REPAIR/ MAINT OF INTERNAL ELECTRIC SUPPLY, SECURITY LIGHT AND ALLIED WORKS IN OP, TECH AND MES AREA AT AF STN GORAKHPUR

Amount

Taking down carefully point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

M&L for point wiring controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia and 3mm thick hylem sheet all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed for following :- (a) One Light/fan point controlled by one switch complete all as specified and directed.

(b) One 5 Amps socket point controlled by one 5 Amps switch on same board complete all as specified and directed..

(c) One 5 Amps socket point controlled by one 5 Amps switch on independent board complete all as specified and directed..

(d) One bell point controlled by one 5 Amps bell push complete all as specified and directed..

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings,and 3mm thick hylem sheet including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 2 to 7 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

M&L for point wiring controlled by one 5A switch using 1.5 sqmm cable (nominal area) stranded copper conductor (FRLS), single core, PVC insulated and unsheathed cable, 1100 V grade in and including PVC casing caping all as directed with sunken type pressed steel terminal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor PVC insulated, 3mm thick hylem sheet etc and unsheathed cable as in earth wire connected to common earth dolly completed all as specified and directed. (a) One Light/fan point controlled by one switch complete all as specified and directed..

(b) One 5 Amps socket point controlled by one 5 Amps switch on same board complete all as specified and directed...

(c) One 5 Amps socket point controlled by one 5 Amps switch on independent board complete all as specified and directed...

(d) One bell point controlled by one 5 Amps bell push complete all as specified and directed...

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including PVC casing caping with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 8 to 13 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface.(ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

M&L Switch piano flush type single pole, one way 5 Amps 230 Volts AC circuit complete all as specified & directed by Engr-in-Charge.

M&L for socket outlet 5 Amps, 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and directed by Engr-in-Charge.

S&F socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

S&F switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

S&F bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

S&F lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

S&F Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Taking down old unserviceable light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.

S&F 10 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No. ENDURA LINE ARNE OBS10WLED865SPCWH or equivalent in Bajaj / CG.

S&F 22 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Phillips/Havells/Bajaj / CG.

S&F recess mounting LED luminaire of size 2'x2' white 34 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make:- Havells Cat part No. VENUSNEOHE2XR34WLED830PIRSENSOR or equivalent in Bajaj /CG.

Supply and fixing LED Bldg S/ light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make:- Phillips/Havells/Bajaj / CG.

S&F 40mm bore GI pipe, light grade with all fittings laid in trenches, road crossing and fixed to walls, on poles etc for cable protection complete all as specified and directed.

Supply and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connections of 6 Sqmm size twin core flat solid conductor Service main cable complete from pole to distribution board main controlling switch complete all as specified and as directed at site.

S&F in replacement brackets made out of 40/50mm dia medium grade GI pipe 1.50 mtr long bent to shape and size fixed on location using new 2 nos 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed.

Taking down carefully old and unserviceable sub main wiring of 2/3 runs or main-wiring of any size of aluminium conductor cable from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc including making good disturbed surface of wall ceiling etc complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 2.50 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 2.5 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4.0 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 4 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for sub main wiring with 2 Nos single core PVC insulated -unsheathed 6.0 Sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 6.0 Sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6.0 Sqmm conductor cable, 1 No. 6.0 Sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

Taking down old unserviceable MCCB DBs / MCB DB / Main Switches including MCBs/ MCCBs/ Isolaters, complete all as specified and as directed. Note: Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.

S&F factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates all as specified & directed.

S&F sheet metal enclosure distribution board SPN 2 ways complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal main complete all as specified and directed..

S&F MCB, SP, 6 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SP, 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, SPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TP, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F MCB, TPN, 40 to 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one Triple pole MCB 32 Amp complete all as specified.

S&F in replacement U/S and broken exhaust fan (air freshener) single phase 230/240 volt AC 250mm sweep with louvers, plastic body, with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.Make: Havells/Bajaj/CG.

S&F in replacement U/S and broken exhaust fan (air freshener) single phase 230/240 volt AC 300mm sweep with louvers, plastic body with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed.Make: Havells/Bajaj/CG.

S&F in replacment U/S and broken exhaust fan single phase 230/240 volt AC 450mm sweep, with painted louvers, metal body, with twisted copper flexible wire 23/0.0076mm including taking down old fan and deposited in MES store complete all as specified and directed. Make: Havells/Bajaj/CG.

S&F in replacement unsv wall mounted fan single phase 230/240 volt AC 400mm sweep, with regulator, oscillation type complete fixed properly on wall and connecting /testing as directed. Note Old unsv fan will be deposited to E/M store yard .Make: Havells/Bajaj/CG.

Repairing of light point (normal/ flameproof), fan point, socket point 5A/15A, switches sockets, fan regulator, light fixtures any type, lamp any type, MCB DB's & all electrical accessories in day to day/door to door maintenance and making it serviceable in all respect with replacement of any major part but including small length of wires (not more than 50cm) adhesive cable and other connected minor accessories by providing sufficient and skilled manpower. Work shall also include to check & removal of current leakages in Bldgs and any urgent nature of work as and when directed. The scope also include cutting of existing Bakelite sheet to accommodate new elect fittings/fixtures like switches, sockets, fan regulators etc. Note :- (a) The rate quoted by the contractor for Each Job is deemed to be included consisting of minimum 03 complaints in working hours between 0900 AM to 0500 PM in Tech and MES area by engaging one electrician and one helper. (b) The contractor or his representative will take complaint from MES complaint Register through MES job card. (c) The contractor will made separate items register with location and signature of user. (d) The contractor will maintain complete details of Job cards (Working/Off working hours) and items involved with date and user signature. (e) The ladder and T&P as required will be provided by the contractor. (f) Risk factor & security pass will be the contractor's end. (g) Material will be measured and paid separately in the relevant item here after on supply only. (h) All supply material shall be deposited by contractor in MES store yard and issued in every Job Card as per requirement. (j) The tradesmen should be available at MES area complaint cell (In MES Complex), after completing their daily services as well as during off working hours / Night / Sunday / Holiday.

All as per Item No. 51 above but for attending the electrical complaints during off working hours / Night / Sunday / Holiday time for 12 hours. Note :- All as per item No 51 above but the rate quoted by the contractor for 'Each Job' is deemed to be included 01 complaint in Tech & MES Area

Supply only in replacement fan regulator electronic step up type, SP 230 volt complete all as specified and as directed.

Supply only in replacement switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

Supply only in replacement modular switch single pole 1 way, 1 module, 16 Amp complete all as specified and directed.

Supply only in replacement modular socket out let multipurpose 6A -3 pin, SP 1 way 2 module complete all as specified and directed.

Supply only in replacement modular socket out let multipurpose 6A/16A-2/3 pin, SP 1 way 2 module complete all as specified and directed.

Supply only in replacement modular bell push pole 1 way, 1 module, 6 Amp complete all as specified and directed.

Supply only switch socket combination multipurpose 5 pin 5/15 Amps complete all as specified and as directed at site.

Supply only switch socket combination multipurpose 5 pin 5 Amps complete all as specified and as directed at site.

Supply only in replacement switch piano, flush type 15/16 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement socket outlet, 3/5 pin, 5/6 amps flush type complete all as specified and directed.

Supply only in replacement socket outlet, two in one 3 pin, 5/6 & 15/16 amps flush type complete all as specified and directed.

Supply only in replacement bell push, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

Supply only in replacement Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Supply only in replacement lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply only in replacement lamp LED 9/12 watt, 240 volts complete all as specified and directed.

Supply only tape insulation, 1100 volts grade 20mm width, 15 mtrs long complete all as specified and directed.

Supply only in replacement capacitor of capacity 2.5 mfd PVC body complete all as specified and directed. Make:- EPCOS/JYOTI/ USHA

Supply only in replacement capacitor of capacity 3.15 mfd PVC body complete all as specified and directed. Make:- EPCOS/ JYOTI/ USHA

Supply only in replacement single run of single core PVC insulated unsheathed cable of size 2.5 Sqmm, FR copper stranded conductor complete all as specified and directed.

Supply only wire flexible 23/0.0076, twin core twisted, PVC insulated copper stranded conductor complete all as specified and directed.

M&L in replacement for factory made gate light junction box, single phase, 2 wire, 240 volts, weather proof pole mounted made out of 1.63 mm thick MS sheet of size 250x150x100mm depth, with properly insulated aluminium buses - 02 Nos of 32 Amps rated current cap with holes for connecting of cables, hinged door and locking bolt, handle complete all as specified and directed.

Supply and fixing in repairs BLDC ceiling fan PCB Controller Kit along with speed control Remote 1 N ceiling fan 5 star rated, 1200mm sweep , 230 Volts, 50 Hz AC, complete with blades,with anti suicide down rod, set of canopy and connecting up including three core PVC insulated multi stranded copper conductor cable of size 2.5 Sqmm wire which shall be passed through PVC flexible conduit, from ceiling rose/connentor to fan of length not less than 1.0 meter complete all as specified and directed. Note Old unsv fan will be deposited to E/M store yard Make: Havells/Bajaj/CG. Make - Usha/ Bajaj/ Havells

Supply only in replacement complete fan hanging assembly set comprising with rubber reel, MS clamps, nuts, bolts with one lock hole and lock pins suitable for any type of fans & down rods complete all as specified and directed.

Supply only in replacement 300mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified and directed.

Supply only in replacement 900mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified and directed.

M&L in repairs earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in to ground ( earth pit) not less than 2.25 metres deep below GL with top edge of earth plate ot less athn 1.50 m below ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, connected to GI lead wire of 4 mm dia.(7.50 m Long) by means of nuts, bolts and washers, checknuts of GI and protected by the GI pipe light grade 15 mm nominal bore(7.5 m long) for earth lead wire and watering pipe light grade of 20 mm nominal bore, 0.63 mm thick G I sheet funnel , wiremesh, earthing test point etc complete including necessary earth work and excavation in any type of soil , PCC 1:2:4 type B1 earth pit and Precast RCC cover 65 mm thick duly reinforced with 6 mm dia. MS round bars @ 100mm C/C both ways,with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SI Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

M&L in repairs earthing complete in replacment with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip of size 32/6mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Taking out & removing old burnt-out winding and rewinding of motor of ceiling fans 1200/1400 mm sweep of any description and rewinding of fan motor with appropriate size super enameled copper wire approx 200 gram including insulating material such as illumines paper, letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of the department for the following Fans:- Make of winding wire: Atlas/Finolex/ Devi Dayal

All as per item No. 81 above but rewinding of motor of exhaust fans of 225/250 mm sweep with 170 gram winding wire complete all as specified and as directed at site..

All as per item No. 81 above but rewinding of motor of exhaust fans of 300/400 mm sweep with 200 gram winding wire complete all as specified and as directed at site..

All as per item No. 81 above but rewinding of motor of air circulating fan of 400 mm sweep with 300 gram winding wire complete all as specified and as directed at site..

All as per item No.81 above but rewinding of motor of pedestal fan of 400 mm sweep with 400 gram winding wire complete all as specified and as directed at site..

Disconnecting, taking down & removing carefully the existing Geyser of any capacity from any position/locations for repairs / fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the geyser, hanging/fixing the repaired geysers in position, connecting to existing electric sources and testing at site to the entire satisfaction of the department complete all as specified and directed. Note:- (i) The replacement of defective/ nonfunctional parts shall be measured & paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item. (ii) The rates for above items are deemed to include transportation charges from E/M store yard to workshop and vice versa.

S&F in replacement heating element of 1.5KW any type as per sample ISI marked complete all as specified and directed.

S&F in replacement heating element of 2.0KW any type as per sample ISI marked complete all as specified and directed.

Supply and replace complete Geyser assembly as per exisiting sample including rubber washer and nuts & bolts suitable for water heater capacity 25 Ltrs of any make.

M&L for repairing leakage of inner copper tank of geyser (any make) 25/50 litres capacity by brazing including all necessary denting etc complete all as specified and directed

S&F in replacement thermostat suitable for 25 Ltr geyser complete all as specified and directed.

S&F in replacement thermostat suitable for 50 Ltr geyser complete all as specified and directed.

S&F in replacment PVC pipes of 450mm long best quality, heavy duty for geyser of 15mm dia with brass connecting nuts/couplers complete all as specified and directed.

S&F in replacment indicator lamps red and green colour 230 volts 50 Hz AC supply complete all as specified and directed.

Supply & and Fix in repairs BLDC ceiling fan PCB Controller Kit along with speed control Remote 1 N with suitable AAA battery 2N , complete all as specified and directed .Make : Havells Model : Efficiecia Prime (Note : Old retrieved fan shall be deposited to EM store yard.

S&F in repairs rechargeable 12 W LED light with frosted PC cover and pull cord complete all as specified and directed.

S&F recess mounting LED luminaire round shape 12 watt, 230 volts for ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make:- Havells Cat part No. INTEGRAHED LR12W LED840S or equivalent in Bajaj /CG.

S & F in repairs LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F MCCB, 4 pole, 63 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 100 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F MCCB, 4 pole, 125 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

Supply only in replacement ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

Supply only in replacement Call bell ding dong, AC single pole 240 volts complete all as specified and directed.

Supply only in replacement lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply only in replacement Starter for tube light 36/40 watt, 240 volts complete all as specified and directed.

Supply only in replacement LED tube rod 18/20 watt (4ft), 240 volts complete all as specified and directed.

Supply only in replacement lamp LED 18/20 watt, 240 volts complete all as specified and directed.

S&F in replacement of ceiling fan rod by 10" 'Gold Life or equivalent' smart MS down rod (anti suicide fan rod) white colour for ceiling fans of any size and make complete all as specified and directed.Make: Gold Life Smart Fan down rod HSN/SAC code 8414 or equivalent as approved.

Unitech India (BID ID -3350397)

M/s A.K Construction (BID ID -3351009)

Vijay Electricals (BID ID -3352613)

M/s R.S. Enterprises (BID ID -3360232)

Comfort AC and Refg. Engineers (BID ID -3358772)

Sanjai sales and services (BID ID -3347634)

SALUJA CONSTRUCTION CO (BID ID -3359783)

Hindustan Power Corporation (BID ID -3345531)

BHARAT ELECTRICALS (BID ID -3353063)