Extension of W/C of O/L RD 111000-R Ratta Khera Disty (Pipe line)

Amount

Works Details

Providing lowering, laying cutting (cut surface to be uniformely finished), joining with rubber ring with marked with IS 5382 and testing of SPIGOT AND SOCKETTED RCC NP2 MARKED WITH IS 458:1988 and special into unloading, stacking, handling, rehandling etc. complete in all respects to the satisfactions to the Engineer-in-charge as per HSR item no. 28.60 for 450 mm dia

Excavation for pipeline running udner pressure in trenchs and pits, in open area, where disposal of surplus earth is done alongwith the alignment without triming and dressing sides, levelling of beds of trenches of correct grade, joint, holes cutting trees and bushes etc refilling consolidation and watering of refill in 15 cm layers and restoration of unmettalled or unpaved surface its original condition, including the cost of dewatering of rain water civersion of traffic, night signal fixing caution board, wrirting etc and outside the town in ordinary soil for 450mm dia RCC NP2 pipe as per HSR item no. 6.8 b (i)

E/W excavation in ordinary soil exclusive of compensation of earth including breaking of clods and dressing of bottom and side filling around masonry 15 cm layer with compensation within a lead upt 15 cm as per approved design section and PWD specification as per HSR item no. 6.2 (b) and 6.3 (i)

First class brick work laid in cement sand mortar 1:5 in foundation and plinth Side Lining Nakka & culvert complete in all respect as per approved drawing & PWD specification and as per HSR item No. 11.3

Cement Concrete 1:4:8 with brick ballast 40mm nominal size in foundation and plinth HSR item No. 10.36 (for Nakka Culvert etc.)

Cement plaster 10mm thick cement mortar in 1:4 fillet gola plastring of nakkas and culvert etc. Complete in all respect as per approved drawing and PWD specification as per HSR item No. 15.5

Supply of RCC lids size 18" dia at site of work as per approved drawing design and specification (N.S. Item) (As per CADA)

Supply of RCC Panels size 24" at site of work, as per approved drawing design and specification (N.S. Item)(As per CADA)

Providing fixing 16" CI Nakka complete in all respect as per current market rates as per CADA pattern and rate approved vide CE/CADA memo no. 2565/30W dt. 03.05.2016

Fixing of RCC Panel size 18" at site of work, as per approved drawing design and specification (N.S. Item) (As per CADA)

Providing & Fixing STEEL BAR EMBEDDED PLASTIC STEPS OF SIZE MMX165 MM of orange colour, confirming to specification in pump chambers, manholes etc. having minimum 3mm thick polypropylene polymer confiriming to IS: 10910 encapsulated on 12mm dia ribbed steel bars per IS : 1786, the rate include cost of setting the same to correct lines and levels dully embedded in 1:2:4 cement cocnrete including carriage, loading, unloading, stacking, handling, rehandling etc complete in all respect to the satisfaction of EIC, HSR item no. 29.28

the nangli coop LC society Ltd

THE DHAND TANUJ CO OPERATIVE LANDC SOCIETY LTD

J.S.R. POWER BUILDER AND DEVELOPERS

Naresh Kumar Contractor

NIHAL SINGH

Naresh Kumar Contractor