REPAIR/ REPLACEMENT OF ROUTINE MAINTENANCE E/M WORKS, INTERNAL WIRING, DBs, MCBs INCLUDING E/M FITTING/ FIXTURES REPAIR/ REPLACEMENT OF OLD DETERIORATED STREET LIGHT POLE AND GARDEN LIGHT, STREET LIGHT WITH DECORATIVE LIGHTS IN VISAKHA VANDANA COMPL

Amount

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc to be measured separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified.

Material and Labour for concealed point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular Cover plate concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :-

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

(f) One bell point controlled by one bell push 5 Amps.

Material and Labour for point wiring complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular Cover plate concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to common earth as earth dolly.

Supply and fixing in repair Modular Switch, 6Amp, One way, 1 module.

Supply and fixing in repair Modular blank plate, One way, 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fixing in repair Modular Switch, 16Amp, One way, 1 module.

Supply and fixing in repair Modular type bell push , 6Amp, 1 module.

Supply and fixing in repair Bell electric AC 230Volt single pole musical type with ISI mark.

Supply and fixing in repair Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module

Supply and fixing in repair ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified. Make - Legrand /Gold Medal / Anchor

Supply and fixing in repair Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module.

Supply and fixing in repair Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module.

M & L required for filling wall cavity & cutting chases in cement mortar 1:3 not exc 10 cm in girth to ends or edges including taking down existing metal or wooden sinking box & making good to wall surface for concealed modular metal flush box or concealed conduit wiring, etc

Supply and fixing in repair Modular white cover plate with Frame 1 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular white cover plate with Frame 2 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular white cover plate with Frame 3 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular white cover plate with Frame 4 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular white cover plate with Frame 6 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular white cover plate with Frame 8 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular white cover plate with Frame 12 Module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular metal flush box 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular metal flush box 2 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular metal flush box 3 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular metal flush box 4 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular metal flush box 6 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular metal flush box 8 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Modular metal flush box 12 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixing in repair Linear Aluminium Batten LED T/L 20W (min 110 lumen/watt) Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and fix in repair Linear Aluminium Baten LED T/L 20W (min 110 lumen/watt) Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light (Warm White) complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and fixing in repair Linear Aluminium Baten LED T/L 10W (min 110 lumen/watt) Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and fixing batten intergrated LED channel 1x12 WH, flexible neck for adjusting beam, bronze finish for superior feel, 3000K with warm white (Color rendering CRI>8) complete accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair Linear Aluminium Batten, inbuilt sensor based on smart LED auto dimmable from 100% of rated wattage to 30% on sensing of movement/occupancy, batten 20W (min 110 lumen/watt) Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and fixing in repair Linear Aluminium Baten, inbuilt sensor based on smart LED auto dimmable from 100% of rated wattage to 30% on sensing of movement/occupancy, batten 10W (min 110 lumen/watt) Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Material and Labour in repair for Lamp holder, PVC /Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by Engineer-in-Charge.

Supply and fixing in repair LED lamp of 14 watts (min 110 lumen/watt), 240 volts, single phase, 50 Hzs, Lumen 1450 AC supply complete all as directed by Engineer-in-Charge.

Supply and fixing in repair LED lamp of 14 watts (min 110 lumen/watt), 240 volts, single phase, 50 Hzs, Lumen 1450 AC supply (Warm White) complete all as directed by Engineer-in-Charge.

Supply and fixing in repair Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners complete all as directed by Engineer-in-Charge.

Material & labour for Earthing with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, burried directely in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip32 x 6 mm with the help of bolts, nuts, and washers of galvanised iron or steel, including necessary excavation, PCC 1:3:6 type C2 and PCC cover 1:2:4 type B1 watering arrangement with GI pipe funnel, jali, complete all as specified and shown in electrical plate No. 5 of SSR Pt-1, including testing on completion.

Material & labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or burried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm galvanised iron strip.

Supply and fixing in repair sheet metal enclosure 12 way Double door type having protection IP-54, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :-

(a) MCB SPN 63 Amps, 240 Volts - 01 No

(b) MCB SP 6-32 Amps, 240 Volts.

Supply and fixing in repair MCB, DB, SPN 8 way double door with protection type IP-54 with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed, as approved comprising following :-

(a) MCB SPN 40 Amps 240 Volts-01 No (C Series).

(b) MCB SP 6- 32 Amps 240 Volts (C Series).

Supply and fix in repair single phase sheet metal powder coated double door distribution board 4 way comprising with following :- (a) MCB SPN 40Amps 240Volts, 10KA - 1 No ('C' Series) (b) MCB SP 6 - 32Amps 240Volts - 2No ('C' Series) Make - Legrand/ Schneider/ GE

Supply and fixing in repairs sheet metal enclosure 2 way without bus bar with MCB comprising following

(a) Isolator DP 63 Amps Breaking capacity 10 KA. (B series) .

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces.

Supply and fixing submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing caping not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping

Supply and fixing submain wiring in repair 2 single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC casing caping / conduit not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. Note :- (i) Two runs of 10 Sqmm cable, 1 run of PVC casing caping/ conduit and 1 run of 10 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping / conduit

Supply and fixing submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sqmm in and including PVC casing caping not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 6 sqmm (green colour) for earthing. Note :- (i) Two runs of 6Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping

Supply and fix in repair 15 Amp plug top with complete accessories all as directed by Engineer-in-chage.

Supply and fixing Recess Mounting LED panel, 2'x2', 34 Watt (min 110 lumen/watt) capacity, white Light, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Grid Ceiling all as specified and directed

Supply and fixing Surface Mounting LED panel, 2'x2', 34 Watt capacity (min 110 lumen/watt) , warm white, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for surface all as specified and directed.

Supply and fixing Recess Mounting LED panel, 1'x1', 34 Watt (min 110 lumen/watt) capacity, warm white, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Grid Ceiling all as specified and directed

Supply and fixing Recess Mounting LED panel, 4'x1', 30 Watt (min 110 lumen/watt) capacity, Warm White environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Grid Ceiling all as specified and directed .

Supply and fixing Recess Mounting LED panel, 4'x1', 36 Watt capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Grid Ceiling all as specified and directed

Supply & fixing in repair MCB DB, TPN 8 way vertical type, 415 V with 200 Amps rated bus bar and double door connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed, comprising of the following : - (a) MCCB 3 Pole, 415 V fixed type, 160 Amps with breaking capacity 25 KA-01 Nos (incoming) (b) MCB TP 63 Amps, 10KA - 06 Nos (C Series) (Outgoing) (c) MCB SP 40 Amps, 10KA - 06 Nos (C Series) (Outgoing)

Supply and fixing Recess Mounting LED down lighter with pressure die cast aluminium heat sink and PC diffuser 24 Watt capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated complete with integrated driver incl all acessories suitable for Armstrong/Grid Ceiling all as specified and directed.

Supply and fixing in repair LED wall bracket Light aesthetically designed wall bracket light with E-27 lamp holder glarefree Light sutiably fixed on the wall all as specified and directed by Engineer-in-Charge.Make-: CAT part No HHW048 08CF RF 02 OF Halonix or technocommercial equivalent.

Supply and fixing in repair LED strip Light with input voltage range 12V DC (with adaptor) Luminous efficiency>100 Lm/W Power 24 Watt, 5 Meter Roll with cut points , 60 LEDs/ Meter, IP 65 Protection (including strip Driver) Note-: Quoted rate should include the LED driver

Supply and fixing Recess Mounting LED panel, 5.5/6 inches dia, 22 Watt (min 110 lumen/watt) Capacity, warm white, environmental friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Grid Ceiling all as specified and directed.

Supply and fixing Recess Mounting LED panel, 10.5/11 inches dia, 30 Watt Capacity (min 110 lumen/watt) , warm white, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Grid Ceiling all as specified and directed .

Supply and fixing Recess Mounting LED panel, COB light, 18 Watt capacity, CRCA housing, white powder coated, with 36 degree beam angle, 3000K CCT complete with acessories all as specified and directed . Make- CAT Part No. 18W Sky Spot COB (CW) of Phillips or technocommercial equivalent.

Supply and fixing Recess Mounting LED down lighter with pressure die cast aluminium heat sink and PC diffuser 24 Watt (min 110 lumen/watt) capacity, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated complete with integrated driver incl all acessories suitable for Armstrong/Grid Ceiling all as specified and directed .

Supply and fixing in repair capacitor 2.5 MFD dry type complete as specified and directed

Supply and installation of mini trunking of size 32mm X 20mm with 1.5mm thickness with all finishing accessories (flexible cover, clip of partition, base joint, internal angle, external angle, end cap, derivation, flat angle) confirming standard EN 50085-2-1. Trunking should accept wiring device with all the funcions by associating the accessory of installation. Trunking should confirm to the current specifications of NF C 68-104 in term of both performance and level of function provided by the system. Installation trunking (which carries electrical/signal/telephone wiring accessories) should be type 3 (installation) in the new stranded. Material should be non flame propagating. Degree of protection provided by enclosure should be IP 40. Protection against mechanical impact should be IK 07. Trunking should be delivered in length of 2 mtr. The trunking cover and partition should be in PVC white RAL 9003. The accessories should be in plastic ABS white RAL.

Supply and Fixing LED FIRENZE wall light E-27 landscape lighting of 27 Watt for decoration purposes with die cast aluminium housiing Glass diffuser Black Colour IP-65 protection mounted on wall with brackets and nuts,bolts,screwed complete etc all as specified and directed by engineer-in-charge. Cat part no-: 330.00.NGG of jaquar or technocommercial equivalent.

Excavating in trenches not exceeding 1.5 Mtrs. wide and not exceeding 1.5 Mtrs. in depth for foundation, laying of cablesetc and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm depth in soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated material (Soil) n.exc 50 m and depositing where directed at a level n. exc 1.5 Mtrs. above the starting point complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Steel tubular swaged street light poles complete with pole arms 1.2 m & cast iron base plate ,finial taper plug,bolts,nuts and screws as specified type 410 SP-31 , 8.5 mtr long and painting with two coat of aluminium paint over one coat of primer on exposed surface of pole including taking down old rusted pole complete all as specified and directed by Engineer-in-Charge. (NOTE- Excavation & PCC will be measured and paid separately)

Supply & fix hot dip galvanized anti corroded weather proof octagonal electric poles 6 mtrs long top mounting on foundation complete with base plate and final including PCC foundation as per manufacturer design with 1500 mm long Arms bracket,tapper plug,bolts nuts and screws incl aluminium painting etc as specified complete all as specified and directed including taking out existing damaged pole with street light bracket complete.

Material & labour for Cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregates), in foundation and mass concrete etc complete all as specified and as directed.

Material & labour for Cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in coping, blocks, bed plates, kerbs etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary formwork as required complete all as specified and directed.

Supply and fixing new generation ruby LED post top series IP 65 LED post-top 35 Watt (min 100 lumen/watt), energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source Clear Cover offers bright illumination for different applications including suitable dia of GI pipe and taking down old post top complete all as specified and directed be Engr in Charge.

Supply and fixing Cone NXG series 8 watt LED Bollard acts as an imposing street furniture with touch of aesthetic innovative design with uniformly lit diffuser at the upper portion acts a beacon of path guidance in a landscape environment with robust IP 65 rating including PCC foundation, nut bolts etc including taking down old unsv bollard complete all as specified and directed by Engr in Charge.

Material & labour for in Repair/replacement coping of existing street light poles complete with PCC 1:2:4 D2 type 20 mm graded stone, painting after PCC work complete all as specified and directed at site by Engr - in- Charge.

Cutting and removing grass, vegetation bushes etc and brooming in side/outside of water supply electric supply installation and removing all rubbish to a distance not exceeding 50 m as directed and cleaning/ brooming in water /electric supply station complete all as specified and directed by Engineer-in-Charge.

Taking down and Checking and repairs to street light fitting from Truss, Highbay light, flood light, Perimeter light, Post Top Lanterns, Obstruction light, Avaition light fittings inside / out side of NT POOL, SASSON COMPLEX , BOAT POOL, TALWAR CAMP, REIVERA & HARBOUR HEIGHTS, DUXBURY, ADITI AHILYA, VISHAKHA , VANDNA AND FOMA HOUSE ,INS SHIKRA, REVIERA fitting any height street light pole (7/9/11) mtrs, hanger, truss, wall repair and checking and cleaning internal complete wiring, bulb, ignator, holder, rectifying the defects and removing of burnt cable if any including repair/replacing the unserviceable items as mentioned in below items (wherever necessary) and testing the same on ground at site for its serviceability and refixing the same at original place/location complete all as specified and directed by Engineer-in-Charge. Note :- (a) If the contractor have not given job card to his tradesman in any working day and have not attended any complaint , the necessory recovery of Rs. 500/- per day shall be imposed by Engineer-in-charge . (b) Routine check shall be done for all types of non opps street / secutity light fitting in each and every location in routine wise manner every day by tradesman. (c) Driver/MCBs shall be measured paid and separately

Supply only LED driver for street light / highbay light fitting / flood light from 45 watt to 250 Watt 230 volt of any type and size etc to match with existing complete all as specified and directed by Engineer-in-Charge.

Supply only MCB, SPN 40/63 Amps 10 KA capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed by Engineer-in-Charge.

Supply only of MCB SP 6-32 Amps, 240 Volts complete all as specified and directed by Engineer-in-Charge.

Supply only MCB , TPN 40-100 Amps capacity, C Curve type suitable for 240 volts AC supply short circuit protection and rupturing capacity not less than 10 KA including making connection complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Attending Faults/Trippings and rectifying /repairing the faults in street light panel/ Junction box/ cable fault/ connection/ busbar including PVC insulating Tapes/Nut bolts/lugs and all as specified and directed by Engineer-In-Charge. Note : Damaged/Burnt MCCB/MCB/cable/chageover switch will be measured and paid separately)

Supply only MCCB,4Pole,250 Amps,25kA, 415Volts,50Hz AC including taking down old MCCB complete all as specified and directed by Engr-in-charge.

Supply only MCCB,4Pole,160 Amps,25kA, 415Volts,50Hz AC including taking down old MCCB complete all as specified and directed by Engr-in-charge.

Supply only MCCB,4Pole,100 Amps,25kA, 415Volts,50Hz AC including taking down old MCCB complete all as specified and directed by Engr-in-charge.

Supply only MCCB,4Pole,63 Amps,25kA, 415Volts,50Hz AC including taking down old MCCB complete all as specified and directed by Engr-in-charge.

Supply only Change Over Switch, 4Pole, 63 Amps, Open Execution,ON LOAD type 415Volts,50Hz AC including taking down old changeover switch complete all as specified and directed by Engr-in-charge.

Supply only Change Over Switch, 4Pole, 100 Amps, Open Execution,ON LOAD type 415Volts,50Hz AC including taking down old changeover switch complete all as specified and directed by Engr-in-charge.

Supply only Change Over Switch, 4Pole, 250 Amps, Open Execution,ON LOAD type 415Volts,50Hz AC including taking down old changeover switch complete all as specified and directed by Engr-in-charge.

Supply & fixing in replacement of Industrial highbay integral LED fittings of capacity 120 watt complete and all accessories at top of any height of workshop hanger including proper hanging fixing with angle/round bar flat iron with clamping as good appearance including taking down old light complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement of Industrial highbay integral LED fittings of capacity 150 watt complete and all accessories at top of any height of workshop hanger including proper hanging fixing with angle/rond bar flat iron with clamping as good appearance complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 250 Watt LED flood light with high performance luminare with pressure die- cast housing toughened glass and secondary lens optics with IP 66 ingress protection efficency 120 lm/W including taking down old light complete all as specified and directed.

Supply & fixing 150 Watt (min 110 lumen/watt) LED street light made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 including taking down old light complete all as specified and directed by Engineer-in-Charge.

Supply & fixing 120 Watt LED flood light with high performance luminare with pressure die- cast housing toughened glass and secondary lens optics with IP 66 ingress protection efficency 120 lm/W including taking down old light complete all as specified and directed.

Supply & fixing 150 Watt LED flood light with high performance luminare with pressure die- cast housing toughened glass and secondary lens optics with IP 66 ingress protection efficency 120 lm/W including taking down old light complete all as specified and directed.

Supply and fixing Street light timer, Astronomical time operation, sunrise sunset based operations, Current Rating (In Amps): 20 Amp, Display : Digital, Operating Temperature: -10 to 55, Power/Voltage: 110 - 240VAC including taking down old street light panel complete all as specified and directed.

Supply and fixing in repair of new 45 watt (min 110 lumen/watt) LED new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting Source and LENs embedded toughned glass cover with IP66 Protection and impact resistance of IK07 including taking down old light complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED Bldg security light 70 Watt (min 110 lumen/watt) indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens with IP66 Protection including taking down old light complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 120 WATT LED street light (min 110 lumen/watt) made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 including taking down old light complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of test Link for connecting the earth pit and down conductor including taking down old complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 1x 50 sqmm copper conductor with 0.5 mm thick PVC sheathed cable including taking down old cable complete all as specified and directed.

Material & labour for straight through jointing heat shrinkable kit for cable of 240/300 sqmm 3.5 core suitable for aluminium conductor including earth work complete for LT cables complete all as specified and directed by Engineer-in-Charge.

Material & labour for straight through jointing heat shrinkable kit for cable of 95 to 185 sqmm 3.5 core suitable for aluminium conductor including earth work complete for LT cables complete all as specified and directed by Engineer-in-Charge.

Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 10 sq mm 3 core laid in duct / along pole/wall etc including making connection and taking down old cable complete all as specified and directed by Engineer-in-Charge.

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 3.5/4core laid in duct / along pole/wall including making connection complete all as specified and directed by Engineer-in- Charge.

Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5/4 core. laid in duct / along pole/wall tc including making connection complete all as specified and directed by Engineer-in-Charge.

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core. laid in duct / along pole/wall tc including making connection complete all as directed.

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core. laid in duct / along pole/wall tc including making connection complete all as specified and directed by Engineer-in-Charge.

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core. laid in duct / along pole/wall tc including making connection complete all as directed.

Supply & fixing HDPE of pressure rating 6kg/cm sq pipe of 65 mm outer dia including necessary bends, elbows, Tees etc on cable protection complete all as specified and directed by Engineer-in-Charge.

Supply & fixing HDPE of Pressure rating 6kg/cm sq pipe of 40 mm dia including necessary bends,elbows,Tees etc on cable protection complete all as directed.

Trimming tree branches on the route of LT pole , pump house , pipe , roof, street light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and lay Insulated screened PVC bedded, copper electric cables 1100 Volts grade with stranded Copper conductor of size 1.5 sq mm 2 core. laid in duct / along pole/wall etc including making connection and taking down old cable complete all as specified and directed.

Supply and laying Insulated screened PVC bedded, copper electric cables 1100 Volts grade with stranded Copper conductor of size 2.5 sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as specified and directed by Engineer-in-Charge.

Supply and laying copper cable PVC bedded, electric power cables (heavy duty) 1100 Volts grade with stranded sheathed copper conductor of size 4 Sq mm 2 core. laid in junction box / along pole /street light fitting /wall etc including making connection and taking down old unsv rusted cable complete all as directed.

Supply & fixing cable junction boxes IP 66/67 weather proof for out door installation with knock outs cable entry junction box size should be 205x255x112 with terminals including complete all accessories, all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable junction box, Supply & fixing of new cable junction boxes IP 66/67 weather proof for outdoor installation (with knock outs cable entry junction box size should be 300x100x450 mm aluminium bus bar 4 strip mounted on protection insulator with two Nos and front openable hinged and locking arrangements including complete all accessories all as specified and directed by Engineer-in-Charge.

Material & labour for scraping the old paint from steel tublar poles by wire brush not more than up to 9/11 mtr length above ground level including street light arms applying one coat of steel primer and two coat of aluminium paint and marking pole no. , complete all as specified and directed by Engineer-in-Charge.

Supply and fixing recess mounted 2 x 2 feet panel 36 Watts (min 110 lumen/watt) LED luminary back fit recess mounting, CRCA housing white powder coated, with decorative polymer diffuser complete with accessories locking arrangement, clips, per wire for connection and fixing in falls ceiling including taking down old light complete all as directed by Engr -in-Charge.

Material and labour for refixing of Old uprooted lightening arrestor strips including saddling of strips with suitable saddles and nails all as directed at site by Engineer - in - Charge.

Testing of earthing for earth resistance provided for various electrolde/ digital meter in panels /bldgs /main DB of building inside / motor/ DG set / transformer/ OVB/VCB/ etc all as per clause 19.146.3 of SSR part-I and recording the test results complete including providing earth megger and test leads complete all as specified and as directed. (Note :- The results are to be recorded in register as directed by Engineer-in-charge)

NOEL ENGINEERS (BID ID -3258557)

sapana enterprises (BID ID -3260986)

Shetty Construction Co (BID ID -3259929)

SHRI SAI ENTERPRISES (BID ID -3265414)

Chakshu Enterprise (BID ID -3261355)