IMPROVEMENTS OF ROAD FROM HANUMASAGAR BUS STAND TO GAJENDRAGADA MAIN ROAD IN HANUMASAGAR VILLAGE OF KUSHTAGI TALUKA

CONSTRUCTION OF ROAD

Clearing and grubbing road land including uprooting rank

vegetation, grass, bushes, shrubs, saplings and trees girth up to

300 mm, removal of stumps of trees cut earlier and disposal of

unserviceable ...

Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades,

levels and dimensions. Excavated material to be used in

embankment with a lift upto 3m...

Loosening, leveling and Compacting original ground supporting

embankment to facilitate placement of first layer of embankment,

scarified to a depth of 150 mm, mixed with water at OMC and then

Construction of sub-grade and earthen shoulders with approved

material obtained from borrow pits with all lifts & leads,

transporting to site, spreading, grading to required slope and

compacted to mee...

Prime Coat over WMM/WBM.Providing and applying primer coat with SS1 grade Bitumen

Emulsion on prepared surface of granular base including

cleaning of road surface and spraying primer at the rate of 0....

Tack coat on Granular surface treated with primer.Providing and applying tack coat with RS1 Bituminous Emulsion

using emulsion pressure distributor at the rate of 0.25 kg/m2

Granular Surface

Close Graded Premix Surfacing/Mixed Seal Surfacing.Providing, laying and rolling of close-graded premix surfacing

material of 20 mm thickness composed of 11.2 mm to 0.09 mm

(Type-A) or 13.2 mm to 0.09...

Kilometre Stone.Reinforced cement concrete M15grade kilometre stone of

standard design as per IRC:8-1980, fixing in position including

painting and printing etc

Kilometre Stone.Reinforced cement concrete M15grade kilometre stone of

standard design as per IRC:8-1980, fixing in position including

painting and printing etc

Painting Lines, Dashes, Arrows etc on Roads in Two Coats

on New Work.Painting lines, dashes, arrows etc on roads in two coats on

new work with ready mixed road marking paint conforming

Providing and fixing of retro- reflectorised cautionary,

mandatory and informatory sign as per IRC:67:2022 made

of Class B Type IV retro reflective sheeting fixed over 2 mm

thick aluminium sheeting vi...

Supplying and Fixing of Molded Shank Raised Pavement

Markers / Cat's Eye made of polycarbonate and ABS moulded

body and reflective panels with micro prismatic lens capable of

providing total internal ...

Providing and fixing board displaying information, such

as 'Name of work, Tender cost, Name of Contractor, Work

completion and liability period etc', having rectangular shape

of 1.20m x 0.90m size mad...

Scarifying Existing Granular Surface to a Depth of 50 mm by

Mechanical Means using Hydraulic excavator

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Plant Mix Method

Construction of Granular Sub-Base of required grading as

per design mixing in a mechanical mix plant at OMC, carriage

of mixed Material to work site, spreading in uniform layers

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

of mixed Materia...

Providing and laying Bituminous Macadam with 120 TPH

capacity hot mix plant batch type using crushed aggregates

of specified grading premixed with bituminous binder

VG-40 @ 3.4% by weight of mix, tran...

IMPROVEMENTS OF DRAINAGE

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

CONSTRUCTION OF BOX CULVERT AT 0.6 KM

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

A toe wall for toe protection can either be in dry rubble masonry in

case of dry rubble pitching or pitching with stones in wire crates

or it can be in PCC M15 nominal mix if cement concert block have...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations and other similar works etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical Specifications