Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC HILOI EKDAL PADMABATIPUR TALCHER ANGUL ODISHA 759103 | ANUGUL | ODISHA | 759103 | L1 | Accepted-AOC AWARDED BEING L1 | |
| 2 | L2₹5.1 L+₹63,372.58 (14.2%)Rejected-Finance | L2 | Rejected-Finance REJECTED NOT BEING L1 | |
| 3 | Rejected-Technical | - | Rejected-Technical ALL BIDS ARE ADMITTED FOR FURTHER EVALUATION |
Tender Value
₹4.8 L
EMD Value
₹6,100
Closing Date
19 Jan 2023, 5:00 pmClosed
STAFF OFFICER CIVIL BHARATPUR AREA
STAFF OFFICER CIVIL BHARATPUR AREA N.S.NAGAR ANGUL ODISHA-759148
Construction of 2 nos deep bore well for supplying water to village pond under CSR scheme at Bharatpur Area (Re-tender).
2023_MCL_266821_1
GM(BA)/SO(C)/e Tender/22-23/856 Dt.06.01.2023
Open Tender
Civil Works - Others
Item Rate
45 days
JAMBUBAHALI VILLAGE
AS PER NIT
3 documents required · 3 mandatory
₹6,100
Yes
10 Mar 2023
9 Jan 2023
23 Jan 2023
9 Jan 2023
19 Jan 2023
9 Jan 2023
9 Jan 2023 - 12 Jan 2023
Amount
Boring/Drilling borewell of required dia for casing/stainer pipe by suitable method perscribed in IS:2800 (Part-I) including collecting samples from different stata, preparing and submitting stata chart/bore log, including hire and running charges of all equipments,tools,plants 7 machineries required for the job,all complete,up to 90 meter depth below ground level-All kinds of soil-200mm dia
Boring/Drilling borewell of required dia for casing/stainer pipe by suitable method perscribed in IS:2800 (Part-I) including collecting samples from different stata,preparing and submitting stata chart/bore log, including hire and running charges of all equipments , tools, plants 7 machineries required for the job,all complete,up to 90 meter depth below ground level-Rocky strata including boulders-200mm dia
Boring/Drilling borewell of required dia for casing/stainer pipe by suitable method perscribed in IS:2800 (Part-I) including collecting samples from different stata,preparing and submitting stata chart/bore log, including hire and running charges of all equipments,tools,plants 7 machineries required for the job,all complete,up to 90 meter depth below ground level-Rocky strata including boulders-150 mm dia
Development of tube well in accordance with IS:2800 (Part I) and IS:11189 , to establish maximum rate of usable water yield without sand content (Beyond permissible limit)with required capacity air compressor,running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method , measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory i/c disinfection of tube well all complete , including hire & labour charges of air compressor , tools & accessrories etc, all as per requirement and direction of EIC.
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia
Providing 2HP single phase 18 stage submersibble pump motor set of approved make (crompton/Texmo or equievalent) having head range 125-36 mtr discharge range 10-95 LPM including control panel 2HP panel, over load system with volt meter & amper meter 2.00 HP all complete as per instruction of EIC.
Lowering & commisioning of 2HP submesrsible pump in the sleep borewell with rigid PVC pipe all accessories etc0.complete including the cost of materials & fitting (Cost of pump, cable rigid PVC pipe,control panel,SS nipple,bore clamp, bore cover to be paid seperately).
Providing 2.5 sqm 3 core wire
Providing & fixing 50mm OD 8kg HDPE pipe
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe,removable as per requirement, all complete for borewell of : 200 mm dia
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tibewell as per IS: 2800 (part I) , including necessary bolts & nuts of required size complete.200 mm clamp.
Providing & fixing 40 mm SS Nipple
Providing & fixing PVC 12mm rope
Total impact of GST for the purpose of CTC
GOPABANDHU PRADHAN
BIRANCHI KUMAR SAHOO
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .