surplus earth, transportation of surplus materials, if any, to stores section office including coiling the unused cable provided with end caps for both cable ends and removal of cable drum and other materials and unloading at the central office section office as per the direction Engineer - in – Charge

Supply and Provision of Earthing of RMU and One No. of VCB by using 50 mm dia G.I. pipe including excavation of earth pit, fabrication of earth pipe, providing required charcoal, salt and earth pit with lid as per the direction of the Engineer -in -charge

PAOWER TECH ENGINEERS

DQBYDT PVT LTD

M/S. VENUS ELECTRICAL WORKS