Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.8 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹43.2 L+₹1.4 L (3.44%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹43.4 L+₹1.6 L (3.80%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹43.6 L+₹1.8 L (4.42%)Rejected-AOC | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹44.3 L+₹2.5 L (6.05%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
₹37.5 L
EMD Value
₹74,900
Closing Date
7 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS PIN-913867 C/O 99 APO
SPL REPAIR TO BLDG NO P-207 AT KALIMPONG UNDER GE 867 EWS
2022_MES_563792_2
GE/867/TOKEN/45 OF 2022-2023
Open Tender
Civil Works
Item Wise
180 days
KALIMPONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹74,900
7 Mar 2023
21 Dec 2022
9 Jan 2023
21 Dec 2022
7 Jan 2023
29 Dec 2022
21 Dec 2022 - 27 Dec 2022
Amount
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) or fixed with adhesive make :"Sika"complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick backing plaster in cement mortar (1:4) or fixed with adhesive make :"Sika" complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L glazed ceramic tile in vertical surface of size 350x250x7mm / 450x300x7mm set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface, including 15mm thick bedding layer in cement motor (1:4) comple all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, laid over and including 20 mm thick screed bed in cement mortar (1:6) , all as specified and directed by Engr-in-charge.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar , including rubbing polishing complete laid over cement screed and jointed , 15 mm thick rendering in cement mortar 1:4 including , all as specified and directed by Engr-in-charge.
Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level.
M&L for 50 mm thick PCC (1:3:6) type C2 using 40mm graded stone agg as in plinth protection /path to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement complete all as specifiedand directed by Engr- in-charge .
M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.
M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
Add or deduct for each 25 mm inner girth or part thereof over or under 30cm, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed.
M&L for Reinforced cement concrete, type B-1, (1:2:4) (20mm graded stone agg) cast in situ for Chajjas, complete all as specified and as directed.
M&L for Reinforced cement concrete, type B-1, (1:2:4) (20mm graded stone agg) cast in situ for Beams, cantilevers, bressumm ers, lintels over 1.5m span , complete all as specified and as directed.
Use & Waste of Formwork to chullah hoods, chajjas, troughs and similar items in including edges rough finished surfaces as flat surface, complete all as specified and directed.
Use & Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, including rough finished surfaces as flat surface, complete all as specified and directed.
S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
S&F of TMT bars 6 mm to 8 mm dia, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L for brick wok with sub class `B' bricks straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified and directed.
M&L for pre-cast cement concrete (1:3:6) type C1, using 20mm graded stone aggregates as in block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:6), complete all as specified and directed
M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete sur face, rendering finished fair and even (without using extra cement) complete complete all as specified and directed.
M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.
Supply only integral water proofing compond all as specified and as directed.
M&L for rendering 10mm thick cement Plaster in CM(1:3) on concrete surface as in ceiling/chajja and rainforced cement concrect surfaces
M&L preparation of new plastered or unplastered surfaces of walls, applying 3mm thick wall care putty on wall and applying two coats of oil emulsion distemper over a coat of primer coat Chalk whiting, on plastered surfaces, prepara-tory to distempering on walls complete all as specified and directed.
M&L for complete removal of existing treatment on walls and applying 3mm thick wall care putty on wall and applying two coats of oil emulsion distemper over a coat of primer coat Chalk whiting, on plastered surfaces, prepara-tory to distempering on walls, all as specified and directed.
M&L for preparation on newly plastered / previously untreated surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
M&L scrapping of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed.
M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
M&L for preparation of old surfaces apply one coat of white wash on ceiling complete all as specified and directed.
M&L preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash as in wall complete all as specified and directed.
M&L preparation of old plastered or unplastered surfaces of walls,and applying two coats of oil emulsion distemper over a coat of primer coat Chalk whiting, on plastered surfaces, prepara-tory to distempering on walls complete all as specified and directed.
M&L for preparation on old plastered / previously untreated surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.
Dismantling structural steel work in?cluding doors, gates but excluding framed truss etc
S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillet complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.
Dismantling timber fillets, rails, posts rafters purlins etc under 40 Sqcm in section fixed in any position (unframed work) complete all as specified and directed.
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240
S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
S&F PVC insulation panel with EPS stuck 1 mm printed PVC sheet used in lieu of plain PVC sheet sheet suitably placed in existing/ new false ceiling grid made of G.I with thickness of PVC insulation panel 10 mm complete all as specified and as directed. Note:- New false ceiling grid of GI if provided shall be measured and paid separately.
Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.
S&F pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.
M/L for 35 mm thick second class hard wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers on both faces supplied and fitted to chowkats complete all as specified and directed.
S&F 30 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)
S&F galvanised mild steel wire mesh cloth, 0.56mm nominal dia of wire band average width of aperature 1.18mm and fixed tinned tacks, or galvanised wire stappels chowkhat complete all as specified and directed.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed.
S & F Steel windows or ventilators, fixed type, with glazing bars , complete complete all as specified and directed.
S& F Framed work for hot rolled square 12 mm steel bars such as framed guard bars; grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed
M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts , coping, filling in pressed steel chowkat or similar work including necessary form work as required complete all as specified and directed.
S&F MS work as in hold fast, wall ties, hooks for hanging fans, bands, straps, supports or stay for rain water pipes, plain angle, cleats and similar small articles quality conforming to Fe-410-0 or Fe-310-0 with and including screws, bolts, nuts, washers all as required complete all as specified and directed.
S&F solid PVC door frame size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, S & F in opening as per specification & drawing.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.
S & F 150mm long aluminium anodised barrel tower bolts of extruded sections.
S & F 150mm long aluminium handle cost type anodised
S&F 75 mm long SS butt hinges medium weight cold rolled.
S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.
S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.
Hacking out old broken glass , exc 1.5 sqm, (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of old wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L preparation of Old steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint , complete all as specified and directed.
Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/100/110 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.
S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F of 110mm bore PVC (SWR) Vent cowl complete all as specified and directed by Engr - In- Charge.
S&F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S&F of 110 X 75 mm bore PVC (SWR) reducer including jointing with solvent cement complete all as specified and directed.
S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.
S & F of 110mm bore PVC (SWR) bends complete all as specified and directed by Engr - In- Charge.
S & F of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr - In- Charge.
S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and directed.
S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms)
Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings and removal from site complete all as specified and directed.
M & l for Cutting chases, pinning in Stone, concrete block or slab wall, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
S&F for GI tubes medium grade, 15mm bore, with all fittings, fixed to walls, ceiling or laid in floors including taking up or down steel tubing and connections, cleaning for refixing or removal to store etc complete all as specified and directed.
S&F in repair 15 mm bore stop valve fancy type, chromium plated with long shank and cup, screwed both ends for iron pipe or for unions complete all as specified and directed
S&F in repairs, bib taps, 15mm, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed comple all as specified and directed.
S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F in repair of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.
S&F in repair of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.
S & F in repair Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets
S&F for pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F 32 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgf / sq.cm complete all as specified and directed
S&F 32 mm dia waste cupling of PTMT ( half or full threaded) ( Minimum weight 32 mm -45 gms/ 40mm - 60 gms) fixed in repairs complete all as specified and directed
S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.
S & F in rapair brass chromium plated shower rose 125mm size with or without swivel joints any size, including fixing to steel pipe or union, all as specified or directed by engr - in - charge.
S& F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
S & F SWG gully trap size 150 x 150 mm square or round mounted type ‘S’, setting and jointed with solvent cement complete all as specified.
S&F in repairs vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F for flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern
S&F for Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like second class hard wood, including all necessary' labours; articles n exc 200 cu. cm each, all as specified and directed by Engr- In-Charge.
M & L for screed bed or bedding layer in Cement Mortar (1:6) of 20mm thick for laying floor finishes complete all as specified and directed by Engr - in- Charge.
M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry complete all as specified and directed by Engr - in - Charge.
S & F 180mm dia half round PVC ( heavy grade) eaves gutter made of PRINCE or equivalent company, fixed with MS brackets complete all as directed by Enbgr - in - Charge.
S & F PVC (SWR) Short stop end, for Running Outlet at the end with 01 clamp , Suitable for 180mm half round eaves gutter, made of PRINCE completed all as specifed.
S & F PVC (SWR) junction single, (Single T) equal equal, Running Outlet or unequal Suitable for 180mm eaves gutter, top portion half round and bottom portion to fit to 110mm bore PVC pipe all as specified and directed by Engr - In- Charge.
S & F PVC decorative eaves boards 12 mm thick and 23 cm Wide fitted with flat iron 25x3mm brackets @ 0.90m c/c complete all as specifeid and directed by Engr- In Charge.
S & F PVC (SWR) Joint Bracket, Running Outlet with 02 clamp or unequal Suitable for 180mm eaves gutter, top portion 180mm half round and bottom portion to fit to 110mm bore PVC (SWR) pipe complete all as specified and directed.
S & F PVC (SWR) 90 degree Elbow without outlet with 02 clamp , equal or unequal Suitable for 180mm eaves gutter, top portion half round complete all as specified and directed.
S & F PVC (SWR) 90 degree Elbow with outlet with 02 clamp , equal or unequal Suitable for 180mm eaves gutter top portion half round and bottom portion to fit to 110mm bore PVC (SWR) pipe complete all as specified and directed.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soilcomplete all as specified and directed Engineer-in-Charge.
Removing excavated materials n exc. 50m and depositing where directed at alevel n. exc. 1.5 m above the starting point complete all as specified and directed.
Returning filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil.
M&L for Brickwork with with locally availaible best quality subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed Engineer-in-Charge.
M & L RCC (1:2:4) type B1 ( using 20mm stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed Engineer-in-Charge.
M&L 10 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) on fair face of brick work finished even and smooth mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.
PVC (SWR) pipes single socketed 110mm, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed Engineer-in-Charge.
M & L Cement concrete in (1:4:8) Type D2( 40mm graded aggregte) in foundations, filling and mass concrete complete all as specified and directed Engineer-in-Charge.
M & L Providing precast cement concrete Type B1 (1:2:4) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces
M & L Concrete bed in PCC (1:4:8) type D2 (using 40mm stone aggregate) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested
Taking down copper/aluminium point wiring (light fan, Socket or power ) Complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. as directed by the Engineer – in - Charge.
Disconnection and taking down distribution boards, switch fuse unit, , enclosure for MCB including MCB's of any type and size and keeping aside for reuse of serviceable one.
Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size, medium grade with all necessary fittings, concealed wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.
All as per item No 131 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board.
All as per item No 131 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size.
All as per item No 131 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.
Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.
Supply & Fixing Bell, AC 230 Volts single pole including mounting block all as specified and as directed.
Supply & fixing Bell push flush type, 5 Amps button.
Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.
Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type all as specified and as directed.
Supply and fixing switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type universal all as specified and as directed.
S & F Energy efficient LED tube light fitting 4", 1x18 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 2000lm, extruded aluminium housing with high quality Polycabonate diffuser, wide voltage protection range 140V-270V including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge. Make : Philips, Model - TMC 501, TMC 501P 1XT-LED 22W P3241 or equivalent in Crompton/Havells.
Supply, Fixing, Testing & Commsioning of IP66 & IK09 integral LED Bulk Head luminaire with housing made of Pressure Die Cast alumunium & Optical cover made of Opal Polycarbonate for glare free lighting . System Lumen Output of minimum 600 lumens. Power Consumption should not exceed 10W (Including Driver Loss). For Glare free lighting luminaire should be with Opal diffused Polycarbonate. Make : Philips, Cat part No. "WT 202W LED 6S CW PSU S2 PC", Color temperature 6500 K, CRI >80, Housing - High pressure die cast aluminum, Mounting - Surface, THD < 20%, PF >0.9, Operating voltage range 120V-277V AC. Submission of LM80-08 for LED source & LM79-08 for Luminaire from third NABL Accredited Lab / UL mandatory including connecting up with 3.0 core, 0.5 sqmm copper conductor sheathed as specified and directed.
Supply and fixing wall mounted LED luminare, 1x 10 watts with glass shed, prewired with holder, including one 10 watts LED lamp, Modle Endura Rugby New 10W Cat No- LHEOAOP7PZ6W010 Make- Havells or equivalent model of Philips/Bajaj / Crompton.
Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and as directed.
S & F in LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 5 W complete with tube rod all as directed.
Supply and fixing Sheet metal enclosure for MCCB TPN DB’s, Phosphatised Powder Painted Double door 200 amp rated, Triple pole and neutral link of 4 way 415 volt AC complete all all as specified and directed by Engr-in-Charge . Make- Legrand/Siemens/Schindler.
Supply and fix MCCB, Tripple Pole & Neutral, 63 Amps, 415 volts, 50 Hz, 16kA complete all as specified and directed by Engr-in-Charge. Make- Legrand, Siemens, Schinder, Havells.
Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC. Make- Legrand/Siemens/Schindler.
Supply and fixing MCB Single pole and neutral upto 40 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, Cat part no 4086 17 of Legrand or equivalent in Siemens/Schindler.
Supply and fix MCB/Isolator single pole (SP), 10 kA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, Cat part no 4085 87,90,92,93,94,95 of Legrand or equivalent in Siemens/Schinder.
M&L for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated FRLS cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall.(Note Two run of 6 Sqmm and one run of 6 Sqmm wire including one run of 25 mm dia cunduite shall be measured as one unit length including taking down of old servicible sub main wiring.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1 : 3 : 6) type C-1 , 50 mm thick pre cast RCC (1 : 2 : 4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.
M&L for making hole in the existing wall/building without distrubing to existing infrastructure for fixing of exhaust fan complete including making good to match with the existing specification complete all as directed by Engineer-in-Charge.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete.
M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall.(Note Three run of 4 Sqmm including one run of 25 mm dia conduite shall be measured as one unit length including taking down of old servicible sub main wiring.
Taking down 25mm bore steel tubing and connections with all fittings including cleaning for refixing or removal from site.
Taking down 20mm bore steel tubing and connections with all fittings including cleaning for refixing or removal from site.
Refixing/relaying old steel tubing including GI fittings wherever required in new or old position of 25mm bore complete all as specified and directed.
Refixing/relaying old steel tubing including GI fittings wherever required in new or old position of 20mm bore complete all as specified and directed.
Supply and laying testing steel water tubing medium grade with all fitting fixed to wall/ceiling or laid in floor of size 25 mm bore. Make : TATA/Jindal/Bansal.
Supply and laying and testing steel water tubing medium grade with all fitting laid in fixed to wall/ceiling or floor of size 20 mm bore. Make : TATA/Jindal/Bansal.
Supply and fixing Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position with all fitting such as tank nipple and locking arrangement all as specified in SSR Part-I of capacity 1000 ltr including S&F brass valves with polythene float and fly nut complete scerwed for iron pipe of brass ferrule and fixed of size 25 mm.
Supply and fixing gun metal globe valve iron wheel screwed both end for iron pipe fixed all directed of size 20 mm. Make : Zoloto or ISI marked.
Supply and fixing gun metal globe valve iron wheel screwed both end for iron pipe fixed all directed of size 25 mm. Make : Zoloto or ISI marked.
M&L compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc conforming to Fe 410-w (Fde - E- 250) Quality A & painting with two coat of black bitiminious paint over a coat of Red Oxide primer complete all as specified by Engr-in-Charge.
M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating, as directed and necessary form work complete all as specified and directed.
M&L 15 mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete surfaces, rendering finished even and smooth (without using extra cement complete all as directed.
M&L for providing precast cement concrete solid block over 10 cm in width and setting in mortar (1:4) using pre cast cement concrete block (1:3:6) type C1 using 20 mm graded stone agg all as specified and directed.
M&L for Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
DEDUCTED AMOUNT OF SCHEDULE OF CREDIT
MANOJ JINDAL
SANJAY MITTAL
HEM RAJ GURUNG
MS MAYA PRAKASH GOEL AND SONS
PRASAD PRADHAN AND SON
DEEP CHANDRA JOSHI
RAJU TAMANG
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .