Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC 12 NO 12 IRATTAI PILLAYAR KOVIL STREET NEAR REAL VALUE FLAT VELACHERY 733 CHENNAI TAMIL NADU 600042 | CHENNAI | TAMIL NADU | 600042 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹13.3 L+₹72,960 (5.80%)Rejected-Finance VILL JAMGAHAH PO JAMGARAH LAUDOHA BURDWAN BURDWAN EASTCHM WEST BURDWAN BARDHAMAN 713363 WEST BENGAL INDIA | BURDWAN | BURDWAN BARDHAMAN | WEST BENGAL | 713363 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹13.9 L+₹1.3 L (10.7%)Rejected-Finance VILL MANKAR NORTH RAIPUR PO MANKAR DISTT PURBA BARDHAMAN PIN 713144 WB | MANKAR | PURBA BARDHAMAN | WB | 713144 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹15.0 L+₹2.4 L (19.1%)Rejected-Finance 00 HAIDARPUR JAMALPUR ROAD SADAR JAUNPUR UTTAR PRADESH 222001 | JAUNPUR | UTTAR PRADESH | 222001 | L4 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | Elite Enterprises L1 | M/S. R.K. ENTERPRISES L4 | M/S KARMAKAR AND COMPANY L2 | M/S ABHINABA ENTERPRISE L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | S&F for post top lantern LED light fitting 8/10 watts (Bollard) with cast aluminium spigot lid cover and clear acrylic cover with IP65 protection complete with all accessories including fixing arrangement on top surface of boundary wall or on pillar by providing GI pipe of suitable size and length as per site requirement and making good the distrubed portion to match with existing surface complete as in repair all as specified and directed.
(Make:- Havells, Cat Part No. CONEBLS8WLED830PSYMTOPC with warm light /Crompton greaves, Cat No LBLSR-10-CDL with warm light or equivalent in Philips)
(Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge.
(b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge.
(c) LED light fitting and drivers shall be of same make.
(d) Purchase voucher shall be submit at the time of payment claim.) | 10 | Each Job | 5,800 ₹58,000 | 4,780 ₹47,800 Lowest | 6,000 ₹60,000 | 6,000 ₹60,000 |
| 2.00 | M&L for MCB, FP capacity 32 Amps to 63 Amps, 240 volts with rupturing capacity 10 KA, 'C' series including providing thimble for out going cables complete all as specified and directed. | 6 | Each | 2,400 ₹14,400 | 1,148 ₹6,888 | 1,200 ₹7,200 | 500 ₹3,000 Lowest |
| 3.00 | M&L for 32mm dia street light bracket made out of galvanized iron tubing (medium grade) of 1.5mtr long with complete all fittings such as nuts & bolts, washers as required, welding and flanges etc, fixed on steel tubular pole/PCC poles including taking down of old unserviceable bracket complete all as specified and directed. | 20 | Each Job | 750 ₹15,000 Lowest | 1,090 ₹21,800 | 1,200 ₹24,000 | 900 ₹18,000 |
| 4.00 | M&L for 25mm dia street light bracket made out of galvanized iron tubing (medium grade) of 1.5mtr long with complete all fittings such as nuts & bolts, washers as required, welding and flanges etc, fixed on steel tubular pole/PCC poles including taking down of old unserviceable bracket complete all as specified and directed. | 20 | Each Job | 550 ₹11,000 Lowest | 690 ₹13,800 | 800 ₹16,000 | 800 ₹16,000 |
| 5.00 | M&L for cable junction box with IP 66 protection (halogen free and weather proof) for outdoor installations of size 260 x 210 x 116 mm with terminals including SP, MCB of 6 Amp gland for cable, FI clamp of size 20x3 mm, nuts, bolts, washers, provision of connectors for connection of cables etc complete or all including taking down as specified or directed. | 29 | Each | 1,250 ₹36,250 Lowest | 2,980 ₹86,420 | 3,500 ₹1,01,500 | 2,000 ₹58,000 |
| 6.00 | S&F for PVC insulated and PVC round sheathed, copper conductor (flexible) industrial cable 2.5 sqmm, three core 2 Run and 1.5 sqmm earthing cable in and including through GI tube of light grade of 15mm bore dia for connection of street light on pole / wall from over head conductor / junction box / DB including termination clip etc all as specified including taking down as directed by Engr-in-Charge. | 200 | RM | 180 ₹36,000 | 200 ₹40,000 | 200 ₹40,000 | 95 ₹19,000 Lowest |
| 7.00 | Supply,laying, jointing and testing, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 6 sqmm 2 core laid in trenches/ on wall, ducts, pipes, on poles and connection with necessary cables lugs, glands, suitable for mild steel saddle clips (were cable laid in ceilings/wall without cable duct) nut bolts complete after taking down old unserviceable cable including bricks etc. all as specified and directed.
(Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE). | 50 | RM | 120 ₹6,000 Lowest | 320 ₹16,000 | 120 ₹6,000 Lowest | 135 ₹6,750 |
| 8.00 | Supply,laying, jointing and testing, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 sqmm 4 core laid in trenches/ on wall, ducts, pipes, on poles and connection with necessary cables lugs, glands, suitable for mild steel saddle clips (were cable laid in ceilings/wall without cable duct) nut bolts complete after taking down old unserviceable cable including bricks etc. all as specified and directed.
(Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE). | 600 | RM | 180 ₹1,08,000 Lowest | 280 ₹1,68,000 | 180 ₹1,08,000 Lowest | 285 ₹1,71,000 |
| 9.00 | Supply,laying, jointing and testing, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 4 core laid in trenches/ on wall, ducts, pipes, on poles and connection with necessary cables lugs, glands, suitable for mild steel saddle clips (were cable laid in ceilings/wall without cable duct) nut bolts complete after taking down old unserviceable cable including bricks etc. all as specified and directed.
(Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE). | 400 | RM | 232 ₹92,800 | 320 ₹1,28,000 | 190 ₹76,000 Lowest | 353 ₹1,41,200 |
| 10.00 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm on plan for laying of cable and foundation of poles stays and getting out in any type of soil complete all as specified and directed. | 243 | Cum | 250 ₹60,750 | 384 ₹93,312 | 150 ₹36,450 Lowest | 300 ₹72,900 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
22 Nov 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF PANAGARH
GE AF PANAGARH MES AF STATION PANAGARH PO BIRUDIAH WEST BENGAL 713148
REPAIR/ REPLACEMENT/ MAINTENANCE OF STREET/ PERIMETER LIGHTS AND POLES AND CONNECTED WORKS AT AFS ARJAN SINGH UNDER GE (AF) PANAGARH
2025_MES_737811_1
C/8852/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
AF STATION PANAGARH
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE AF PANAGARH
₹30,000
28 Feb 2026
30 Oct 2025
24 Nov 2025
30 Oct 2025
22 Nov 2025
15 Nov 2025
M&L for 32mm dia street light bracket made out of galvanized iron tubing (medium grade) of 1.5mtr long with complete all fittings such as nuts & bolts, washers as required, welding and flanges etc, fixed on steel tubular pole/PCC poles including taking down of old unserviceable bracket complete all as specified and directed.
M&L for 25mm dia street light bracket made out of galvanized iron tubing (medium grade) of 1.5mtr long with complete all fittings such as nuts & bolts, washers as required, welding and flanges etc, fixed on steel tubular pole/PCC poles including taking down of old unserviceable bracket complete all as specified and directed.
M&L for cable junction box with IP 66 protection (halogen free and weather proof) for outdoor installations of size 260 x 210 x 116 mm with terminals including SP, MCB of 6 Amp gland for cable, FI clamp of size 20x3 mm, nuts, bolts, washers, provision of connectors for connection of cables etc complete or all including taking down as specified or directed.
S&F for PVC insulated and PVC round sheathed, copper conductor (flexible) industrial cable 2.5 sqmm, three core 2 Run and 1.5 sqmm earthing cable in and including through GI tube of light grade of 15mm bore dia for connection of street light on pole / wall from over head conductor / junction box / DB including termination clip etc all as specified including taking down as directed by Engr-in-Charge.
Supply,laying, jointing and testing, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 6 sqmm 2 core laid in trenches/ on wall, ducts, pipes, on poles and connection with necessary cables lugs, glands, suitable for mild steel saddle clips (were cable laid in ceilings/wall without cable duct) nut bolts complete after taking down old unserviceable cable including bricks etc. all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).
Supply,laying, jointing and testing, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 sqmm 4 core laid in trenches/ on wall, ducts, pipes, on poles and connection with necessary cables lugs, glands, suitable for mild steel saddle clips (were cable laid in ceilings/wall without cable duct) nut bolts complete after taking down old unserviceable cable including bricks etc. all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).
Supply,laying, jointing and testing, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 4 core laid in trenches/ on wall, ducts, pipes, on poles and connection with necessary cables lugs, glands, suitable for mild steel saddle clips (were cable laid in ceilings/wall without cable duct) nut bolts complete after taking down old unserviceable cable including bricks etc. all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushioning, concrete cable cover and protection GI pipe shall be measured and paid separately and length of cable shall be one length unless otherwise as directed by GE).
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm on plan for laying of cable and foundation of poles stays and getting out in any type of soil complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness all as specified and directed.
Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed. (Note: Punned thickness of sand shall be measured and paid).
M&L for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mm x 115mm x 75mm, complete all as specified and as directed.
M&L for PCC (1:3:6) (nominal mix) type C-2 (using 20mm graded crushed stone aggregates) as in all around the pole and including necessary formwork complete all as specified and directed.
M&L for PCC (1:2:4) type B2 using 20mm graded for padestal coping incl necessary formwork finished fair using extra cement with two coat of white wash after demolation/breaking of the existing defective/broken coping of any kind of street light complete all as specified and directed.
M&L for boring of holes under road, pavement, hard standing by trenchless technology/manual excavation as necessary including machine, tools etc as per site requirement complete all as specified and directed.
M&L for 40mm dia galvanized steel tubing (light grade) with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connections, check-nuts, caps, plugs, diminishing pieces and flanges etc as in pole, crossing of roads, laid in trenches, fixed on walls for cable protection complete as in repair all as specified and directed.
M&L for steel tubular swaged poles errected to truly vertical position with 6mm thick mild steel base plate of size 300mm x300mm, welded to Pole, B-118 finial taper plug, bolts, nuts and screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II, type 410-SP-22 (8.5m long) including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminum paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint internally and portion embedded in concrete, making five black and white bands at lower portion of pole each 300mm wide at 300mm spacing alternately and marking pole number. with black paint at suitable height including taking down old unserviceable broken steel pole of 9 mtr long complete all as specified and directed. (Note :- Necessary excavation of earth work, removing, returning filling in, PCC foundations of poles, coping etc shall be measured and paid separately)
M&L for preparation of old painted steel surface of LT Poles of height 8.5 / 9 mtrs height of LT OH line or street light steel tubular poles above ground level coping including cross arm channels, flat iron clamp in LT OH line by scrapping with wire brush and applying two coats of aluminium paint including pole numbering complete all as specified and directed by Engineer-in-Charge. (Note:- Numbering of LT/HT Steel tubular poles by writting letters of figures (Block, Roman, Italic or Indian) not exc. 10 cm hight. The numbering to be painted with high quality white paint on black colour base painted surface with round shape of dia 10 cm and cost of the same included in this item.)
M&Lfor preparation of old distempered / white wash / painted RCC Poles upto 11/9 mtrs height of street light poles above ground level incl coping with two coat of existing or as directed distemper including two coat of aluminium paint over iron surfaces such as cross arms, channels, Flat iron clamp, nuts, bolts, washers etc in LT OH line including writing pole numbers with black paint complete all as specified and directed by Engineer-in-Charge. (Note:- Numbering of LT/HT Steel tubular poles by writting letters of figures (Block, Roman, Italic or Indian) not exc. 10 cm hight. The numbering to be painted with high quality white paint on black colour base painted surface with round shape of dia 10 cm and cost of the same included in this item.)
S&F for replacement Astronomical Street Light time Switch alongwith suitable Power Contactor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) conforming to IP54.The Contactor, MCB and Circuit Wiring should suitable enough to take load of 12 kW load equally distributed over 3-phase .Contactor Rating: 40.Amps (4-pole).MCB (4-pole) Rating: 40.Amps (3 nos.) Make : Hager/ Siemens/ Schneider
S&F for LED street light fitting 90 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and after taking down old unserviceable light fittings of any type complete as in repeir all as specified and directed (Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.) (Make:- Crompton, Model No TRP-425-90-57-HL2-LM-NBK or Havells, Cat No ENDURAOMNIPLUSSL90WLED757SASYTOPC or equivalent in Philips (d) Purchase voucher shall be submit at the time of payment claim.)
S&F for LED street light fitting 70 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish, parismatic polycarbonate cover with individual LED lense with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and after taking down old unserviceable light fittings of any type complete as in repeir all as specified and directed. (Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting an
d drivers shall be of same make.) (Make:- Crompton, Model No TRP-421-70-57-SL-LM-NBK or Havells, Cat No ENDURAOMNIPLUSSL70WLED757SASYTOPC or equivalent in Philips (d) Purchase voucher shall be submit at the time of payment claim.)
S&F for LED Driver of existing 30/35/45/60/70 Watt LED Street light/ Security light/Perimeter light fitting as per existing make of LED fitting including Surge protection device (SPD) complete as in repair all as specified and directed.
S&F for LED Driver of existing 90/100/120 Watt LED Street light/Security light/Perimeter light fittings as per existing make of LED fitting including Surge protection device (SPD) complete as in repair all as specified and directed.
S&F for LED Driver of existing 150/200/500 Watt LED Flood light/ Security light/Perimeter light fittings as per existing make of LED fitting including Surge protection device (SPD) complete as in repair all as specified and directed.
M & L for painting of LT panels of any size/dimension by preparation of old painted surfaces, cleaning refixing panel board door with hinges, nut bolts etc removing of existing rust grease oil spot etc. priming with aluminium red-oxide and applying 1st grade of synthetic enamelled spray paint with spary gun (two coat) of approved make brand and colours (includes cost of paint) & foundation and painting names of the distribution location complete all as specified and directed by Engineer-in-Charge.
M&L for writing letters or figures (block, Roman, italic or indian) n exc 10 cm height with high quality white paint without brush marks on black colour base painted surface with round shape of dia 10 cm, if necessary re-painted untill the desired result is obtain complete all as specified and directed.
S& F for LED solar street light fittings 24 W/25 W (all in one) including galvanized octagonl steel pole in built and height of pole 3mtr, top dia of pole 70mm, bottom dia of pole 130mm,sheet thickness 3mm, base plate diamention (200mmx200mmx12mm), bolt size (4x16mm dia), lithium ferro-phosphat battery, solar panel, MPPT solar charge controller with dusk down/PIR sensor etc. complete as in repair all as per manufacturer instruction and as directed by Engineer-in-Charge. (excavation and earth work shall be measured and paid separately) (Make:- Bajaj / Havells / Crompton/ Philips and model approved by GE as per site requirement duly recommended by Engr-in-Charge. Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make. (d) Purchase voucher shall be submit at the time of payment claim.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
TENDER8852.pdf
Tender Documents • 0.93 MB
BOQ_826153.xls
BOQ • 1.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .