Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹18.0 L+₹43,645 (2.48%)Rejected-Finance NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance DUE TO OTHER THAN L1 | |
| 3 | L3₹18.2 L+₹58,122 (3.31%)Rejected-Finance | L3 | Rejected-Finance DUE TO OTHER THAN L1 | |
| 4 | L4₹19.9 L+₹2.3 L (13.1%)Rejected-Finance C O ADNEEDS ENTERPRISES TIRAPGATE TIRAPGATE LEKHAPANI TINSUKIA ASSAM 786182 UDYAM AS 26 0000077 | TINSUKIA | ASSAM | 786182 | L4 | Rejected-Finance DUE TO OTHER THAN L1 | |
| 5 | L5₹23.0 L+₹5.5 L (31.1%)Rejected-Finance KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L5 | Rejected-Finance DUE TO OTHER THAN L1 |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
23 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
SPECIAL REPAIR TO BLDG NO T-10 AND T-11 IN ZONE VI AT LEKHAPANI
2023_MES_615909_1
8757/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
9 documents required · 9 mandatory
₹500
GE LEKHAPANI
₹36,000
Yes
25 Oct 2023
26 Aug 2023
30 Sept 2023
26 Aug 2023
23 Sept 2023
9 Sept 2023
Amount
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces and removing from site of work complete all as specified and as directed by Eng-in-charge.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0sqm each and making good to disturbed surfaces and removing unserviceable materials from site of work complete all as specified and as directed by Eng-in-charge.
Taking down roof trusses, coupled rafters or trussed beams of clear span upto 4 mtrs complete all as specified and as directed by Eng-in-charge.
S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
M&L PCC (1:3:6), type C-1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts, filling in pressed steel door frames , benching slightly rounded or chamfered angles & throating etc including necessary use and waste of form work complete all as specified and directed.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded,etc complete all as specified and as directed by Eng-in-charge.
S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & fixed to chowkats complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each pane complete all as specified and as directed.
S&F Framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified and directed.
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and directed.
S&F 250 mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F 150 mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed.
M&L Preparing new wood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L Preparation of new or previously un treated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings,etc complete all as specified and as directed by Eng-in-charge.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed by Eng-in-charge.
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S&F Structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.
S&F Structural steel work in hollow square/rectangular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 4923 -1997 (Reaffirmed 2009) grade Yst.-310 complete all as specified and directed.
S & F Mild steel bolts with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long and diameter of neck exc 12 mm and n.exc 20 mmcomplete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof ridges, eaves boarding etc. covering/cladding to wall, fixed with self tapping screws with bitiman washer complete all as specified and as directed.
Use and waste of form work to sides and soffits of lintels over 1.5m clear span, floor or roof beams, cantilevers, etc for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L Providing RCC (1:1 1/2:3) type A-1 (using 20mm nominal size graded crushed stone aggregate) as in beams, cantilevers, bressumers,lintels over 1.5m span etc.complete all as specified and directed.
M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
All as per Item No.25 above but 6 to 8 mm dia complete all as specified and directed.
All as per Item No.25 above but 6 to 10 mm dia as in stirrups,spacers and binders,etc complete all as specified and directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed by Eng-in-charge.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles,removing debris beyond the premises, complete all as specified and as directed by Eng-in-charge.
M&L Brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in cement mortar (1:4) as in half brick thick walls complete as specified and directed.
M & L Brick work with subclass “B” Old size bricks, straight or curved on plan,exceeding 6 m mean radius, built in CM (1:6) complete all as specified and directed.
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finished fair and even complete all as specified and directed.
M&L Prepration of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L Preparation of newly plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed.
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level),removing debris beyond the premises complete all as specified and as directed by Eng-in-charge.
M&L for Glass dividing strips, 3 mm thick 38mm wide and inserted in position, conform to design complete all as specified and directed
M&L for 40 mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in floors, finished even and smooth, using extra cement complete all as specified and directed.
M&L for 50 mm thick PCC (1:3:6) type C-2, (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified and directed.
Taking down copper/aluminium point wiring, (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed by Eng-in-charge.
M&L for providing point wiring for controlled by one switch with using 1.50 sq.mm (nominal area), stranded copper conductor, single core PVC insulated FRLSH unsheathed cable (Maintaining Colour Code) 1100 volts grade with and including PVC casing and capping of suitable size including PVC accessories / fittings and fixtures fixed on surface with using new PVC board or sunken type pressed steel box of adequate size, terminal boxes for mounting fittings/junction boxes with and including all accessories and using 1.5 sq.mm (nominal area), stranded copper conductor, single core PVC insulated FRLSH unsheathed cable green in colour as in earth continuity conductor connected to common earth dolly and connecting upto fittings for one light/fan point controled by one one way 5 Amp switch complete all as specified and directed. NOTE: The quoted rates shall be inclusive for fixing casing caping to surface with using PVC raw plugs and provision of PVC boards/terminal/junction boxes of any shape and size.
All as per Item No.41 above but one 5 pin socket outlet 05 Amp on independent board,complete all as specified and directed
All as per Item No.41 above but one 5 pin socket outlet 05 Amp on same board, complete all as specified and directed
All as per item No 41 above, for one 15 Amps socket outlet but using 2.5 sq mm, copper conductor with 2.5 sq mm, PVC insulated single core cable for earth continuity conductor.complete all as specified and directed
S&F Switch piano flush button, single pole, one way 5 Amp complete all as specified and directed.
S&F Socket outlet, 2 in 1, 5 pin 5 Amp flush type complete all as specified and directed.
S&F Switch socket combination 2 in 1, 2 and 3 pin 5 Amp flush type complete all as specified and directed.
S&F Switch socket combination, 5 in 1, multipurpose 5/15 Amps flush type universal complete all as specified and directed.
S&F Ceiling fan regulator, electronic type, step type speed A/C, 230 volts complete all as specified and directed.
S&F MCB single pole (SP) 6 to 32 Amp 240 Volts 10 KA 'C' series with all incoming/outgoing connection with proper size lugs including taking down old unserviceable complete all as specified and directed.
S&F MCB single pole and neutral (SP&N) 32 Amp 240 volts 10 KA 'C' series with all incoming/outgoing connections with proper size lugs including taking down old unserviceable, complete all as specified and directed.
S&F Single pole and neutral DB wall mounting type, 240 Volts, 8 Way with 200 Amps rated bus bar, double door suitable for fixing MCB's including connecting etc and taking down old unserviceable DB ,main switch complete all as specified and directed.
S&F Ceiling rose, 3 terminals, surface bakelite, /PVC/Polycarbonatecomplete all as specified and directed.
S&F LED tube light fitting 4 ft. 1 x 18/20 watt with 230 volts, complete with all accessories internally pre-wired and fixed to walls/ceiling with screw including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old unserviceable light fittings complete all as specified and directed.
S&F LED building security light fitting 1 x 35 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP 65 protection incl mounting bracket of suitable size and connection including taking down old unserviceable light fittings complete all as specified and directed.
S&F Fan hook made of 10mm dia TMT Bar for for hanging the ceiling fan complete all as specified and directed by Engr-in- charge
M&L Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways and testing on completion,complete all as specified & directed by Engineer-in-Charge.
Excavation in trenches not exc. 1.5 m deep and not exc 1.5 m wide for taking up/laying of under ground cable/pole and stay foundation,etc and getting out in soft/loose soil complete as specfied and as directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specfied and as directed.
Removing surplus soil to a distance not exc 50 meter and depositing where directed at a level not exc 1.5 meter above the starting point complete all as specified and as directed.
M&L for brick protection over cables inside the trench by using common burnt clay building bricks,sub-class"B" laid dry and flat and width wise along the axis of the trench complete all as specified and as directed by Engineer-in-Charge.
M&L for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complet all as specified and directed by Engr-in-Charge. Note: Punned thickness shall be considered for payment.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete including taking down old un serviceable cable complete all as specified and as directed.
Supply and laying 40 mm dia GI tubing (light grade) with all fittings (ISI Marked) laid in trenches/fixed on pole/wall including taking down old unserviceable GI pipe complete all as specified and as directed.
M&L Boring of holes by using trenchless technology under road, pavement, hard standing by for passing the cable through GI pipe complete all as specified and directed by Engr -in-Charge. Note: GI pipe shall be measured and paid seperately.
MAA COMMUNICATION
RC CONSTRUCTION
ADNEEDS ENTERPRISE
M/s NARAYAN MUKHERJEE & CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .