REPAIR TO SEEPAGE, LEAKAGE, ROOF TREATMENT, SUNKEN FLOOR, WALL SEEPAGE, SAINTARY FITTING AND CONNECTED ITEMS TO ZONE C, ZONE D AND MD ACCN UNDER AGE B/R-I AT GE JHANSI

Amount

M&L for demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc, complete all as specified and directed.

M&L for brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with liquid water proofing compound as per Manufacturers instruction finished fair and even, complete all as specified and as directed. Note : The water proofing compound shall be measured and paid seprately.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished fair and even, complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement, complete all as specified and as directed.

Supply only integral liquid water proofing compound. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer, complete all as sppecified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of distemper oil emultion over a layer of JK/Birla wall care putty, complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash, complete all as sppecified and directed.

Dismantling/striping out of existing roof treatment (tarfelt & roof plaster etc) including PCC padding of any description and any thickness including backing and remove the debris, complete all as specified and directed.

Demolition of cement concrete of any description and in any position of WC’s/Bathroom etc in sunken portion area above ground floor, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces (to vertical surface) mixed with liquid water proofing solution @ 150ml in 50 Kg of Cement by weight, complete all as specified and directed. (Note : Water proofing compound shall be measured & paid separately under respective item only)

M&L water proofing treatment to toilet area of sunken floor complete all as specified and directed by Engr in charge with following course of description below :- (a) Applying first layer of cement slurry @ 0.488Kg/Sqm mixed with acrylic based polymer modified cementation composite compound coating @ 0.253Kg/Sqm of make as approved in technical instruction 5/2003 and be allowed to air cure for 4 Hours (b) Second layer of cement slurry @ 0.242Kg/Sqm mixed with acrylic based polymer modified cementation composite compound coating @ 0.126Kg/Sqm and be allowed to air cure for 4 Hours (c) Followed with water curing and testing for leak proof by ponding test for 48 Hours

M&L for PCC 1:5:10 Type E2 using 40mm graded stone aggregate as in mass filling in two layer in sunken portion, complete all as specified and directed.

M&L for 50mm dia GI pipe med gde as in spout to drain out if any leakage occures in the sunken portion, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding, levelling to roof/sunken slab and roof kerbs etcwith liquid water proofing solution (mixed @ 150ml in 50 Kg of Cement by weight), finished even and fair with proper slope as prepatory works to water proofing treatment, complete all as specified and directed. (Note : Water proofing compound, as required, shall be measured & paid separately under respective item only)

M&L of water proofing treatment to non-accessible roof slab with APP based modified polymeric membrane, seven layered with centre core 100 micron HMHDPE, outer film 20 micron each, having thickness 3mm weight not less than 3kg/Sqm as per manufacturer’s instructions with torch applicationcomplete all as specified and directed with following course of description below :- (a) 10 mm thick plaster in CM 1:4 mixed with WPC will be applied over the roof slab after removal existing treatment. After the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/sqcm using cement based cement grout. After the surface is repaireds the slab will be tested for water tightness again before proceeding with further treatment. (b) the surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimney stacks, etc. and other similar situation to ease up about corners. (c) Bitumious based primer confiorming to IS: 3384 @ 0.3 kg/SM to be applied on prepared surface, till the surface is property impregnated. (d) After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer's instruction. The overlap while toching shall be 100mm in longitudinal direction and 100 mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. (e) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (f) Fourth course of Apply a coat of bituminous aluminium paint @ 0.20 Kg/Sqm over APP membrance

M&L of water proofing treatment to accessible roof slab with APP based modified polymeric membrane centre core 100 micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3kg/Sqm as per manufacturer’s instructions with torch applicationcomplete all as specified and directed by Engineer-in-Charge with following course of description below:- (a)Firstst coat apply Bituminous primer confirming to IS -3384 of 1965 @ 0.4kg /sqm to be applied on prepared roof surface till the surface is properly inpregnated. (b)Second coat of bonding material using blown bitumen confirming to IS-702 of grade 85/25 @ 1.2kg/Sqm (c) Third course of laying of APP based modified polymeric membrane with 100 mm overlap in longitudinal direction , 150mm in tranverse direction and edges to be taken up to vertical wall of 20 cm height inserted into the vertical wall concealed the joint with bitumen sealent . All joints and changes in all direction should be covered with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane . (d) Fourth course of bonding material using blown type bitumen confirming to IS-702 of grade 85/25 @ 1.2 kg per Sqm and over spread sand for making rough surface (e) Fifth course of M&L for Cement concrete tiles of size 300X300X22mm thick machine pressed,cut and polished set and jointed in neat cement slurry and pointed in grey cement to match over 15mm thick screed bed in CM 1:6 complete all as specified.

S&F of medium grade concealed galvanised steel water tubing with all fittings fixed to wall or laid in floors for 15 mm bore, with and including for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and taking down old steel tubing with all fittings, complete all as directed. Make : Jindal / Prakash Surya /Tata

S&F of medium grade concealed galvanised steel water tubing with all fittings fixed to wall or laid in floors for 20 mm bore, with and including for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and taking down old steel tubing with all fittings, complete all as directed. Make : Jindal / Prakash Surya/ Tata

Dismantling water tank and removing to store exc. 500 litres & not exc. 1000 litres capacity of tanks, complete all as specified and directed.

Disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs of 500 Ltrs capacity for fixing new serviceable PVC tank and disposal of demolished material to out side of defence land, complete all as specified and directed.

Disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs of 1000 Ltrs capacity for fixing new serviceable PVC tank and disposal of demolished material to out side of defence land, complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as directed.

S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff

S&F in replacement of PVC lid suitable for PVC water storage tank of 500 to 1000 Ltr capcity, complete all as specified and directed.

S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed. Make : Hindware / Cera / Jaquar / Parryware.

M&L for Plain Cement Concrete Type B1 (1:2:4) (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, hold fast and similar work including weathering, slightly rounded or chamfered angles and throating as required including use and waste of form work, complete all as specified and directed.

S&F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, PVC pipe clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 290. GdeE-165, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 sqm including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but not exc one brick for inserting new bricks, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 sqm including refixing in the same opening complete all as specified and directed.

S&F of Solid PVC door frame of size 50mmx47 mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete, as specified in SSR Part-II 2010 section 8, complete all as specified and directed.

S&F factory made solid PVC core moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed

S&F 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. Make : Ashish, Classic

S&F of 150mm aluminum handle cast type anodized complete all specified and directed. (Make : Ashish, Classic)

S&F in replacement of bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed. Make: Hindware/ Cera/ Parryware/ Jaquar.

S&F in replacement of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed. Make: Hindware/ Cera/ Parryware/ Jaquar.

S&F PTMT grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed. Make : Camry / Cera / Parryware / Prayag

S&F in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed. Make : Hindware / Cera / Jaquar / Parryware / Prayag

S&F in replacement of Gun metal globe or Gate valves with ironwheel head, screwed both ends for iron pipe of 20 mm dia bore including taking out unserviceable valve, complete all as specified and directed. Make - Leader / Prince / Sant Valves / Kartar Valves

Taking down of eaves gutter and rain water pipes including all fittings any size and pattern, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, ISI Marked, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, with FI/PVC clamps complete all as specified and directed.

S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, ISI Marked, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, ISI Marked, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, with FI/PVC clamps complete all as specified and directed.

S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, ISI Marked, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F 110 mm bore PVC (SWR) bends with access door of any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC Nahani/ floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.

Demolition of cement concrete in ground floor including terrazo flooring and paving n exc 15cm thickness (below or above the ground level) built in cement mortar, complete all as specified.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic tiles 300x300mm, 7mm thick, jointless type, laid in floors, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed layer in CM (1: 6), complete all specified and directed. Make : Kajaria / Orient / Asian Tiles / Nittco / Somany.

M&L for glazed ceramic tiles, jointless type, of 300x450mm, 7 mm thick, fixed on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile, over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. Make : Kajaria / Orient / Asian Tiles / Nittco / Somany.

Dismantling of Framed timber scandling 40sq cm and over in section in any position complete all as specified and directed.

Dismantling of Framed timber fillet, rails, post, rafters, purlin etc n. exc 40sq cm in section in any position, complete all as specified and directed.

M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses or Sliding gate with frame with neccessary bearing (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.

Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of red oxide.

Dubey Construction Company

A K ENTERPRISES

M/S AADI TRADERS