Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹12.5 L+₹3.9 L (44.8%)Rejected-Finance RAMA PARK A 121 BLOCK A UTTAM NAGAR WEST DELHI DELHI 110059 | DELHI | WEST DELHI | DELHI | 110059 | L2 | Rejected-Finance other than lowest | |
| 3 | L3₹13.5 L+₹4.9 L (56.6%)Rejected-Finance WZ 576 577 NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance other than lowest | |
| 4 | L4₹14.5 L+₹5.9 L (68.3%)Rejected-Finance | L4 | Rejected-Finance other than lowest | |
| 5 | L5₹14.9 L+₹6.3 L (73.0%)Rejected-Finance G 86 DATA RAM SECTOR 18 ROHINI NEW DELHI DELHI 110085 | NORTH WEST DELHI | DELHI | 110085 | L5 | Rejected-Finance other than lowest |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
18 Aug 2020, 6:00 pmClosed
GE (N) DELHI CANTT-10
GE (N) DELHI CANTT-10
REPAIRS MAINT OF INTERNAL ELECTRIFICATION WORK INCL REPLACEMENT OF FITTINGS FIXTURES DBS OF MD AND OTM ACCN INCL MAP JCOS ORS MD ACCN AT ANAND PARBAT UNDER GE N DELHI CANTT
2020_MES_365191_1
GE/NORTH-34/2020-21
Open Tender
Civil Works
Works
180 days
GE (N) DELHI CANTT-10
as per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (N) DELHI CANTT-10
₹30,000
Yes
11 Sept 2020
29 Jul 2020
19 Aug 2020
29 Jul 2020
18 Aug 2020
11 Aug 2020
Amount
Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete
Taking down unserviceable main switches, DBs,metal enclosure boxes,bus bars chambers etc from wall / existing main boards and removing from site complete
M&L for point wiring with single core FRLS, PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) drawing through existing conduit pipe including replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete for the following :-
(a) One light point controlled by one switch
(b) One ceiling/exhaust fan point controlled by one switch
(c) One socket outlet 5 Amps controlled by one switch on same board
(d) One socket outlet 5 amps controlled by one switch on independent board
(e) One bell point controlled by one bell push switch
All as per item No 3 above but wiring with 2.5sqmm copper wire and 1.5sqmm earth wire for socket out let 16 Amps on independent board
All as per item No 3 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor
M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories,GI metal flush box of 1.60 mm thick suitable for modular/conventional type switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-
(a) One light point controlled by one switch
(b) One ceiling/exhaust fan point controlled by one switch
(c) One socket outlet 5 Amps controlled by one switch on same board
(d) One socket outlet 5 amps controlled by one switch on independent board
(e) One bell point controlled by one bell push switch
All as per serial item No 6 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.
All as per item No.6 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor
M&L for point wiring surface type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC conduit/caping casing of 20mm dia or higher, medium grade complete with all PVC conduit accessories,GI metal flush box of 1.60mm thick suitable for modular/conventional type switches/sockets/ fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the following :-
(a) One light point controlled by one switch
(b) One ceiling/exhaust fan point controlled by one switch
(c) One bell point controlled by one bell push switch
(d) One socket outlet 5 amps controlled by one switch on independent board
(e) One socket outlet 5 Amps controlled by one switch on same board
All as per serial item No 9 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire.
All as per item No.9 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor
S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts complete
S&F Switch piano flush type 15/16 A single pole one way 230 Volts complete
S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volt complete
S&F Socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type 230 Volts complete
S/F Bell push, flush type 5 Amps 230 Volts complete
S&F electronic fan step regulator flush type 120 watt, 230 Volt complete
S&F ding dong bell, AC, 230 volts, single pole complete
S&F lamp holder, 230 volt AC, PVC / Polycarbonate type of angular shape with back plate suitable for batten fittings complete
S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete. Note for item No.12 to 20:- Make - Anchor/Cona/SSK/Havells
S&F modular switch 6 Amps, one way, one module 240 volts complete
S&F modular socket, 3 pin 6 Amps,240 volts, 2 module complete
S&F modular switch 16 A, 1 module,240 volts complete
S&F modular socket 6/16 A, 5 pin, 2 module, 240 volts complete
S&F modular Bell push 6 Amps, one module 240 volts complete
S&F modular fan regulator, step type, 120 W, humfree, AC, 230 volts, 2 module complete
Supply and fixing Modular type 25 Amps capacity starter type 2 module type for AC plug unit complete.Note for item No. 21 to 27 :- Make- Anchor (Roma)/ Legrand/ Schneider/ Crabtree
S&F sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps complete. (Make- Indo asian/Havells/ Legrand/ABB)
M&L in repair for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area 1100 V,stranded copper conductor, multistranded, and one single core green PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete
All as per above item herein before but with 6 sqmm two runs and 4 sqmm one run as earth wire
All as per above item herein before but with 4 sqmm four runs and 2.5 sqmm one run as earth wire Note: Make of PVC wire & PVC conduit - Finolex/Plaza/Polycab/Anchor/Havells.
S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following :-
S&F of factory made distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable complete
S&F of factory made distribution box 8 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable complete
S&F of loadline distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB 63/100 Amps as incomer and MCB SP as out going complete
S&F of loadline distribution box 8 way, AC, TP & neutral metal enclosure, glazed double dooor, 415V AC, IP-43, concealed type with IP-43 protection complete with suitable bus bar, neutral link, earth link suitable for MCCB 125/160 Amps as incomer and MCB SP as out going all as directed.
S&F in repairs for MCB TPN, 240 Volts, AC, 63 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete
S&F in repairs for MCB TPN, 240 Volts, AC, 40 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete
S&F in repairs for MCB, DP/SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete of following rating :-
(a) 63 Amps
(b) 40 Amps
(c) 16 to 32 Amps
S&F in repairs for MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete
S&F in repairs for MCCB 2 Pole, 240 volt, AC, fixed type,32 Amps, 16 kA, suitable for load line DB/LT PB connection complete of following rating :-
S&F in repairs for MCCB 4 Pole, 415 volt, AC, fixed type, suitable for load line DB/LT PB connection complete of following rating :-
(a) 63 amps, 25 kA
(b) 100 amps, 25 kA
(c) 125 amps, 25kA
(d) 200 amps, 25kA
S&F in repairs for MCB 32 amps DP with 30 mA, 10 KA, RCBO,IP 20, Dual on position DIN clip type complete all as specified.
S&F in repairs for MCB 40 amps FP with 30 mA, 10 KA, RCBO,IP 20, Dual on position DIN clip type complete all as specified.Note fot item No. 32 to 44:- Make :- Havells/ Indo asian/Legrand/ABB
S&F in repars for blank plates for MCB space in any type of DBs complete
Supplying and laying in replacement or fixing or passing through pipe, 1100 volts grade PVC insulated aluminium stranded conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circuler for the following size of cables :-
(a) 6 Sqmm
(b) 10 Sqmm
S&F in repair of 3mm thick plastic laminated sheet cover with brass screws , cup wahser and cutting of grooves for switchs,scoket and regulator etc complete for following sizes.
S&F in repairs of rigid non metalic 25mm dia PVC conduit with all ftgs(tees,bends,elbows,reducers, bell mouth,saddles,pipe hooks) complete.
S&F in repairs of GI flexible conduits 25mm dia with check nut and clamps and accessories complete.
S & F LED Batten type fitting for surface/wall mounted 20W,230V,6500K integrated electronic driver completely pre wired, LED 4 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed. (Make- Havells cat part no- LUMILINEBS20WLED865SPCWH/ Phillips cat part- BN021C LED20S PSU CW GR S2/ Wipro cat part no- LL20221XXX65NE3)
S & F LED Batten type fitting for surface/wall mounted 9W,230V,6500K integrated electronic driver completely pre wired, LED 2 feet fitting with polycarbonate housing & integrated electronic driver complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed. (Make- Havells cat part no- LUMILINEBS9WLED865SPCWH/ Phillips cat part no- BN 021 LED10S- 6500 PSU GR S1/ Wipro cat part no- LL20111XXX65NE3)
M&L for the remove the existing 36/40W tube light fitting batten and refixing the LED type batten up to 1x22 W single sided connection for fixing of LED type tube rod 18 to 22 W , 230V , and necessary internally pre-wired with suitable size copper flexible wire , screws , gutties etc.and removing the UNSV fitting all as specified and directed complete. (Make- REGAL 1x22WSSBSWH of Havells or equivallent in Philips/Wipro)
M&L for the remove the existing 36/40W (T-8 type) tube rod and fixing the Energy efficient LED tube rod 20 W, 230V, Polycorbonate tube light, single side connection and necessary internally pre-wired with suitable size copper flexible wire and remove the UNSV choke and starter and including connecting up with suitable size copper flexible wire ,screws,gutties etc. complete all as specified and directed. (Make- PHOTON 20W LED 865SPC of Havells or eqivallent in Philips /Wipro)
S&F surface mounted LED panel type 36W,230V,5700K complete with driver full window glarefree opal diffuser LED panel of size 2ftx2ft with CRCA powder coated white housing, CDL/Warm type illumination complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed. (Make- Havells cat Part No- PLUTOSURFACE2X2PLS36WLED857S/ Wipro cat part No- CRCO10R038HP57GL1 / Phillips Cat part no- SM365C LED32-6500 PSU OD WH)
S&F recessed type LED panel type 36W,230V,5700K complete with driver full window glarefree opal diffuser LED panel of size 2ftx2ft, suitable for exist false ceiling with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed. (Make-Havells cat Part No- HERCULES 2X2PLR36W LED857S/ Wipro cat part No- CRCO10R038HP57GL1 / Phillips Cat part no- RC380B LED36S -6500 G4 L60 W60 PSU OD WH OC)
S&F Indoor Decorative wall light fixture suitable for 15 W LED lamp,230V for soft light ambiance, plastic diffuser with painted CRCA bracket, B22 lamp holder used,cylindrical shape, fixed on wall with the help of screws incl LED lamp 15W and remove the UNSV fittings and all as specified and directed. (Make- Havells LHFHASE1TL1W015 or equivallent in Philips/Wipro)
S&F lighting fixture wall mounted LED bulk head luminaire 10W,230V, made of die cast aluminium with opal diffuser IP 65, complete with mounting Brackets & accessories as required with connections and remove the UNSV fittings and all as specified and directed. (Make- Havells/Philips/Wipro)
Supply and fixing LED bulb 9W inverter type upto 4 hrs back up, 6500K and remove the UNSV bulb and all as specified and directed. (Make- Halonix/Philips /Havells)
M&L for the remove the existing 28 W (T 5 type) tube rod and fixing the Energy efficient LED tube rod 18 W, 230V, Polycorbonate diffuser housing,Double side connection, with LED driver out side type, incl and necessary internally pre-wired with suitable size copper flexible wire and remove the UNSV choke, and starter and including connecting up with suitable size copper flexible wire, holders, screws,gutties etc. complete all as specified and directed. (Make- TITANIASLEEK 1149T5DSTL18WLED865SPC or equivallent in Philips/wipro)
Supply and fixing Indoor recessed/surface type mounted LED luminaires round/square type light weight plastic body downlight fitting 12 Watt, CDL/Warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed. (Make- Philips /Havells/ Wipro)
Supply and fixing Indoor recessed/surface type mounted LED luminaires round/square type light weight plastic body downlight fitting 5 Watt, CDL/Warm type with all accessories 3 core copper wire for connection, making good the disturbed any type of ceiling and remove the UNSV fittings and all as specified and directed. (Make- Philips /Havells/ Wipro)
S&F bldg security light LED luminaries with low wattage with pressure die cast aluminium housing, with heat resistant thoughened glass & IP 65 protection and 25 Watt with suitabe size GI pipe bracket,clamps incl taking down old unserviceable one all specified and directed.(Make-Philips /Havells/Wipro)
S&F, testing and commissioning of common area lighting panel for high rise buildings, with contactor, analog time switch, MCB rating 40 A suitable for 3 Phase 415 Volts and having over and under voltage protecction relay to protect the contactor coil, with panel locking facility, wall mounted type incl necessary cable lugs, necessary copper wirinng to connect exist TPN DB with remove UNSV DB/panel complete all as specified and directed. (Make- TL040AB0 Indo Asian or equivallent in Scheinder/Seimens/Hager)
S&F in reapirs of garden light fitting 10 watts, IP65 rated Inverted Pyramid Tripod type LED Bollard with soft 360 deg light distribution with tapping from nearest electrical point incl provn of copper wire, PVC conduit,necessary brick/PCC work finishing with fair cement for base fitting all as specified and directed. (Make :Crompton LBLSN 10 CDL or equivallant in Havells/Philips/Wipro)
S&F in passing through pipe, 10 sqmm 2 core,1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular incl taking down unsv complete all as specified and direcited.
S&F ceiling fan 400mm sweep cuboid type with built in LED light and remote controll in white colour with connection incl necessary cutting in exist ceiling of any type and depositing old fan to MES store complete all as specified and directed.
S&F electronic energy meter current rating 10-60 amps, 3x240 V, 50Hz, AC, three phase, four wire, LCD display, Class 1.0 accuracy (PPEM 01) in built CT operated as per IS-13779, made out of FR polycarbonate, dust proof, good mechanical strength incl connection and depositing old meter to MES store complete all as directed (Make- HPL/L&T/Havells)
S&F electronic energy meter current rating 10-60 amps, 240 V, 50Hz, AC, single phase, two wire, LCD display, Class 1.0 accuracy (SPEM 36) as per IS-13779, made out of FR polycarbonate, dust proof, good mechanical strength incl connection and depositing old meter to MES store complete all as directed (Make- HPL/L&T/Havells)
Schdule of Credit - 34351.00)
HANUMAN BUILDERS
Shiv Enterprises
Surjit and Sons
NEETU TRADERS (INDIA)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .