Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
17 Oct 2023, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
INVITATION FOR EXPRESSION OF INTEREST EOI FOR INDIGENISATION OF ASSEMBLY SLIP RING FOR ALTERNATOR OF JAGUAR AIRCRAFT UNDER HAL MAKE II PROCEDURE
2820
HAL/ADL/INDG/INST/ALT/SLIPRING/2023
IMM
Unknown (Unspecified Location)
17 Oct 2023
18 Sept 2023
18 Sept 2023
17 Oct 2023
HINDUSTAN AERONAUTICS LIMITED
(A Govt. of India Enterprise Under Ministry of Defence)
Accessories Division, Faizabad Road, Lucknow-226016, UP - INDIA
PRICE DETAIL TO BE MENTIONED IN THIS SHEET ONLY AND NOWHERE ELSE IN TENDER.
Note: Rates to be mentioned in Numeric Value and Taxes & Charges if any to be mentioned in Percentage
Temder/Enquiry No. : HAL/ADL/INDG/INST/ALT/SLIPRING/2023 PRICE BID
Supplier /Company Name
Sl. No. Part Number Part Description Qty (Nos) Unit Price without any GST orTaxes (INR) Total Price without any GST or Taxes (INR) Taxes (GST/ IGST etc) EXTRA in % Packing/ Forwarding in % (Extra , If Applicable) Freight in % (Extra , If Applicable) Any other charges in % (Extra , If Applicable) Description of Charge mentioned in Column (K) Total Amount Including Taxes and all ( H+I+J+K) Remarks
1 613090008-114 / 613090008-114 (LD) ASSEMBLY SLIP RING Estimated Unit Price (Rough order of magnitude) inclusive of amortized design & development and other cost. 5
1. Supplier is requested to fill information in the required cells which are highlighted in COLOR
2. Kindly note that HAL does not entertain Fax/ Email quotations unless otherwise specifically requested by us in our RFQ.
3. For general correspondence other than submission of quotations on portal kindly make use of the (E-mailID):[email protected]
Technical Compliance Matrix
Ref. : HAL/ADL/INDG/INST/ALT/SLIPRING/2023
EOI FOR INDIGENISATION OF ASSEMBLY SLIP RING FOR ALTERNATOR OF JAGUAR AIRCRAFT
Sl. No. EOI Ref No. Description Requirement Vendor's Remark
1 3.1 Project entails indigenous design, development and manufacture of Assembly Slip Ring for use in Alternator of Jaguar aircraft. Essential
2 3.2 Draft specifications for Assembly Slip Ring are detailed in “Annexure A” along with its provisional drawing. However, for better understanding of Assembly Slip Ring, awarded vendor may collect sample from HAL, Lucknow. Essential
3 3.3 Final qualification test requirement shall be evaluated during development process in co-ordination with approving agency & Indigenization committee at HAL, Lucknow. Essential
4 3.4 Material used for manufacturing of Assembly Slip Ring should be airworthy and COC (Certificate of Conformance) of material used should be available whenever it is required for verification. In case any alternate material is proposed by the vendor then also the material should be airworthy and manufacturing of Assembly Slip Ring should be done after taking approval of material substitution by regulating authorities. Essential
5 3.5 Material Proposed by vendor for manufacturing of Assembly Slip Ring should be filled in the chart below: SL# Part Original Material Proposed Material 1 Varnish Poltmide Varnish (Rhodeftal-210ES) 2 Moulding Compound Micaver 3 Collecting Ring Industrial Bronze NS5 4 Wire Not Known 5 Hub Half hard steel XC38f 6 Other parts Not Known Essential
6 3.6 The Initial estimated volume of Assembly Slip Ring for 03 years is around 120 Nos. However, this requirement is arrived considering the stock available & pending purchase orders, so once the existing BOF stock is consumed the requirement of these items will increase and Assembly Slip Ring will be required for entire life of aircraft subjected to the customer order. Essential
7 3.7 Once the product is successfully developed and production clearance / type approval is received from CEMILAC, the production order will be placed on successful development agency. It is to be noted that development shall be as per HAL Make-II procedure (refer HAL MAKE-II Procedures provided on HAL website). Essential
8 3.8 Time line for manufacturing and certification of Assembly Slip Ring should not be more than 12 months. Essential
9 3.9 Assembly Slip Ring should be identical in form, fit and function with the existing Assembly Slip Ring. The weight of the Assembly Slip Ring should not be more than that of BOF. Essential
10 3.1 All necessary design documents required for airworthiness certification including drawings, material test certificate, manufacturing process layouts etc. shall be prepared by the developing agency (DA) and approved by airworthiness agency as applicable. However, Indigenization Committee at HAL, Lucknow will co-ordinate between DA and airworthiness agency. Essential
11 3.11 The vendor shall do necessary procurement along with COC (Certificate of Conformance) traceable to OEM as per approved document. Essential
12 3.12 The development procedure and Airworthiness Certification (Type Approval / Production Clearance) of Assembly Slip Ring shall be as per latest version of IMTAR. Essential
13 3.13 All development activities shall be done by vendor in co-ordination with RCMA, ORDAQA and HAL Indigenization / QC as defined in latest version of IMTAR-21 & AFQMS Essential
14 3.14 Vendor on which PO is placed shall manufacture the Assembly Slip Ring based on the Drawings, draft specification & samples collected from HAL, Lucknow (refer para-3.2). Vendor shall provide its compliance to Scope of Project given at para – 3. Essential
15 3.15 Vendor shall provide 05 Nos. of Assembly Slip Ring (Free of Cost) for end use testing as per the test procedures finalized by regulating authorities. Essential
16 3.16 Vendor shall absorb any minor changes in test requirements, if encountered during reviews, integration and certification of the Assembly Slip Ring to meet the requirement. Essential
17 3.17 Vendor shall absorb any minor changes in test requirements, if encountered during reviews, integration and certification of the Assembly Slip Ring to meet the requirement. Essential
18 3.18 Vendor shall commit for trouble free and obsolescence free supply of Assembly Slip Ring for next 20 years. Essential
19 4.1 Only Original Equipment Manufacturer (OEM), with proven expertise in manufacturing of similar items are requested to participate in the EOl. Essential
20 4.2 Prior experience- The vendor should be with full knowledge in the field of manufacturing and supply of similar item / system. Vendor should have developed /supplied in last 5 years same /similar /advanced specification type items. Desirable
21 4.3 Details of similar projects (if any) completed by vendor including contact addresses of the existing customers should be provided (necessary documentary proof shall be provided). Desirable
22 4.4 If vendor has any dealing with Indian Air Force for similar items, the same shall be provided with contract / P.O. details. Desirable
23 4.5 Vendor shall define quantitatively amount of import (if to be used) in development and indigenous content for Assembly Slip Ring, t should not be less than 50% by value. Vendor has to provide a self-declaration in this regard. HAL team may verify the documentary evidence to confirm the given indigenous contents after scrutiny. Essential
24 4.6 Vendors shall confirm that they have read and understood the HAL Make-II Procedure as provided on HAL website and would abide by the procedure and condition stated therein. In case of any ambiguity between EOI document and HAL Make-II procedure, HAL Make-II procedure will be the final. Essential
25 4.7 The prospective vendor should provide details of manufacturing facilities, details of current capabilities (technical expertise) related to design, manufacture, certification and supply of the proposed items. Essential
26 4.8 The prospective vendor should have AS9100 rev D accreditation (please attach supporting document). Desirable
27 5.1 Based on the Technical evaluation of EOI responses received, HAL will evaluate the vendors based on the Compliance of EOI T&C. Essential
28 5.2 For Technical evaluation, following documents to be submitted by vendors: -Compliance Sheet for acceptance of Scope of Project/ Technical Terms and conditions & eligibility criteria as specified in EOI(refer Annexure-C) -Support documents for submission as mentioned in EOI. Essential
29 5.3 HAL may visit the vendor’s place for audit purpose during vendor evaluation based on the EOI responses. Desirable
30 5.4 Maximum one or two vendors will be shortlisted at the EOI stage in two bid system. So as part of EOI, vendors are required to submit fully amortized ROM price (unit price at production stage including amortized cost of Design & Development, including all taxes and duties) as separate bid. Vendor will be selected on the basis of full Technical Compliance & lowest ROM price. Essential
31 5.5 Vendor's credential: i) Detail of Business Establishment-Certificate of incorporation, Memorandum of Association under companies Act 1956/partnership Deed etc ( As applicable). ii) In case of proprietary Company/Public Partnership Company where firm registration is not mandatory, full address of office and proof thereof certified from notary. iii) Copy of PAN and GST registration required. Essential
32 6.1 The Scope of Project for Indigenisation of Assembly Slip Ring as per para 3 is only tentative in nature and are subject to change. This may be considered only as advance information for market exploration. a) HAL will freeze the technical scope based on response to this EOl and as deemed necessary at the time of issuing RFP (Request for Proposal) at HAL’s discretion. b) Compliance against each requirement of para 3 of this document (Scope of Project) and para 4 of this document (Evaluation Criteria) should be provided in a matrix form by the vendor in the technical offer (refer Annexure-B) Essential
33 6.2 The potential vendor can propose suitable and proven solution to meet HAL’s EOl requirements. Desirable
34 6.3 This document is not intended to form the basis of any decision to purchase / finalize contract and it does not constitute an offer or invitation or solicitation of an offer to purchase. Essential
35 6.4 Based on the evaluation of EOI proposals received, HAL will finalize Technical Specification/ Drawings of Assembly Slip Ring and float Request for Proposal (RFP) at HAL’s discretion. Essential
36 6.5 Selected Vendor has to get registered at HAL Lucknow before the placement of Order and will have to provide all the necessary documents as required. If vendor is already registered in any other division of HAL for similar activity, Vendor registration letter issued by the division will be required for registration at HAL Lucknow. Essential
37 6.6 Minimum following documents are required to be submitted by respondents a) Technical Offer b) Budgetary offer – ROM(Rough Order of Magnitude) Cost for Design & Development and Production unit separately along with all Taxes & duties c) Documents in proof of evaluation criteria. Essential
38 7.1 Please submit your response along with documents stipulated in the EOI uploaded on e-portal. Response to bid through e-procurement should be uploaded in the e-portal only. Essential
39 7.2 Responses submitted in any other form, such as courier/ post/ in-person/ fax/ telegram/ telex, shall not be accepted against this EOI. No hard copy of the offer is to be sent. The detailed technical literature is to be uploaded in PDF format. Essential
40 7.3 Bidders are advised, in their own interest, to ensure that their responses/ bids are submitted well before the "Due Date & Time of Bid/response-Submission" of the EOI as HAL's "e-Procurement System" at -https://eproc.hal-india.com will not allow submission of bids once the closing date and time of the Tender (i.e. Due Date & Time of Bid-Submission) is reached. Essential
41 7.4 HAL shall not be responsible if bidder is not able to submit the bid on account of failure in network / internet connection at bidder's end. Essential
42 7.5 A company can submit only one response. Essential
43 7.6 Bid shall be opened as per schedule indicated on e-portal. The date fixed for opening of bid, if subsequently declared as holiday, revised date of schedule will be notified. However in absence of such notification, the bid will be opening on next working day at same time. Essential
44 7.7 The Competent Authority reserves the right to reject any or all the bids/responses without assigning any reason and the decision of the competent authority of the Accessories Division, Hindustan Aeronautics Limited, Lucknow shall be final and binding. Essential
45 7.8 This EoI is being invited with no financial commitment on part of HAL. HAL reserves the right to withdraw or change or vary any part thereof at any stage. HAL also reserves the right to disqualify any company should it be so necessary at any stage on grounds of national security. Essential
46 7.9 Bidder would be disqualified if they make false, incorrect, or misleading claims in their response to this EOI. Essential
Bidder's Company Name & Signatory
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
AnnexureASpecifications.pdf
TENDER_DOCUMENT • 1.59 MB
AnnexureBPriceBid.xls
TENDER_DOCUMENT • 0.03 MB
AnnexureCTechnicalComplianceMatrixSlipRing.xls
TENDER_DOCUMENT • 0.04 MB
AnnexureE.pdf
TENDER_DOCUMENT • 0.19 MB
AnnexureF.pdf
TENDER_DOCUMENT • 0.35 MB
EOISLIPRING.pdf
TENDER_DOCUMENT • 0.65 MB
ImportantInstructionWebTender.pdf
TENDER_DOCUMENT • 0.07 MB
Mandatory Document.docx
TENDER_DOCUMENT • 0.01 MB
specification Modified(Annexure-A).docx
TENDER_DOCUMENT • 1.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .