PROVN OF 03 X HIGH MAST LIGHT IN CERTAIN UNITS AT MIL STN JAISALMER

Amount

Supply & Fixing, installation of Galvanized steel high mast lighting system of 16 meter in two section, 3 mm section thickness, in two section with head frame top 3mm and bottom 4mm having top diameter 150mm and bottom diameter 360mm suitable for 09 LEDs fixtures of 200 watt with lighting protection finial GI single spike length 1200mm & lantern carriage of 9 arm in two segments having double drum winch of capacity SWL 500 KG self lubricating & stainless steel wire rope of grade AISI1316 dia 6mm having number of rope, 3 Nos of 6mm for lantern carriege, 2 Nos of 6mm for double drum winch, having breaking load capacity 2350 Kgs per as wire rope with raising cable flexible copper 5 core 2.5 to 4.0 Sqmm and moter of capacity 1.5 HP single speed reversible type 415 Volt/240 Volts complete with anchor plate & template foundation bolts & nuts with complete foundation as per manufacturer drawing and specification complete all as specified and directed by Engr-in-Charge. Note :- Rate quoted by the Contractor shall deemed to inclusive of foundation, earth work, excavation & PCC.

S&F High Mast Light Integral type LED Flood Light of 200 Watt with 10KV Surge Protection IP-66 System efficancy >=110 LPW complete for high mast light aaplication complete with fixing arrangment & bolts complete all as specified & directed by Engineer-in-charge.

M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom , burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate & salt up to ground level connected to galvanized iron strip 25 x 3 mm as earthing lead by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including all necessary earth work, excavation, earth chamber with PCC 1:3:6, type C1 and RCC chamber cover of PCC 1:2:4 with handle and 20mm dia GI watering pipe with funnel and wire mesh etc and testing on complete all as specified & directed by Engineer-in-Charge.

NOTE FOR ITEM No. 3.00 [i]. Excavation & earth work in any type of soil including removing of surplus material upto 100M [ii]. PCC (1:3:6) type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC (1:2:4) type B1 cover 50x50 cm with 8mm round bar @ 15 cm C/C both ways. [iii]. Main earthing strip from earth electrode to test point upto 7.5 mtr. [iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs and charcoal & salt as reqd. [v]. GI protection pipe of size 40 mm bore light grade 7.5m.

Supply, installation, commissioning and testing of High Mast Timer Panel tappered (CPRI Approved) out door type 415 Volts, 50 Hz, 3 Phase 4 wire supply Padastal mounted center opening with locking arrangement , factory assembled, weather and vermin proof (protection class IP-54) canopy on top, outer door made out of 3.15 mm thick CRCA sheet for individual hinged type door for MCBs , powder coated and supported on 40 mm x 40 mm x 5 mm M.S angle iron frame complete to accommodate including the following:-

ITEM NO. 4.00 CONTD.... (a) MCCB 100 Amp-01 (b) TP Contactor 63 Amp-01 No (c) TPN MCB 63 Amp-01 No (d) Digital Timer Switch astronomical type-01 No (e) SP MCB 16 Amp-09 Nos (f) Push Button-02 Nos (g) Toggle Switch-01 No (h) Glass Fuse-01 No (j) Neutral Link-01 No (k) Terminals (a) Incoming Suitable 35 Sqm-01 No (b) Outgoing 16 Sqmm (Close Type)-04 Nos (c) Outgoing 6 Sqmm (Close Type)-03 Nos

Supply and Laying of XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 16 Sqmm 4 core complete all as specified and directed by Engineer-in-charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ disintegrated rock complete all as specified & directed by Engineer-in-charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Removing excavated material soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.

M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as specified and directed by the Engineer-in-Charge. Note :- Punned thickness of sand cushioning shall only measured for the purpose of payment.

Supply & laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and n. exc 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified and directed by the Engineer-in-Charge.

S&F LED Aviation Light single dome suitable for High Mast Light complete with fixing arrangment & bolts complete all as specified and directed by the Engineer-in-Charge.

M& road cutting in trenches for laying cable protection pipe including making good the surface with top 200mm thick shall filled with PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) complete all as specified & directed by Engineer-in-charge. Note :- (i) Rate quoted by the Contractor shall deemed to inclusive of road cutting, earth work, excavation & PCC. (ii) Supply and laying of pipe will be measured and paid seperately.

S&F steel water tubing 40 mm bore, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in trench on pole for protection of cable complete all as specified & directed by Engineer-in-charge.

Supply & fixing feeder pillar box out door tpye not less than 0.60 M x0.60 M x0.60 M made out of 3.15mm thick CRCA sheet powder coated dust & vernin proof supported on angle iron frame 40x40x5 MM, connected with aluminium bus bar 04 Nos rated capacity fix vertically inside the panel 200, Amp for netural supported on porcelain insulators including painting with two coats red oxide primer and PCC foundation complete all as specified & directed by Engineer-in-charge.

SHREE KARNI LIGHT HOUSE (BID ID -3082483)

M/s Yash Electrical and Maintenance (BID ID -3082398)

SHREE BHAGWATI ENTERPRISES (BID ID -3082149)

NAGEL ENTERPRISES (BID ID -3075350)

SHRI HARI CONSTRUCTION (BID ID -3083460)

M/s Shree Construction Company (BID ID -3083449)

Anil Builders (BID ID -3082333)

M/S Tanisha Traders (BID ID -3081948)

Deccan Enterprises (BID ID -3081651)

GITANSH ENGINEERS AND COMPANY (BID ID -3081682)

Rasam Engg Co. (BID ID -3075811)