ADDITION / ALTERATION TO SHED NO 23 (SLS) AT 23 ED AT 23 ED AF STN AVADI UNDER GE AVADI

Amount

SCHEDULE 'A' (B/R PORTION):

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets etc of any thickness, including cover fillets complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and directed

Taking down cement plaster on concrete or brick ,stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

Taking down frame exc. 1.5 sqm but n.exc 4 sqm with shutter (withour taking of shutter from the frame) etc complete all as specified and directed

Dismantling wrought iron or mild steel work of any description complete all as specified`and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and pavings exceeding 15 cm but not exceeding 0.30 cm thickness (below or above ground level) including removing debries to a distance exceeding 250m complete all as specified and as directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar of any description including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for non Skid ceramic coloured tiles of 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick bedding layer in cement mortar (1:6)

M&L for coloured glazed ceramic tile of size 300mmx200mmx7mm thick, on walls / vertical such as skirting / dados etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over including 10mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor , finished even and rough to receive the topping layer complete all as spacified and directed.

M&L for roughening surfaces of old concrete floor by picking ,sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified

M&L for Machine cut Kota stone slab flooring 20-25 mm thick laid over and including 20 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping, weathering slighting rounded or chamfered angles and throating including necessary formwork complete all as specified.

M&L for brick work with fly ash bricks using Old size bricks, straight or curved on plan exceeding 6 metre mean radius, built in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces , finished fair and even complete all as specified.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spotsdown and stopping etc and applying one coat of oil bound distemper complete all as specified and as directed

M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots down and stopping etc and applying one coat of cement base paint complete all as specified and directed

S&F Hangers 6 mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3 mm thick , 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified.

S&F Anodised Aluminium snap grid of size 605 mm x 605 mm with anodised aluminium angle of size 25mmx25mm x1.5mm thick and main and cross T of size 40mm x 25mm x 1.5mm thick for false ceiling including conection of supporting hangers complete all as specified and directed .

S&F 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably laced in false ceiling grid made of Aluminium/G.I./M.S. including necessary fastners for fixing of aluminium grid framework complete all as specified

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Valley gutters with self tapping screws complete all as specified and directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer as in roof, wall complete all as specified and directed.

S&F PVC (SWR) pipe of 160mm dia as in rain water pipes , confirming to IS 13592 type 'B' including necessary rubber ring joints fix with velly gutter along wall or cleading complete all as spacified and directed.

S&F 160 mm dia PVC (SWR) bends any radious all as specified and as directed.

S&F mild steel framed work as in doors or ornamental gates made with angle or other section with gusset plates, welded, riveted etc to be prepared for hanging or sliding with hooks including pintal hinges and ground pivot hinges etc, and similar work conforming to Fe 410-W (Gde E-250) quality 'A' complete all as specified and as directed.

S&F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S&F mild steel frame work such as grills , gratings etc with ends of bars shoulderd and / or rivetted or forged into spikes framed guard bars etc confirming to FE 290 Grd E-165 complete all as specified and as directed.

S&F rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410 Grade E-250 quality 'A' complete all as specified and directed.

M&L for preparing new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified

S&F Aluminium rebated Mortice Lock vertical type of 100mm size four Lever complete all as specified

S&F Aluminum (Die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851mm to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed

S&F 150mm long floor door stopper Aluminium alloy body and tongue,anodised,with hard drawn steel spring fixed in floor

S&F 12 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed complete all as specified and directed

S&F 5.5 mm thick sheet glass ordinary quality and glazing with aluminum beading,area of each pane exceeding 0.5 sqm complete all as specified and as directed.

Taking up or down steel / iron tube of 15mm bore and connections including cleaning for refixing or removal to store complete all as specified.

S&F GI tube 15mm bore medium grade including all fittings fixed to walls complete all as specified.

Taking up or down steel / iron tube of 20 mm bore and connections including cleaning for refixing or removal to store complete all as specified.

S&F GI tube 20mm bore medium grade including all fittings fixed to walls complete all as specified.

S&F in repairs Vitreous china squatting pan of 'Orissa' pattern of size 580 mm x 440mm white with "integral foot rests, complete including provision of lime concrete bedding complete all as specified and directed.

S&F in repairs Vitreous china water closet pan (pedestal pattern), white including fixing bolts, plastic water closet seat, black / white colour ,closed pattern with flat bottom and cover with mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs PVC valve less flushing cistern syphonic action type, low level, inlet, ball valve, float & handle of 10 litres capacity including brackets, flush pipe and all accessories complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel sheet 1mm thick for kitchen fixed with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair vitreous china wash basin , white , flat back , of size 550 mm x 400 mm excluding supply of taps, but including waste fittings , brass chromium plated for glazed basins etc. with long screw shanks and flt nuts , flange end embedded in red lead cement and other end fixed , chain and plug and porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand , making connections to waste and supply pipes and complete all as specified and directed

S&F in repair for bib taps, cromimum plated cast copper alloy, screwed down, screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair 15mm dia chromium plated pillar taps, cast copper alloy with capstan heads screwed down high pressure, with or without lettered 'Hot' of cold with long screed shanks and fly nuts screwed for iron pipe and fixed with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair for Stop valves/ angle valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified.

S&F in repairs plastic water closet seat cover, black or white colour closed pattern with flat bottom and cover and mild steel chromium plated hinging device.

S&F in repair Vitreous China bowl type urinal flat back of size of 465mm x 355 mm x 265 mm (minimum) white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 500 litres capacity three layered ,confiring to IS specification complete all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tank ( cylindrical vertical with closed top) hoisted and fixed in position of 1000 litres capacity three layered ,confiring to IS specification complete all as specified and directed.

S&F in repairs 20mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms)

S&F in repairs 32mm dia waste fittings brass chromium plated for glazed wash basins, sink etc with long screwed shanks and fly nuts, flanged end, bedded in red lead cement complete all as directed.

S&F PVC connection 15 mm size with PTMT nut of length 300 mm long complete all as specified

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F in repair PVC (SWR) pipes in any length with or without ears, with rubber ring joints 75mm dia fixed to walls complete all as directed.

S&F in repair PVC (SWR) pipes in any length with or without ears, with rubber ring joints 110mm dia fixed to walls complete all as directed.

S&F in repairs PVC (SWR) bends any radius 75mm bore.

S&F in repairs PVC (SWR) bends any radius 110mm bore.

S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement of diameter of outlet 75mm dia complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia D type, 60cm long between flanges with brackets complete all as directed . .

S&F in repair 20 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as spacified and directed

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing complete laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:4) for laying floors, steps, window cills, cooking platforms etc. complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawings as specified in SSR part II 2020

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Paneling plain colour PVC sheet to be fitted in MS frame welded/sealed to the stile & rails with suitable PVC sheet beading as per specification & shown on drawing in SSR part II of 2020 including stainless steel hinges 100 mm size – 3 Nos for each shutter complete all as specified.

S&F aluminium handle 100 mm cast type anodized

S&F aluminium anodized tower bolt 100mm size

S&F installation of high performance industrial roof vent of 600 mm dia neck of aluminium alloy designed to meet ASS-2428 dated 28 Jan 93 to wind speed of 200 Km/hr and to the entry of wind driven rain at a range of 2.5 litre per second inclusive of base plate and including all accessories complete all as specified and as directed

SCHEDULE 'A' (E/M PORTION - INTERNAL ELECTRIFICATION )

Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) PVC insulated,FRLSH unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit 25mm dia and its accessories concealed including cutting/chases in wall /ceiling / fixed to roof /truss/columns etc incl factory made galvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing of modular switches and sockets, regulators etc., of suitable size modules and the earth wire to be connected to common earth dolly of 1.5 sqmm PVC copper conductor complete all as specified and directed for the following:-

One light point controlled by one switch.

One Ceiling/Exhaust fan point controlled by one switch.

One wall mounted fan point controlled by one switch.

One 3 pin 5 amps socket point on same board

One 3 pin 5 amps socket point on independent board

M&L for Point wiring complete all a specifed with 1100 Volts grade 4 sq mm single core PVC insulated FRLS cable 1100 volts with multi stranded copper conductor conforming to IS 694 1990 with ISI marked (for phase, neutral and earth) in and including non-metallic rigid PVC conduit medium grade ISI Mark of minimum size 20mm dia all accessories concealed including factory made branded make embossed galvanised steel pressed terminal boxes for fixing modular sockets of suitable size modules and the earth wire to be connected to common earthy dolly for one three pin modular switch socket 16 Amps outlet on independent board complete all as specified and as directed

S&F Modular switch 1 way 6A, 1 module complete all as specified.

S&F Modular switch 1 way16A, 1 module complete all as specified

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified.

S&F Modular Socket, 6A/16A - 2/3 pin combined 2 module complete all as specified

S&F Modular type electronic fan regulator, 2 module type complete all as specified

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified.

Taking down carefully the existing power / sub main wirings with PVC aluminum conductor cables in PVC / steel conduits / TW battens up to 2 runs of 6 Sq.mm removing materials from site, taken as credit , making good the disturbed surfaces complete all as specified and as directed.

M&L for wiring for circuit / power /sub main wire with two runs of single core 4 Sqmm size and one run of 4 Sqmm (green colour as earth continuity conductor) PVC insulated, unsheathed, multi stranded copper conductor FRLSH cable drawn through including suitable dia PVC conduit concealed in wall and fixing arrangement on ceiling/trusses with suitable clamps,screws etc complete with accessories all as specified.

M&L for wiring for circuit / power /sub main wire with two runs of single core 6 Sqmm size and one run of 6 Sqmm (green colour as earth continuity conductor) PVC insulated, unsheathed, multi stranded copper conductor FRLSH cable drawn through including suitable dia PVC conduit concealed in wall and fixing arrangement on ceiling / trusses with suitable clamps,screws etc complete with accessories all as specified.

M&L for wiring for circuit / power /sub main wire with two runs of single core 10 Sqmm size and one run of 10 Sqmm (green colour as earth continuity conductor) PVC insulated, unsheathed, multi stranded copper conductor FRLSH cable drawn through including suitable dia PVC conduit concealed in wall and fixing arrangement on ceiling/trusses with suitable clamps,screws etc complete with accessories all as specified.

S&F Load line vertical distribution Board, TPN 4 way double door, fixed on wall semi flush, loadline DB fitted with Bus bars, neutral links, blanking plates, including provision for incommer MCCB 125/160 Amps,TP and for outgoing MCB 40 /63Amps,SP/DP/TPN with all accessories suitable for DB including taking down old unserviceable DB all as specified and as directed. Note : Incoming MCCB and Out going MCBs shall be measured and paid seperately under relevent items.

S&F MCB DB SPN 12 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB shall be measured and paid seperately under relevent items.

S&F MCB DB SPN 8 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB shall be measured and paid seperately under relevent items.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 63 Amps, in the MCB DB Complete with connection testing and commissioning complete all as specified.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 Amps, in the MCB DB Complete with connection testing and commissioning complete all as specified.

S&F MCCB 4 Pole, 415 V, Adjustable type, 125 Amps with breaking capacity 25 KA complete all as specified.

S&F Surface and wall mounted LED tube light fitting, 20 W, batten type, extruded channel thermally conductive material, integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz with and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed.

S&F LED panel light 30/32 watt (2 x2 ),white powder coated CRCA full glow recess mounting LED Backlit Panel, integrated electronic driver complete including connection from ceiling rose to light fitting with twin core cable 23/0.0076 Sqmm complete all as directed.

S&F LED energy saving High bay light fitting for capacity 150 watt, IP66 with high efficancy integrated electronic driver complete, additional safety chain including connection to light fitting with suitable size of connection cable complete with suitbale fixing arrangements of trusses controlled by one suitable MCB complete all as directed.

S&F Flood light luminaries LED energy saving 100 Watt LED exlusive innovative designed, long life versatile pressure die-cast aluminium IP 65 flood light luminaire high power LED in single peace deep drawn housing complete with all accessories and glass cover with suitable bracket or with grouted spring pressure fasterner/steel rawal plugs as directed including connection from juction box to lilght fittings with 2.5 Sqmm 2 single core PVC insulated and unsheathed, multi stranded FRLS copper conductor cable drawn in flexible conduit complete controlled by MCB complete all as specified.

S&F LED building security light fitting 30W made up of pressure die cast housing with toughened glass and individual high power LEDs complete pre-wired and connecting up with suitable twin core flexble copper wire including provision of necessary GI tubing medium grade 25 mm bore of pipe 1.5 m bent to shape with necessary clamps made out of mild steel, nuts and bolts etc.and fixing the fitting to buildings complete all as specified and as directed.

Taking down unserviceable ceiling fan from buildings of any location at site and re-fixing same in position with and including duly rectifying the defects by replacing of ball bearing, oiling / greasing,winding etc and making the fan serviceable and including spray painting and writing MES No on fan complete all as specified and as directed by Engineer in Charge.

S&F ceiling fan BLDC type complete with accessories 230 V,1400 mm sweep BEE 5 star rated with and including provision for necesary hanging hook on ceiling complete all as specified and directed.

S&F Exhaust fan, heavy duty, 450 mm sweep, 1370 RPM, with louvers, metal body conforming to IS, AC single phase, 240 Volts, 50 Hz and connecting including provision of two way PVC connectors, 1.50 sqmm flexible three core multistranded copper conductor cable from ceiling rose or connector to fan including earthing and fixing and making hole in wall of suitable size and finishing the opening and disturbed surfaces to match with existing surface complete all as specified and as directed.

S&F wall mounted fans 450 mm sweep PVC blades 230 volts single phase oscillating suitable for wall mounting complete all as specifed and directed.

M&L for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as required with 4 mm dia galvanized steel wire all as specified and directed

M&L for Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Schedule Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.

S&F in replacement of LED light fitting 1x16/20 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all as specified.

S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 240V complete all as specified.

M&L for wiring for circuit sub main wire with two runs of single core 1.5 Sqmm size and one run of 1.5 Sqmm (green colour as earth continuity conductor) PVC insulated, unsheathed, multi stranded copper conductor FRLSH cable drawn through including suitable dia Steel conduit surface type with all fixing arrangement on wall/ceiling/trusses with suitable clamps,screws etc complete with accessories all as specified.

SCHEDULE 'A' (E/M PORTION - EXTERNAL ELECTRIC SUPPLY )

Supply, laying and testing XLPE cable insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core complete all as specified and directed.

S&F MCCB FP 160 Amps,415V,25KA complete with necessary fixing arangements in existing panel with necessary works complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out any type of soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and all as directed.

Returning filling in soil including spreading levelling watering well ramming in layers not exceeding 25 cm each complete all as specified and directed.

M&L for fine seived excavated dry soil laid to the required width of trench at botom and top of cable as cushioning to cable complete all as specified . Note :- Thickness shall be measured after punning

Supply and laying of common burnt clay building bricks, sub class B size for cable protection all as specified and as directed.

M&L for GI tubing light grade 50 mm for cable protection laid in trenches as in road crossing or fixed to wall /Pole complete all as specified and as directed.

M&L for Cutting the existing road/path of any description for laying of GI tubing and making good the disturbed surfaces of road/ path with and including provision of plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed.

prabhakaran (BID ID -3234613)

srilakshmi industries (BID ID -3234436)

PSK Enterprises (BID ID -3240164)

SRI LAKSHMI ASSOCIATES (BID ID -3234881)