Strengthening of the parking lot in front of the Honble Ministers Govt. Residential quarter No.M-1 at Ministers colony, Dispur, Guwahti-6. (Part-II)

Amount

Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soi

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soi

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing packing, rolling rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. WBM Grading 2, By Manual means

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for, Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge), Granite stone of any colour and shade

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Supplying and painting of Aessthetic Paint -black Ficus (Size 450mm ) on landscap ground inclding the preparation of the pit removing unwanter debrises, filling the pit with manure and fertilizers as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed.

Supplying and painting of Aessthetic Paint -London pine (Size 1350mm ) on landscap ground inclding the preparation of the pit removing unwanter debrises, filling the pit with manure and fertilizers as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed.

Supplying and painting of Aessthetic Paint -Tali Palm (Size 2400mm ) on landscap ground inclding the preparation of the pit removing unwanter debrises, filling the pit with manure and fertilizers as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm

Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia

Supplying of Decorative Pole 5 Mtr. Pole Ornamental 5000m Decorative cast aluminium pole having cast aluminium base with 40W LED light with its having a service window at bottom comprising 4 way connector and MCB for loop in all loop out arrangement as specified and directed by the Deptt. POLE ZIG ZAC 5 MTR.

Supplying of Decorative Decorative LED fixture aluminium die casting glass diffuser , black colour IP43 as specified and directed by the Deptt. Monaco

Supplying of Decorative Decorative Die cast alumiium housing , transparent tempered glass diffuser, IP54 as specified and directed by the Deptt. Illumine LSPK05R112XW

Supplying of 10 sq.mm 4 core armoured cable as specified and directed by the Deptt. 10sq.mm 4 core Armoured (Havells/RR Kable/Phinolex etc.)

Supplying of 120.0 sq.mm 3.5 core armoured cable as specified and directed by the Deptt. 120 sq.mm 3.5 core Armoured (Havells/RR Kable/ Phinolex etc)

Supplying including installation commssioning of vermin and dust proof totally enclosed Phosphatised powder painted cubical outdoor type double door floor mounting compartmentalize panel board of size 1.25 M x 0.70M x 0.40 M made of 16 SWG 1.66 m thick C.R. sheet and 35mm x 35mm x 5mm size angle having 4 no legs at teh bottom and C.R. sheet rooding and the top . The panel board is to be erected in 1:3:6 PCC foundation including excavation of trench and brick soling etc. completed neatly wiring done with provision for one no 250A 4 pole 415V MCCB of switch Fuse unit as incomer and provision for 2 nos. DP or TPN out goining as specified and directed by the deptt. confirmig to IP 65 protection comprasing of the following electrical item.

Supplying 25 sq.mm 4 core armoured cable as specified and directed by the Deptt. 25 sq.mm 4 core Armoured (Havells/RR Kable/ Phinolex etc)

Supplying of street light Panel maximum load 6 Kw. Astronomical Timer 32A TP Contactor 40 ATPN MCB as specified and directed by the Deptt. Stree light Panel maximum load 6 Kw.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

M/S Natraj Commercial (BID ID -280251)