Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹32.3 LAccepted-AOC 14 4A KALI PRASAD C HAKRABORTY ST CAL KOLKATA 700003 | KOLKATA | WEST BENGAL | 700003 | 1 | Accepted-AOC ACCEPTED | |
| 2 | 2₹34.4 L+₹1.6 L (4.96%)Rejected-Finance 63E SASHAN KALITALA ROAD KOLKATA 700 008 | KOLKATA | WEST BENGAL | 700008 | 2 | Rejected-Finance Being other than lowest | |
| 3 | 3₹34.8 L+₹2.0 L (6.23%)Rejected-Finance 3 IBRAHIM ROAD KHIDDERPORE KOLKATA 700023 | KOLKATA | WEST BENGAL | 700023 | 3 | Rejected-Finance Being other than lowest | |
| 4 | 4₹35.2 L+₹2.4 L (7.39%)Rejected-Finance 107 1F TOLLYGUNGE ROAD KOLKATA 700026 WB | KOLKATA | WEST BENGAL | 700026 | 4 | Rejected-Finance Being other than lowest | |
| 5 | 5₹35.6 L+₹2.8 L (8.41%)Rejected-Finance 89A UPEN BANERJEE ROAD PARNASREE BEHALA KOLATA 700060 WEST BENGAL | KOLKATA | WEST BENGAL | 700060 | 5 | Rejected-Finance Being other than lowest |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
3 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Alipore
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
REPAIR/ REPLACEMENT OF WOODEN/ ALUMINIUM JOINERIES AND OTHER MISC B/R WORKS IN II LINE UNDER GE ALIPORE KOLKATA
2024_MES_659376_1
GE/ALP (8323B) KOLKATA OF 2024-25
Open Tender
Civil Works
Item Rate
180 days
GE (ALIPORE) KOLKATA
CLASS D AND CATEGORY b (i)
9 documents required · 9 mandatory
₹500
Garrison Engineer, Alipore
₹66,000
Yes
GE (ALIPORE) KOLKATA
6 Sept 2024
12 Jun 2024
10 Jul 2024
12 Jun 2024
3 Jul 2024
26 Jun 2024
12 Jun 2024 - 19 Jun 2024
20 Jun 2024
Amount
Taking down chokhat with shutter( without taking down shutters from the frame) n.exc 1.5 sqm complete all as specified and directed.
All as per item No 1 above but exc 1.5 sqm but n.exc 4.0 Sqm complete all as specified and directed.
S&F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S Square tube, all as per specification and drawing shown on SSR
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site as per specification and drawing.
S&F MS flat iron as in hold fast and similar work as specified Gde Fe 410-0 or Fe 310-0.
M&L PCC (1:2:4) Type B1 (using 20mm graded stone aggreate) for fixing hold fasts, angle etc.
S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F, 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fix in repair Aluminium anodised (powder coated) Three track sliding window frame with shutters with (2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter:- (A) Sections for shutter :- (i) "H' section 39 x 20 x 1.50 mm thick. (ii) 'Interlock' section 39 x 20x 1.50 mm thick. (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick. (B) Section for frame :- (i) Top & Sides 123 X 29.70X 1.50mm not less than 1.30 Kg /RM. (ii) Bottom 123 X 29.70 X 1.50mm not less than 1.502 Kg /RM and complete all as specified and directed.
Taking down shutters of any description exceeding 1 Sq. M and not exc 2Sq.M each at any storey of building complete all as specified and directed.
M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm at any storey of building
S&F 100mm MS Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repair 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section.
S&F 100mm long aluminium anodised barrel tower bolts of extruded section.
S&F in repair 150mm long aluminium anodised barrel tower bolts of extruded section.
S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed.
S&F in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed.
S&F 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described oer 10cm width or girth and application of two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old steel surfaces of any description and applying one coats of synthetic enamel paint complete all as specified and as directed .
S&F in repair 3.00 mm sheet glass, ordinary quality and glazing with oil putty in Sq n exc 0.50 Sqm in each pane complete all as specfied and diected.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specfied and directed.
Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete.(upto 12 storey)
M&L for Rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.(upto 12 storey)
M&L for Rendering 10mm thick with CM (1:3) on or concrete surfaces and finished the surface even and smooth without using extra cement as in ceiling complete all as specified and as directed by Engineer-in-charge.(upto 12 storey)
Material and labour for applying 3mm thick birla wall care putty or equivalent (each layer n.exc 1mm thick) on new plastered surfaces etc incl necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg).
Material and labour for two coat acrylic distemper (white or coloured as per site reqmt) over one coat of priming chalk whiting on new or previously untreated plastered surfaces incl preparation of surface of wall and incl necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg). Note : No separate payment shall be made for colour of distemper where required or complete all as specified and as directed by Engineer-in-Charge. Cost is included in unit rate.
All as per item No 32 above but two coat of white wash on ceiling (upto 12 storey).
S&F in repair for 25 mm curtain rod fancy type Mild steel chromium plated with fancy brackets and knobs complete all as specified and directed.
DK Contractor
M/S J S ENTERPRISES
DEEPAK KHATTAR
M/S AVIJEET INTERNATIONAL
RST ENTERPRISE
SOVA ENTERPRISE
MS HORIZEN
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .