Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹83 LAccepted-AOC 143 INDUSTRIAL AREA PHASE II PANCHKULA HARYANA 134112 | PANCHKULA | HARYANA | 134112 | ₹83 L Quoted ₹83.4 L | L1 | Accepted-AOC Lowest rate amount and accept all conditions |
| 2 | L2₹84.9 LRejected-Finance 46 LOWER GROUND FLOOR CHARMWOOD PLAZA EROS GARDEN FARIDABAD HARYANA 121009 | FARIDABAD | FARIDABAD | HARYANA | 121009 | ₹84.9 L | L2 | Rejected-Finance Highest rate amount |
| Sl No | Description | Qty | Unit | Avon Engineering Company L1 | ace marketing pvt ltd L2 |
|---|---|---|---|---|---|
| 1.00 | Supply, Erection and Commissioning of 5 Cs. VT Axial /Mixes flow pump of 1440 RPM, having approx, static lift 15.0 ft-20ft, Y body with MS delivery along with bend of minimum thickness 8 mm of length 12 mtrs. (6+6) Mtr. with both side flange welded with epoxy coating, incl. welding etc. complete in all respect as per site requirement ( As per latest technical specification approved by I&WRD Deptt, Haryana). | 3 | No. | 10,40,000 ₹31.2 L | 10,95,000 ₹32.9 L |
| 2.00 | Supply, Erection and Commissioning of solid shaft squirrel cage 30 HP LT Motor 3 phase 415V induction Motor 1440 RPM, suitable for 5 Cs pump complete in all respect as per motor capacity & ATS starter as per site requirement ( As per latest technical specifications approved by I&WRD Deptt, Haryana). | 3 | No. | 2,65,000 ₹8.0 L | 2,48,000 ₹7.4 L |
| 3.00 | Supply, Erection and Commissioning of fully automatic ATS Starter suitable for 30 HP motor, 3 Pole, contactors of 80A/80A/50A for main transformer/start, interlining through bus bars of suitable size complete in all respect, with degree of protection IP 54 complete with small item like air cooled ATS, thimble, Nut Bolts Lugs etc. With a stand of MS Angle (50x50x6mm) of 1 feet height from floor level and with allied accessories ( As per latest technical specifications approved by the department). | 3 | No. | 3,60,000 ₹10.8 L | 3,85,000 ₹11.6 L |
| 4.00 | Supply, Erection and Commissioning of MS delivery pipe 258.9 mm inner diameter made of 6 mm thick MS Plate both end flanged (in>=6 mtr pcs) as per approved specification and made including SS Nut and Bolt, Rubber sheet 1/8” & other fitment accessory required. | 18 | Mtr. | 15,200 ₹2.7 L | 15,500 ₹2.8 L |
| 5.00 | Supply, erection & commissioning of M.S. Girdar-Parallel Flange Section (Conforming to IS 12778:2004) size N PB 300x150 mm square (weight per kg/meter 66.30) with primer and Bitumnious based paint inside and outside. | 2,000 | Kg | 165 ₹3.3 L | 160 ₹3.2 L |
| 6.00 | Supply, Erection and Commissioning of 10 Cs. VT Axial /Mixes flow pump of 1440 RPM, having approx, static lift 15.0 ft-20ft, Y body with MS delivery along with bend of minimum thickness 8 mm of length 12 mtrs. (6+6) Mtr. With both side flange welded with epoxy coating, incl. welding etc. complete in all respect as per site requirement ( as per latest technical specification approved by department. | 1 | No. | 17,12,000 ₹17.1 L | 16,88,000 ₹16.9 L |
| 7.00 | Supply, Erection and Commissioning of solid shaft squirrel cage 50 HP LT Motor 3 phase 415V induction Motor 1440 RPM, suitable for 10 Cs pump complete in all respect as per motor capacity & ATS starter as per site requirement ( As per latest technical specifications approved by I&WRD Deptt, Haryana). | 1 | No. | 5,22,000 ₹5.2 L | 5,05,000 ₹5.0 L |
| 8.00 | Supply, Erection and Commissioning of fully automatic ATS Starter suitable for 50 HP motor, 3 Pole, contactors of 150A/110A/80A for main transformer/start, interlining through bus bars of suitable size complete in all respect, with degree of protection IP 54 complete with small item like air cooled ATS, thimble, Nut Bolts Lugs etc. with a stand of MS Angle (50x50x6mm) of 1 feet height from floor level and with allied accessories ( As per latest technical specifications approved by I&WRD Deptt, Haryana). | 1 | No. | 5,10,000 ₹5.1 L | 5,10,000 ₹5.1 L |
Updated dates
Tender Value
₹79.0 L
EMD Value
₹1.6 L
Closing Date
9 Feb 2026, 5:00 pmClosed
Executive Engineer
Executive Engineer, HWS Mechanical Division Canal colony Hisar Haryana 125001
Supply, Erection and Commissioning of 5 Cs. Capacity (3 Nos.) VT Pumps and 10 Cs. Capacity (1 Nos.) VT Pump with allied accessories for new pump houses constructed by Civil Wing sites in such vast jurisdiction of block Tohana and Bhuna in district Fa
2026_HRY_497154_1
(Fatehabad-19) 5 Cs. Capacity (3 Nos.) VT Pumps and 10 Cs. Capacity (1 Nos.) VT Pump block Tohana an
Open Tender
Pumps/Motors
21 days
HWS Mechanical Division Canal colony Hisar
Please refer tender documents
4 documents required · 4 mandatory
₹5,000
₹1.6 L
Yes
HWS Mechanical Division Canal colony Hisar
21 Apr 2026
17 Jan 2026
10 Feb 2026
17 Jan 2026
9 Feb 2026
17 Jan 2026
23 Jan 2026
Supply, Erection and Commissioning of 5 Cs. VT Axial /Mixes flow pump of 1440 RPM, having approx, static lift 15.0 ft-20ft, Y body with MS delivery along with bend of minimum thickness 8 mm of length 12 mtrs. (6+6) Mtr. with both side flange welded with epoxy coating, incl. welding etc. complete in all respect as per site requirement ( As per latest technical specification approved by I&WRD Deptt, Haryana).
Supply, Erection and Commissioning of solid shaft squirrel cage 30 HP LT Motor 3 phase 415V induction Motor 1440 RPM, suitable for 5 Cs pump complete in all respect as per motor capacity & ATS starter as per site requirement ( As per latest technical specifications approved by I&WRD Deptt, Haryana).
Supply, Erection and Commissioning of fully automatic ATS Starter suitable for 30 HP motor, 3 Pole, contactors of 80A/80A/50A for main transformer/start, interlining through bus bars of suitable size complete in all respect, with degree of protection IP 54 complete with small item like air cooled ATS, thimble, Nut Bolts Lugs etc. With a stand of MS Angle (50x50x6mm) of 1 feet height from floor level and with allied accessories ( As per latest technical specifications approved by the department).
Supply, Erection and Commissioning of MS delivery pipe 258.9 mm inner diameter made of 6 mm thick MS Plate both end flanged (in>=6 mtr pcs) as per approved specification and made including SS Nut and Bolt, Rubber sheet 1/8” & other fitment accessory required.
Supply, erection & commissioning of M.S. Girdar-Parallel Flange Section (Conforming to IS 12778:2004) size N PB 300x150 mm square (weight per kg/meter 66.30) with primer and Bitumnious based paint inside and outside.
Supply, Erection and Commissioning of 10 Cs. VT Axial /Mixes flow pump of 1440 RPM, having approx, static lift 15.0 ft-20ft, Y body with MS delivery along with bend of minimum thickness 8 mm of length 12 mtrs. (6+6) Mtr. With both side flange welded with epoxy coating, incl. welding etc. complete in all respect as per site requirement ( as per latest technical specification approved by department.
Supply, Erection and Commissioning of solid shaft squirrel cage 50 HP LT Motor 3 phase 415V induction Motor 1440 RPM, suitable for 10 Cs pump complete in all respect as per motor capacity & ATS starter as per site requirement ( As per latest technical specifications approved by I&WRD Deptt, Haryana).
Supply, Erection and Commissioning of fully automatic ATS Starter suitable for 50 HP motor, 3 Pole, contactors of 150A/110A/80A for main transformer/start, interlining through bus bars of suitable size complete in all respect, with degree of protection IP 54 complete with small item like air cooled ATS, thimble, Nut Bolts Lugs etc. with a stand of MS Angle (50x50x6mm) of 1 feet height from floor level and with allied accessories ( As per latest technical specifications approved by I&WRD Deptt, Haryana).
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
techsummary_576053.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.58 MB
BOQ_576053.xls
BOQ • 0.24 MB
BidbookFatehabad19.pdf
Other Document • 34.46 MB
Download all tender documents and submit your bid