PROVN OF COMPLETE TOILET BLOCK (MEN AND WOMEN) ALONG BLDG NO. P-388 (GURUDWARA SAHAB) AT FATEHGARH CANTT

Amount

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation / trenches for laying pipes/ cable and similar work and getting out in soft /loose soil etc complete all as specified and directed

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for RCC (designe Mix) M-25 (using 20 mm graded stone aggrete) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (designe Mix) M-25 (using 20 mm graded stone aggrete) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for RCC (designe Mix) M-25 (using 20 mm graded stone aggrete) as in lintel Beams, roof beam complete all as specified and directed.

M&L for RCC (design mix) M-25 as in slab supported on wall, beams and columns in floor, roof, landing, balconies, sheves and the like complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cover slab for manhole with plane face set in cement mortar (1:6) with engroving MES marking of size as directed by EIC in conrete complete all as specified and directed.

M&L for RCC (Nominal mix) type B-1 (1:2:4) (20 mm graded stone aggregate) as in chajjas complate all as specified and directed.

M&L of mild steel TMT Bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed .

All as item No 10 here in before but but 6mm to 8mm dia complete all as specified and directed .

M&L of mild steel TMT Bars but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed .

M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius in half brick thick wall built in cement mortar (1:6) complete all as specified and directed.

M&L broken stone hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rolled/ rammed to a true surfaces complete all as specified and directed.

M&L for PCC type E-2 (1:5:10) (using 40mm graded stone aggregate) as in foundations filling and mass concrete etc. complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in flooring and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of chalk whitening complete all as specified and directed.

M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) for plinth pretection finishing even and smooth without using extra cement with necessary expension joints at every three metre or change of direction complete all as specified & directed.

M & L for 5 mm thick rendering in CM (1:3) on fair faces of ceilling concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceilling complete all as specified and directed.

M&L Non skid mat finished coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over & including 15mm thick screed bed or bedding layer of cement mortar (1:6 ) for laying floor finishes complete all as specified and directed.

M&L Glazed coloured ceramic tiles in vertical surfaces of size 450mm x 300 mm x 7 mm thick (pattern/digital tiles) set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10 mm thick plastering on fair faces of brickwork or concrete surfaces in CM (1:4) to receive wall finishes complete all as specified and directed.

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S&F 32 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & fixing Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Preparation of new steel surface of any description not otherwise described over 10 cm width or grith and applying two coats of synthetic enamelled paint over one coat of red oxide primer alround complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S&F 300 mm long aluminium anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished susrfaces of concrete complete all as specified and directed.

M&L for Formwork to sides and soffit of floor or roof beams,beam haunching, girders,bressum-mers, lintel, cantilevers, shelves including supports,overhangs,etc.also plays between floors and beams, etc for rough finished susrfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished susrfaces of concrete complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished susrfaces of concrete complete all as specified and directed..

S & F Vitreous China Urinal, Half stall type, white), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed.

S&F Vitreous China Wash Basin, white, flat back, of size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and 15 mm dia Pillar taps fancy type chromium plated complete all as specified and directed

M & L for 32mm Bottle trap of PTMT fixed to Wash hand basin having minimum waterseal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) etc complete all as specified and direted.

S& F Gun metal glove or gate valves with iron wheel head, screwed both ends for 20 mm bore GI pipe and fixed screws complete all as specified and directed

S&F Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity white, with inlet, ball float and handle including brackets of angle iron of size as directed by EIC (brackets shall be painted with 02 coats of synthetic enamel paints over a coat of red oxide primer) complete all as specified and directed.

Supply only integral Water Proofng Compound complete all as specified and directed.

S&F conclead type Stop valves angle, facy type , screwed down for GI pipe and fixed to 15mm bore pipe , complete all as specified and directed.

S&F Chromium plated bib tap Chromium plated fancy type screwed down for GI pipe and fixed to 15mm bore GI pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F vitreous china urinal partition white of size 310 mm X 700 mm complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT Float valve complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling trenches or laid in floors etc complete all as specified and directed.

All as per item No.54 but 20 mm bore tubing complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Vitreous China Wash down water closet pan semi-pedastel pattern (anglo indian type) white in colour connected with and including S or P Trap including water closet seat ,black ,closed pattern with flat bottom and cover and MS chromium plated hinging device complete all as specified and directed.

S&F in vitreous china squating pan "Orrisa" pattern of size 580 mm x 440 mm white with 'P' or 'S' trap front or back inlet with integral foot rest including provision of lime concrete bedding complete all as specified and directed.

M&L of 75 mm dia. Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) complete.all as specified and directed .

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm in soft / loose soil complete all as specified and directed.

Removal of surplus excavated soil to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

S & F PVC ( SWR) pipe of 75 mm dia single socketed in any length with rubber ring joints ,fixed to wall or laid in floor complete all as specified and directed.

S & F PVC ( SWR ) pipe of 110 mm dia single socketed in any length with rubber ring joints ,fixed to wall or laid in floor complete all as specified and directed.

M & L PVC ( SWR ) vent cowl of 75 mm dia complete all as specified and directed.

S & F PVC ( SWR ) bend of 75 mm dia complete all as specified and directed.

S & F PVC ( SWR ) bend of 110 mm dia complete all as specified and directed.

S&F sheet glass 3 mm thick ordinary quality and gazing with oil putty in square n exc 0.5 sqm each panel complete all as specified and directed.

M&L 150mm dia (internal) SGSW pipes grade ‘A’ laid in trenches and jointed complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in bed of drain for 150mm bore pipe inlcluding packing under and haunching against the side of pipes after they are laid in and tested complete all as specified and directed.

M&L for soakage well of size 1.80 meter dia and 3.00 meter deep with and including necessory excavation and eath work complete all as specified and shown on drawing NoTD/237 sheet 1/1 of CE LZ Lucknow and as directed.

M&L for septic tank, for 50 users with and including necessory excavation and eath work complete all as specified and shown on drawing complete all as specified and directed and shown on TD/217 sheet 1/2 CELZ Lucknow

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed.

Cutting existing CI/GI pipe line of 40 mm dia for insertion of tee of size 40 x 40 x 25 mm for branch connection including excavation and earth work complete all as specified and directed.

Supply and Fix Gun-metal, globe or gate valves, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M & L for surface excavation n. exc. 30 cm deep and avg 15 cm deep and getting out soft and loose soil complete all as specified and directed.

M & L for 75mm thick PCC 1:4:8 type D-2 (using 40mm stone graded aggregate) as in sub base complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade in floors with grey pigment and cement over 20 mm thick sand cushion complete all as specified and directed

M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in kerb stone, coping and all other siilar works including necessary formwork etc complete all as specified and directed

M&L for point wiring with 1100 volt grade PVC insulated and unsheahted 1.5 Sqmm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sqmm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in and including concealed PVC rigid conduit medium grade with fittings (ISI marked) not less than 20 mm dia & 1.6 mm thick sunken pressed steel galvanized terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing / fixing switches etc complete all as specified and directed for the following :- Note :- (i) The quoted raqte is deemed to be included for the chases fitting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour

(a) One light / fan / exhaust fan point controlled by one swtich

(b) One 5 pin 5 Amp switch socket combination point on an independent board

S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed.

S&F 5 Amp switch socket combination flush type complete all as specified and directed.

S&F ceiling rose PVC / poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

Supply and fixing PVC exhaust fan of sweep 300 mm complete with self closing MS louvers, mounted in suitable opening arrangement and suitable on 230 volts single phase 50 Hz AC supply and connecting up with and including opening of suitable hole, fixing and making connection and fixed by using 4 Nos, 200 mm long 12 mm dia bolts, nuts and washers and grounted in wall in CM 1:3 complete all as specified and directed.

Supply and fixing MCB distribution board SPN 240 volts 6 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and directed.

S&F of MCB SPN 16-40 Amp 240 volt, 'C' curve complete all as specified and directed.

S&F MCB of MCB SP 6 to 32 Amp 240 volts 'C' curve 10 KA complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holderand LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting 1 x 20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

M&L for sand cushioning to U/G cable in layers of 23 cm thick( 8 Cm before laying the cable and 15 Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Puned down volume shall be measured.

Supply and lay burnt best quality locally available old size sub class 'B' bricks laid in trenches perpendicular to U/G cable for cable protection complete all as specified and as directed.

Supply and lay in trenches or passing through pipe XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 10 Sqmm 4 core complete all as specified and as directed.

S&F of 25 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified and directed.

M/S SRI JAGDAMBE TRADERS

Shree Gopal Engineers & Contractor