COMPREHENSIVE MAINT TO CERTAIN MD ACCN, MESSES, BILLETS, REPAIR/REPLACEMENT TO DRAIN, PATH, CULVERT, FENCING, EARTHING PITS, LIGHTENING ARRESTORS, FLAME PROOF FITTING INTERNAL WIRING, ETC AND OTHER ALLIED WORKS AT AF STN MCC BASANT NAGAR

Amount

Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

M&L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed .

All as per item No 02 above but except bricks.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:4), complete all as specified and directed .

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiling etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed .

M&L for rendering 15 mm thick cement plaster in cement mortar (1:6) on brick Work or concrete surfaces including finished even and smooth without using extra cement, complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar (1:4) on of brick work or concrete surface, finish even and smooth (without using extra cement), incl WPC as per user manual, complete all as specified and directed .

M&L for rendering 10mm thick in cement mortar (1:3) over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth without using extra cement, complete all as specified and directed .

M&L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm on new surfaces and obtain smooth finish using sand paper, complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash on ceiling over one coat of primer etc, complete all as specified and directed.

M&L for preparation of old surfaces by removal of existing treatment and applying three coats of white wash on ceiling over one coat of primer etc, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls/ceiling and applying two coat of plastic emulsion paint and applying one coat of 2mm thick wall putty, complete all as specified and directed.

M&L for preparation of old surfaces on wall surface obtain smooth finish using sand paper including complete removal of existing treatment and apply on wall and applying two coats of plastic emulsion paint over a coat of acrylic primer including 3mm thick of wall care putty for with complete smooth surface as per manufactures instruction, complete all as specified and directed.

M&L for preparation of old surfaces on ceiling surface obtain smooth finish using sand paper including complete removal of existing treatment and apply on ceiling and applying two coats of plastic emulsion paint over a coat of acrylic primer including 3mm thick of wall care putty for with complete smooth surface as per manufactures instruction, complete all as specified and directed.

M&L for preparation of old surfaces obtain smooth finish using sand paper including complete removal of existing treatment and apply on wall, ceiling, roof boarder, drops, fins, chajja / roof facia, column etc and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction, complete all as specified and directed.

M&L for preparation of new plastered surface on wall, ceiling, roof boarder, drops, fins, chajja / roof facia, column etc obtain smooth finish using sand paper and applying two coats of exterior emulsion paint over a coat of acrylic primer as per manufactures instruction, complete all as specified.

M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ in 100mm thick concrete slab complete all as specified and directed.

M&L for Plain, Aluminium sheeting, 0.56 mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed), complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises complete all as specified and directed.

M&L for non-skid, ceramic, coloiured tiles, 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.18 sqm but not exc 0.38 Sqm as in floor of shade & designed as approved by GE, set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles, including 15 mm thick rendering in bedding layer or screed bed in cement mortar (1:6), in floors including dismantling tiles etc, complete all as specified and directed.

M&L for Glazed ceramic colour tiles joint free in vertical surface350 x 250 x 7/ 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with tiles including 10mm thick rendering in cement mortar (1:4) backing of wall tiles such as dado/skirting in vertical surface etc, complete all as specified and directed. Note:- shade & design as approved by EIC/GE.

M&L for Fully ulta/double charged/HD Vitrified tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but not exc 1.00 Sqm in floors, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:4) for laying floor finishes, complete all as specified and directed. Note:- shade & design as approved by EIC/GE.

M&L for Vitrified tiles, light shade, 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors, dado, skirting etc, set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes and pointed in white or coloured cement to match and including dismantling / demolition and rubbish off the primises etc, complete all as speciefied and directed.

M&L for outdoor Vitrified tiles, light shade, 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm , in floors, dado , skirting etc, set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes and pointed in white or coloured cement to match and including dismantling / demolition and rubbish off the primises etc, complete all as speciefied and directed.

M&L for 18 to 20 mm thick Kota stone slab flooring (Machine cut) with mirror polishing of any size laid over and including 20mm thick bedding layer in cement mortar (1:6) over 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring for laying floor finishes over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish, complete all as specified and directed.

M&L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in cement mortar (1:6) bedded and jointed in neat cement slurry, including dismantling, complete all as specified and directed.

M&L for Kota stone slab 18 to 20 mm thick in riser of steps, skirting, dado and pillar laid over rendering 10 mm thick in cement mortar (1:3) jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish, complete all as specified and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edge and dismantling, complete all as specified and directed.

M&L for Mirror polishing on marble/granite/Kota stone/stone work wherever required to give high gloss finish, complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc. 4 Sqm each (without taking off shutters from the frames) complete all as specified and directed..

M&L for factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification & drawing, complete all as specified and directed.

S&F Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type C-0(1:3:6 )(using 12.5mm graded stone aggregate) etc, complete all as specified and directed.

S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type C-0(1:3:6 )(using 12.5mm graded stone aggregate) etc, complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats complete all as specified and directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, veneered type on both sides face covered with any type colour decorative face with lipping/frame to match, complete all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC sheet on the front face & 2 mm thick prelam PVC sheet on back side, supplying & fixing in frame at site as per specification & drawing and as directed by Engr-in-Charge.

M&L for aluminium Anodized powder coated (Min. thickness of powder coating 50 micron) fixed frame of partiton or fixed window / ventilator , aluminium section weighing not less than 0.55kg/RM including 4.8mm thick sheet glass oridinary quality frosted glass or ACP sheet joining with rubber beading , aluminium snap beading, complete all as specifed and directed

S&F aluminium wire guard mesh of 4mm nominal dia of wire and average width of aperture 75 - 85mm and fixed with aluminium frame / staples, complete all as specified and directed

S&F 4.8 mm thick float glass ordinary quality' frosted glass and glazing with aluminum beading and gasket to aluminium framework in square exc 0.50 sqm in each pane, in repair, complete all as specified and directed.

Easing and Adjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc, complete. all as specified & as directed by Engineer-in-Charge. Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.

S&F floor spring double action hydraulically regulated made up of min 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty ISI Marked fixed in position, complete all as specified and as directed.

S&F aluminium (die cast) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed.

S&F Mortice lock 75mm, vertical type, 2 lever etc complete all as specified and as directed etc complete all as specified and as directed

S&F of Neoprene / EPDM Rubber gasket for fixing aluminium door and window shutters etc complete all as specified and as directed

S&F aluminium beading for fixing of aluminium door and window shutter etc complete all as specified and as directed

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section etc complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm quality or description from steel frame and all, complete all as specified and directed.

S&F 10 to 12 mm thick frosted glass door with 08 Nos of holes and two steel hinges and steel handles not less than 300 mm long on both sides of door, incl necessary locking arrangement, complete all as specified and directed.

M&L in repair 18mm thick water proof solid high gloss UV coated Action Tesa Board both sides smooth and gloss finish of approved shade fitted with necessary arrangement as in kitchen cabinet back sides, partition, shutters and shelves, etc., fixed with solvent cement adhesive and stainless steel screws and providing 1mm thick PVC lipping to exposed edges, complete all as specified and as directed.

S & F for 30 mm Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised complete all as specified and directed.

S&F for Magnetic catcher suitable for kitchen cabinet shutters, complete all as specified and directed.

S&F for 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair for Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts 150mm long (ISI Marked) complete all as specified and directed.

S&F for Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, 300mm long, complete all as specified and directed.

S&F for Extruded brass handles, fabricated type polished, 150 mm long complete all as specified and directed.

M&L in repair of one piece closet with bowl for coupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360x640x680 mm, S trap 220 mm with syphonic flushing cistern with necessary fittings complete all as specified and directed.

S&F in repair wash hand basin, table top, of size 600x400x175 mm vitrous China including, waste coupling & PVC waste pipe of 32 mm dia etc, complete all as specified and directed.

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed.

S & F in repairs 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs stop valve/angle valve, 15mm dia chromium plated, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair for 15mm bore CP, brass, wall mixture, 3 in 1 system, with provision for both hand shower and overhead shower with 115 mm long bend pipe, connecting legs and wall flanges (Without hand & overhead shower), complete all as specified and directed.

S&F for 15mm bore CP, brass, Centre hole mixer without pop up waste system with 450 mm long braided hoses, 20mm cartridge size for mixing hot and cold water screwed down for iron pipe for WHB, in repairs complete all as specified and directed.

S&F in repair for CP telephonic jet with all fitting and fixture for EWCs with 8 mm dia 1.2mt length long flexible tube, complete all as specified and directed.

S&F Mirror cabinet, PTMT, of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromium plated brass screws and PVC rawl plugs, complete all as specified and directed.

S&F in repair Brass chromium plated, shower rose, of 200mm size with arm and with or without swivel joints, complete all as specified and directed.

S&F for vitreous china, sensor, urinals, of size-485x300x740 mm including all necessary fittings etc, including taking down old U/S normal urinal complete all as specified and directed.

S&F for 8mm thick, toughend, frosted glass, urinal partitions of standard size and design as directed by Engr-in-charge, including all necessary stainless steel fitting etc, complete all as specified and directed.

S&F for Soap tray, brass, chromium plated and fixed to plugs on wall with brass screws, fixed in repair, complete all as specified and directed.

S&F for Towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repair,complete all as specified and directed.

S&F for Towel ring, brass, chromium plated, fixed with brass screws and plugs, fixed in repair,complete all as specified and directed.

S&F in repair PVC connections 45/60cm long superior quality with PTMT nut on both side,complete all as specified and directed.

S&F in repair grating round 100 mm size of CP complete all as specified and directed.

S&F in repair Vitreous china squatting pan of Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 using brick bats and finishing the top surfaces to match with the existing flooring, complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F in repair CP, towel racks with lower hanger complete all as specified and directed.

S&F for 110mm bore PVC bends/junction with access door any radius complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F for 75mm dia PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .

S&F in repair 75mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete, including taking up/down old pipe with all fittings, complete all as specified and directed.

All as per item No 82 above but laid in trench or in floor

S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .

Demolition of cement concrete unreinforced in ground floors and paving n. exc 15 cm thickness below or above gound level, concrete debris and rubbish off to a distance n.exc 100m complete all as specified and directed.

M&L for 75 mm thick, PCC, 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection / path/ any paved area, complete all as specified and directed.

M&L in repair for Soulwood WPC Exterior wall panelling size (2900x219x26) mm, any colour/design approved by Engr-in-charge, inclusive of fixing on to wall including L-Corner, moulding end caps and necessary frame work for fixed and screws as required at site, complete all as specified and directed.

S&F in repair double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance including one layer of 3mm thick wall care putty on new plasterd surfaces and obtain smooth finish using sand paper, complete all as specifed and directed.

M&L for 50 mm thick, PCC, 1:3:6 type C-1 (using 20 mm graded stone aggregate ) as in plinth protection / path/ any paved area, complete all as specified and directed.

M&L for 75mm thick, PCC, type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base, complete all as specified and directed.

M&L for 60 mm thick machine cut precast concrete coloured inter-locking paver block with grey cement and pigment,(M-35) grade any colour as approved by EIC /GE, complete all as specified and directed

All as per item No 92 above but except tiles.

M&L for 80 mm thick machine cut precast concrete inter locking paver block except tile ,(M-40) grade any clours as approved by EIC /GE complete all as specified and directed

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in cement mortar (1:6) bedded and jointed in neat cement slurry, including dismantling, complete all as specified and directed.

M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor/sub base finishes, complete all as specified and directed.

S&F in repair for precast factory made reinforced cement concrete manhole cover (Ist quality) including groove and hook arrangement for lifting and placing in position and sides covered by 2mm thick MS sheet medium duty (size and thickness of the cover will be intimated by the Engineer-in-Charge), complete all as specified and directed.

S&F mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete, conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F in repair precast factory made polycrete (SFRC) medium duty perforated drain cover 100 mm thick rectangle in shape upto 01 sqm area each with hole for drain, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil, complete all as specified and directed.

M&L for Plain cement concrete (1:2:4) Type B-1, (using 20mm graded crushed stone aggregate), as in copings, kneelers, apex stones,bed plates, including weathering, slightly rounded /benching or chamfered angles and throating,, complete all as specified and directed.( Rates include for use of formwork)

M&L for Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in surface channels, drains and bed of manhole, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, and mass concrete, complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for and disposal of debris to outside the station, complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs ( for manholes etc.), shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6 complete all as specified and directed. Note:- Reinforcement shall be measured and paid for separately under respective item of schedule 'A'.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Removing debris/excavated material to a distance exceeding 1.5KM but not exceeding 5 KM and depositing where directed at a level n. exc 1.50 m above the starting point, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and in existing concealed / surface PVC Conduit/ saddle medium grade, ISI marked 20 mm dia along with conduit fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet for provision of switches/regulators complete all as specified and directed by Engineer-in-Charge. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 111 above but 5 Amp socket outlet, independent.

All as per item No 111 above but on the same board.

All as per item No 111 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable.

All as per item No 2 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through PVC casing caping of ISI marked with fixing accessories and with pressed steel terminal box thickness 1.6 mm painted with one coat of black bituminous paint as a primary and two coats of enamel paint with 3 mm thick laminated sheet for provision of switches/regulators complete all as specified and directed by Engineer-in-Charge. NOTE:-After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 116 above but 5 Amp socket outlet, independent.

All as per item No 116 above but on the same board.

All as per item No 116 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 2.5 sq mm connected to common earth dolly.

Supply & fixing in replacement of switch piano type 5 amp SP one way ISI Marked complete all as specified and directed.

Supply & fixing in replacement of switch, 15 Amps, SP, one way, complete all as specified and directed.

Supply & fixing in replacement of socket outlet, 3 pin, 5 Amps, flush type, complete all as specified and directed.

Supply & fixing in replacement of socket outlet, 2-in-1, 3 pin, 5 amps and 15 amps, flush type, complete all as specified and directed.

Supply & fixing in replacement of stepped type, electronic fan regulator, flush type, on the existing phenolic sheet etc complete all as specified and directed.

S&F in replacement for modular switches, 6 amps, single pole, one way, complete all as specified and directed.

S&F in replacement for modular sockets outlet, 6 amps, 6 pin, 2 module, with shutter complete all as specified and directed.

S&F in replacement for modular switches, 16 Amps, single pole, one way, complete all as specified and directed.

S&F in replacement of modular socket outlet, 6-16 Amps, 3 pin, combined shuttered, complete all as specified and directed.

Supply & fixing in replacement of stepped type. electronic fan regulator modular complete all as specified and directed.

S&F in repair ceiling rose complete all as specified and directed by engineer in charge.

Supply & fixing in replacement of ding dong, bell, electric, 230 volt, AC complete all as specified and directed.

S&F in repairs, bell push, flush type, 5 Amps, complete all as specified and directed.

S&F single pole, blanking plate, in the existing cover plate complete all as specified and directed.

Supply and fix modular white cover plate with frame 3 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame 4 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame 6 module ISI marked complete all as specified and as directed.

Supply and fix modular white cover plate with frame 8 module ISI marked complete all as specified and as directed.

Supply and fix modular metal flush box 3 module ISI marked complete all as specified and as directed.

Supply and fix modular metal flush box 4 module ISI marked complete all as specified and as directed.

Supply and fix modular metal flush box 6 module ISI marked complete all as specified and as directed.

Supply and fix modular metal flush box 8 module ISI marked complete all as specified and as directed.

Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 4"x4" complete all as specified and as directed.

Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 7"x4" complete all as specified and as directed.

Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 8"x10" complete all as specified and as directed.

Supply & fixing in replacement of SPN enclosure with two pin and earth plug and socket complete with on SP MCB 20 Amps complete all as specified and directed.

M&L PVC insulated FRLS single core with strandard copper cable of size 6 Sqmm in two run and 6 Sqmm one run for earth and drawing through existing concealed conduit including taking down old UNSV cable complete all as specified and directed. NOTE :- 2 runs of 6 Sqmm cable and one run of 6 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

All as per item No 146 above but copper cable single core of size 4 Sqmm in two run with earth wire 4 Sqmm single run for continuity. NOTE :- 2 runs of 4 Sqmm cable and one run of 4 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

All as per item No 146 above but copper cable single core of size 2.5 Sqmm in two run with earth wire 2.5 Sqmm single run for continuity. NOTE :- 2 runs of 2.5 Sqmm cable and one run of 2.5 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

M&L PVC insulated FRLS single core with strandard copper cable of size 2.5 Sqmm in two run and 2.5 Sqmm one run for earth and drawing through ISI marked casing caping including taking down old UNSV cable acomplete complete all as specified and directed. NOTE :- 2 runs of 2.5 Sqmm cable and one run of 6 sqmm cable will be measured as one running meter for the purpose of measurement and payment.

Supply and fix in replacement post top lantern LED 40 W or next highest wattage having IP65 protction for single phase connection 50 Hz 230 Volts complete all as specified and directed.

Supply and fix in replacement LED bollard fitting 9 Watt with luminaire with MS Pipe housing with glare free PMMA diffuser , IP65 of height 800 mm suitable for single phase connection 50 Hz 230 Volts complete all as specified and directed.

M&L for Recess mounted 15 Watt high efficancy recess LED slim round downlighter IP20 with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed.

S&F in replacement wall mounting box type LED tube light fitting , extruded aluminium heat sink provided for efficient heat dissipation & Integrated electronic driver 1x20 watt comprising of strong jointless CRCA body complete with all accessories and complete all as specified and directed.

M&L for Recess mounted 36/ 40 Watt high efficancy 2x2 recess LED flat panel with high brightness LED for glare free homogenous illumination celing light complete with electronic driver complete all as specified and directed.

Supply and Fixing LED street light fitting 60 Watt pressure die case aluminium housing LED street light luminaires suitable for existing street light pole including all fixing accessaries complete all as specified and directed.

Supply and fixing in replacement of old unsv GI bracket made out of 32 mm bore,light grade 1.2 m long bent to shape suitable for street light fitting including MS flat clamp 50 x 6 mm 2 Nos for each bracket with nut & bolt complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape with galvanised steel wire or tape and overall PVC sheathed 2 core 6 sq. mm nominal cross section in service connections complete all as specified and directed.

S&F sheet metal enclosures DB Double door Verticle distribution type, 04 way, TPN DB , IP43, 415V & suitable for 4 POLE MCCB as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer complete all as specified and directed. Note : - MCCB shall be measured and paid separately

S&F sheet metal enclosures DB Double door Verticle distribution type, 08 way, TPN DB , IP43, 415V & suitable for 4 POLE MCCB as incomming including shruded neutral bar & Pan assy with earthing terminal as provided by manufacturer complete all as specified and directed. Note : - MCCB shall be measured and paid separately

S&F in replacement MCB DB TPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed.

S&F in replacement MCB DB SPN 4 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed.

S&F in replacement MCB DB SPN 6 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed.

S&F in replacement MCB DB SPN 8 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete all as specified and directed.

S&F in replacement MCB DB SPN 12 Way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240 for fixing of MCBs/Isolators/RCCBs etc complete as specified and directed by Engineer -in-Charge

Supply & fixing in replacement of MCCB TPN 63Amps 16KA complete all as specified and directed.

S&F in replacement of MCCB TPN 125 Amps 415 Volts 16 KA as per suitable sample of size complete all as specified and directed.

S&F in replacement of MCCB TPN 100 Amps 415 Volts 16 KA as per suitable sample of size complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 Amps 240 Volts."B" grade complete all as specified and directed.

S&F in repairs MCB,SP 40 Amps, 240 Volts."B" grade complete all as specified and directed.

S&F in repairs MCB SPN, 40 Amps, 240Volts ."B" grade complete all as specified and directed.

S&F in repairs MCB SPN, 63 Amps, 240Volts."B" grade complete all as specified and directed.

S&F in repairs MCB TPN, 63 to 100 Amps,415Volts ."B" grade complete all as specified and directed.

Supplying and fixing PVC conduit 25 MM dia along with accessories in surface/recess I/C or cutting the wall and making good the same in case of recessed conduit as required complete all as specified and directed.

S&F in replacement of Casing capping double lock type supper quality size 15 mm width ISI marked with fixing accessories complete all as specified and directed.

Supply and fix modular type gang box(3 module for one socket and one switche) suitable for 5/15amp 6pin including plate cover plastic sunken box etc including suitable size of switches and sockets complete all as specified and directed.

Taking down ceiling fan complete any type size from existing location and cleaning body blades etc including servicing, greasing,oiling,replacing wornout bearing ,bush and refixing the same at site complete all as specified and directed.

All as per item No 176 above but for Exhaust fan complete.

All as per item No 176 above but for wall/floor mounted fan .

Rewinding unserviceable ceiling fan 1200/1400 mm Sweep from site by strip opening,cutting removing the burnt winding from starter cleaning the slots and rewind the same with original guage of super enameled copper winding wire, insulation materials and all accessories & varnishing etc replacement of service wire copper twisted size 23/0.0076 including reassembling the fan complete all as specified and directed.

All as per item No 179 above but for Exhaust fan 300 mm sweep.

All as per item No 179 above but for wall/floor mounted fan 450 mm sweep.

M&L Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Material and Labour for Replacement of old unserviceable fan blades, (ISI Marked), suitable for 1200mm sweep ceiling fan duly painted in white/brown by using spray gun method(fully furnished) complete all as specified and directed.

Material and Labour for Repalcement of old unserviceable down rod of ceiling fan of dia 20mm bore "medium grade" complete with split pin, hanging clamp and rubber real (length of rod not less than 45cm and not more than 60cm) dully painted in white/brown by using spray gun method (fully furnished) complete all as specified and directed.

Supply and Fix cable PVC insulated and overall sheathed with flexible copper conductor cable of size 0.5 sqmm,3 core cut to size of approx 0.30 metre from block of fan to ceiling rose complete all as specified and directed.

Material and Labour for Replacement of old unserviceable gun metal bush of ceiling fan including neceassry laith, Grinding and welding work complete all as specified and directed.

Material and Labour for Replacement of old unserviceable shackle assembly kit (Rubber real -01, MS split clamp two Nos, nuts and bolts washers- 2 Nos & split pin -02 Nos) suitable for ceiling fan of 1200/1400mm sweep complete all as specified and directed.

Material and Labour for Replacement of old unserviceable steel screw of size 5mm to 8mm (to be used for fixing of fan blade) complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, and accessories 230V, 1200/1400mm sweep with squirrel cage induction motor complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix exhaust fan sweep 250 mm in replacement made up of sturdy engineering metal body complete with louvers shutter , voltage 230 V , 50 Hz , 1200 RPM copper wound complete all as specified and directed.

Supply and fix Ventilation fan PVC (250 mm Sweep) with louvers and acessories complete all as specified and directed.

Supply and fix Ventilation fan PVC (200 mm Sweep) with louvers and acessories complete all as specified and directed.

Material and Labour for Replacement of old unserviceable capacitor AC 400/415 volts 2.5 mfd (ISI marked) complete all as specified and directed.

Material and Labour for Replacement of old unserviceable capacitor AC 400/415 volts 3.15 mfd (ISI marked) complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground earth pit not less than 2.25 M deep below ground level with top edge of the plate not less than 1.5 M below normal ground level connected to galvanised strip of 25x4 mm by means of nuts, bolts, checknuts, washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part I of 2009 connected to and including earthing test point or disconnecting / testing link including excavation/ earth work in any strata, removal of surplus earth, GI pipe for watering and funnel, GI Pipe medium grade 40mm dia for earth lead protection, PCC 1:3:6 type C1 chamber with chamber cover in RCC 1:2:4 type B1 complete all as specified and directed.

M & L in repairs earthing complete with galvanised steel earth plate electode 600 x 600 x 6.0 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level connected to & including galvanised steel wire 4.0 mm dia size means of nuts and bolt check nuts and washers of galvanised rion sheet all as shown in electrical plate Nos 5 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including refilling earth and removal of surplus soil upto 50 mtrs PCC 1:3:6 type CI chamber precast RCC cover 40 mm thick reinforced with 6 mm dia MS bar 3 Nos both way with handle made out of 6 mm dia MS bar water pipe with wire mesh and connecting testing etc complete all as specified and directed.

Material and Labour for making new hole of 150 mm dia and 3.0 mtr depth or excvation of earthing size 1.5x1.5x3.5 mtr one pit and supply and filling in micronite(bentonite) base earthing enhancement micronite compound (0.001 ohms mtr conductive grounding granuals 25 kg in each pit) and copper electorode rod 17.7 mm dia and 3 mtr long as per relavent IS and to achieving the desired earth result complete all as specified and as diercted by Engr-in-Charge. (Each earth pit shall include minimum 25 kg NABL Lab certified micronite aggregate and cement 12.5 kg for filling bore hole with water mixed in 1:2 ratio (two parts of micronite aggregate compound and one part of cement), so also achieve eath resistance below 1 ohm including PVC pit box with cover shall be deemed to be inclusive in the quoted rates. In case of non achieving of desired results the same shall be re-done by the contractor on his own cost.

M&L in replacement Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

Supply and fix aluminium strip 25 mm x 4 mm complete with saddles and fixing screws etc for roof conductors and down conductors above ground level including removing u/s strips complete all as specified and directed.

Supply and fix copper strip 20mm x 3.15 mm complete with insulators and fixing screws etc for roof/wall above ground level including removing u/s strips complete all as specified and directed.

Supply and fix single pointed air termination aluminium rod,12 mm dia, 300 mm long all as specified and directed.

S&F porcelain strip holder on wall and roof of suitable size including removing broken u/s one complete all as specified and directed.

M&L 32 mm GI pipe light grade of 1.3 mtr piece fixing in PCC cubical and complete connection of existing air termination rod complete all as specified and as directed,

M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping and necessary form work, weathering slightly rounded or chamfered angles and throating etc complete all as specified and directed.

M&L for Testing of exisiting earthing resistance with suitable digital Earth tester and recording the readings obtained and making the earthing good by pouring the salt water complete up to the satisfaction of the Engr-in-Charge.

Repairs to earth chambers by demolishing unserviceable earth chambers and fixing new chambers of PCC 1:3:6 type C1 as per electrical plate no.3 of SSR Part-I complete all as specified and directed.

Repairs to earth chamber cover by removing unserviceable earth chambers cover and fixing new cover all as specified and directed.

M&L for CI plate triangular with 500 mm long spike for writing earthing name and value complete all as specified and directed.

M&L for point wiring with single core FRLS PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through in enamelled steel conduit suitable for flameproof switch/socket/LED Bulk Head ligh/Fluorescent LED fixed on wall, ceiling with GI saddles GI screws, rawal plugs (concealed conduit wiring) with all fittings including Tee, junction boxes and provision of modular metal flush box of suitable size modular white cover plate with frame for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with stranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and directed.(a) One light point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

Supply and fix Fluorescent LED tube light fitting 1 x 16/20W flameproof type made of Die cast aluminium alloy housing with heat resistant glass/heat resistant dome glass/extrenal reflector with CMRI certified LED FLameproof well glass luminaire for gas/vapour grtoup of IIA & IIB ans Zone 1 & IP65 protection etc. complete with all accessories prewired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fix Fluorescent LED tube light fitting 1 x 8 W flameproof type made of Die cast aluminium alloy housing with heat resistant glass/heat resistant dome glass/extrenal reflector with CMRI certified LED FLameproof well glass luminaire for gas/vapour grtoup of IIA & IIB ans Zone 1 & IP65 protection etc. complete with all accessories prewired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 15W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S & F flame proof exhaust fan 305 mm (12)" sweep heavy duty 1440 RPM, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of cable 3 core of size 0.5 sqmm (16/0.2 mm) from ceiling rose to fan and connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fix switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Suppply and fix flame proof switch socket & plug combined in LM 6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed.

M/S Parshant Associates (BID ID -3370320)

Singh Associates (BID ID -3378309)