SPECIAL REPAIRS TO GODAVARI BLDG NS-105 (C AND D) WINGS AT MO (MB) GHATKOPAR

Amount

M&L roughening old concrete floor by picking , sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc out side MD land complete all as specified and directed.

M&L for double charged vitrified ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for double charged virified ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick CM 1:4 on fair faces of brick/ concrete surface as in backing coat for tiles complete all as specified

M&L for glazed ceramic coloured tiles 450x300mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:3 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed.

M&L for Non-skid ceramic tiles (Coloured) 7 to 8mm thick rectangular area of each tiles exc 0.06 sqm n exc 0.11 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 laying floor finished complete all as specified and directed

Dismantling stone slabs and tiles of any description or thickness in kitchen platform and similar work laid, bedded and pointed in cement mortar and removal of rubbish/ demolished materials out of MD land complete all as specified and directed

S&F machine cut and machine polished, green marble, 18-20mm thick on horizontal or vertical surface,as in cooking platform, window cills and jambs bedded, jointed and pointed with neat grey cement slurry and pointed with coloured or white cement with pigment to match over and including rendering coat of 10 mm thick in CM 1:4 all as specified and directed.

Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortor 1:6 complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks, straight, or curved on plan to any radius as in half brick thick wall in CM 1:4 complete all as specified and directed.

Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc.

M&L for rendering 10 mm thick on fair faces of brick work in CM 1:6 and 5mm thick in CM 1:4 including water proofing compound, finishing even and smooth without using extra cement. (WPC shall be measured and paid separately)

M&L for two coats OBD on newly plastered in wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over over two coats of wall care putty (Asian product code - 0079 or JK wall care putty / Birla white wall care putty) of 1-1.5 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed.

M&L 20 mm thick cement plaster in two coats using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering,including supply having low rebound properties, low water demand for curing properties, mechnIcal mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering,including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc. complete all as per specifications & as directed by the EIC (Note : - (i)Work shall be executed at Multiple places as per required and at any height upto five store bldg.(ii) Rate inclusive of supply and fix welded wire mesh of size 100 x 100 mm of 3 mm dia wire.

M&L for preparation of NEW plastered walls surfaces & applying two coats of chemical waterproofing treatment (601 raincoat of pidilite or equivalent) on wall & chajja, terrace & parapet wall, such as Flexcoat, Beckcoat, Exshield etc or equivalent including filling of cracks in walls/concrete with " Crack-X" of pidilite or equivalent complete as per manufactures instructions, all as specified and directed.

M&L for plastering in CM 1:3 , 5 mm thick on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coat OBD on newly plastered in ceiling surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over over two coats of wall care putty (Asian product code - 0079 or JK wall care putty / Birla white wall care putty) of 1-1.5 mm thickness prepared and sanded with electrically operated sanding machine.

M&L for preparation of old wall surface applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for two coat OBD on Old plastered in ceiling surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over over two coats of wall care putty (Asian product code - 0079 or JK wall care putty / Birla white wall care putty) of 1-1.5 mm thickness prepared and sanded with electrically operated sanding machine.

M&L for complete removal of existing surfaces including washing / rubbing down with water of wall and applying two coats of chemical waterproofing treatment (601 raincoat of pidilite or equivalent) on wall & chajja, terrace & parapet wall, such as Flexcoat, Beckcoat, Exshield etc or equivalent including filling of cracks in walls/concrete with " Crack-X" of pidilite or equivalent including preperation of OLD surfaces complete as per manufactures instructions, all as specified and directed.

M&L for for preparation of old wooden surfaces of any description or not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed.

M&L preperation of new steel Surfaces of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified

M&L preperation of old steel Surfaces of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified

M&L for preparation of wooden surfaces any description and treated with tar or coal tar black paint complete all as specified and directed.

M & L for demolition of existing kitchen platforms (02 Nos) with tiles in dado incl SS sink and (1) Provision of kitchen platform of 18-20mm thick granite(of any type) work table rubbed and polished as in jambs, pillars, door and windows-cill, cooking platform , jambs, wash basin platform and the like in cement mortar (1:4) including pointing in white / coloured cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20-25 mm cudappa slab as in platform supported by half brick wall/cudappa with tiles in dado as shown in drawing and directed by engineer in-charge. (2) Provision of prefabricated modular kitchen to two side in one kitchen with SS trolly of grade 304 complete with trolley channels, cutlery basket, plate basket , necessary handles , fittings, side by cupboards with 18 mm BWP grade marine ply doors mica finish in all side with edge binding over with granite top , ss sink with drain board of size 32'*18" , including necessary fittings and sink cock in sandwich with granite and cuddapa, necessary shelf and all necessary civil works including as shown in drawing and directed by engineer in-charge make of accessories to be used in modular kitchen -M/s Godrej, Hettich, Sleek or equivalent. (3) Supply only a set of SS baskets with fittings as in modular kitchen cabinet as per following details:- Plate basket 21'' x 19'' x8'' -1 No (ii) Plane basket 21'' x 19'' x 8''-1 No (iii) Plane basket 17'' x 19'' x 8''-1 No (iv) Butlery basket 17'' x 19'' x 4- 1 No (v) Cup & Saucer basket 17'' x 19'' x 4'' -1 No (vi) Single pull out 8''-1 No (vii) GT-PT & Drip tray 22"-01 No (viii) stainless steel telescopic channels of appropriate size as required to fix the baskets in cabinet. (Make first quality of Godrej/Sleek/ Ebco/Dolin) all as specified and as directed. Note:- Details of modular kitchen with approx dimension and pictorial view are shown in drawing for reference and final decision subject to change as per site requirement at the time of execution pertains to GE.

Resucuring or easing & adjusting, without taking down shutters of any description exc 1 Sqm and n exc 2 sqm each complete all as specified and directed.

Resucuring or easing & adjusting, without taking down shutters of any description exc 2 sqm each complete all as specified and directed.

Taking down chowkets or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frame).

As in item above but exc 1.5 Sqm and n.exc 4 Sqm each.

S & F for second class hardwood plain, solid, straight chowkats and frames rought framed rebated on the solid, rounded or chemfered put together with glue pinned at joints complete all as specified and directed.

S&F 2 nd class HW 40 mm thick plain framed panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and directed.

S&F 30mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge. (Note :- S & F Glass/gauge shall be measured and paid for separately)

S&F aluminium section in doors/windows/ventilators ,kitchen cupboards, built n almirah doors any type, powder coated in approved colour (Thickness of powder coating not less than 50 micron), aluminium section (medium weight of series 'B') or section as directed by Engineer-in-Charge, cut to size, jointed together with cadmium plated steel screws including rubber beading or gasket for aluminium sections for fixing glass/XPM jali or for fixing bakelite sheet and all necessary fittings complete, screws, plugs for fixing screws, etc all as specified and directed Notes : (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of bakelite sheet glass pane,wire mesh and rubber beading or gasket will be measured separately.

S&F aluminum anodised grill DG- 202 ( 10 mm x 7.5mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.

Supply only 4mm thick figured glass/pin headed type ordinary quality fixed in aluminium ventilator n exc 0.50 Sqm each pane all as specified & as directed by EIC.

Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples fixed in aluminium windows/wooden doors complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth , 0.45 mm ,nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beadings complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or aluminium wire staples,and fixing of teak wooden beeding complete all as specified and as directed by the Engineer in charge.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing

S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply and fix for 6mm thick bakelite sheet prelaminated both side with decorative choice laminations with aluminium frame cuboard shutter work complete all as specified and directed.

M&L fixing in repairs for pre laminated particle board 18/19mm thick interior grade prelaminated one side with decorative choice lamination fixed with screws to timber frame work.

S&F stainless steel butt hinges 125mm size medium wt coIled rolled.

All as in item 47 above but fixed in repairs

S&F anodised aluminium alloy body door stopper 150 mm size

S&F anodised aluminium extruded handles 150 mm size.

All as in item 50 above but fixed in repairs

S&F aluminium anodised barrel tower bolts of extruded section 200 mm size.

All as in item 35 above but fixed in repairs

S&F aluminium anodised bow handle 75 mm long cast type complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy.

All as in item 55 above but fixed in repairs

S & F Hasp and staple aluminium anodised 100mm

S & F Al Hat pegs and hooks solid body, 125 mm to 175 mm

S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 100mm Aluminium anodised, tower bolts of extruded section complete all as specified and directed.

S&F in repairs for 20mm dia curtain rods power coated with fixing brackets, stops, rollers etc complete all as specified and directed

S&F mild steel hold fasts and similar smal articles conforming to Fe-290 Grade E-165 complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in bed blocks for fixing hold fasts.

S&F in repairs PVC cabinet mirror of size 600X450 mm complete all as specfied and directed.

S&F in repair brass chromium plated towel rail 20mm dia 'D' type 600mm long between flanges, of with and including chromium plated brass screws etc complete all as specified and directed.

S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets,32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed.

S&F in repairs brass Chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed 15mm bore fancy type. Make -Jaquar cat No : FLR- 5273UPR

S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and ( Make :- Jaquar Cat No OPP-15037PM) complete all as specified and directed.

S&F in repair Health faucet with 1.5mtr tube & hook cat No BEA-40 of Prayag polymers pvt ltd complete all as specified and directed.

S&F in repair for CP concealed stop cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&Fin repair Soap dish, Stainless steel fancy type approx size 160x160x90mm of make Jaquar CAN-CHR-1131 N complete all as specified and directed.

S&F Toilet paper holder cat No BA-58 of Prayag polymers pvt ltd complete all as specified and directed.

S&F in repairs chromium plated fancy type shower roses 180mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed Make :_ jaquar. Cat No . OHS -1759

S & F in repair PVC low level flushing cistern 10 Ltr capacity incl 32mm dia float valve and flush pipe complete

S&F in repairs PVC inlet connections 45 cm long, 15 mm bore with PTMT nuts.

S&F 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed.

S&F in repair fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as directed. Make Jaguar or equivalent

S&F in repair fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange Make Jaguar or equivalent

S&Fin repair fancy type stainless steel towel rack size 600mm X 300mm including apair of brass bracket complete all as specified &directed by Engr in charge. Make Jaguar or equivalent

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified. Make Jaguar or equivalent

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .Make: Cardin or Equivalent

S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F Stainless steel Curtain Rod 20mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod all as directed and specified.

S & F S&F sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar onbowl type overall size 23" L x 18"W undermount kitchen Sink with basket Strainer complete all as specified and as directed .

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified.

S & F in repairs vitrious China pedestal pattern WC incl PVC seat cover (White) etc complete all as specified.

S&F in repairs grating doom 100m dia of PTMT (Minimum Wt 25 gms) complete all as specified and directed.

M&L for PVC (SWR) 75 mm dia floor trap with gratings incl jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC(SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F SWR bends 110 mm dia of any radius with access door complete all as specified and directed.

S&F PVC SWR 110 mm dia single (Single Y) equal of unequal with access door complete all as specified and directed.

S&F PVC SWR 75 mm dia single (Single T) equal of unequal complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or any pattern) including all fittings heads, shoes, bends swan necks etc including cleaning for refixing or removal to stores.

Dismantling cast iron of any description etc complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repairs 50mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S&F 110mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

S&F 160mm bore PVC (SWR) pipe single socketed(ISI Marked) any length with rubber ring joints , complete fittings etc fixed to wall fixed with MS clamps8mm dia with two nuts wall nails etc complete all as specifed and directed.

M&L for sealing and grouting the mouth of all pipes using Fosrocs non shrink grout Conbextra GP2 or equivalent , For dia of pipe 110 mm complete all as specified and directed.

M&L for sealing and grouting the mouth of all pipes using Fosrocs non shrink grout Conbextra GP2 or equivalent , For dia of pipe 75 mm complete all as specified and directed.

M&L for sealing and grouting the mouth of all pipes using Fosrocs non shrink grout Conbextra GP2 or equivalent , For dia of pipe n exc 75 mm

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.

S&F CPVC pipe 16 mm bore SDR 11and plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.

Ditto all as per item No 109 above but 20 mm bore etc, complete all as specified and directed.

Demolition of cement concrete ( reinforced) as in roofs, shelves, chajjas, floors ( other than ground floors), beams, staircase, landing, chajjas , parapet, water tank and similar suspended work etc. and removal of rubbish/ demolished materials out of MD land complete all as specified and directed

Chipping, removing carefully loose/damaged concrete from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for carry out application of ‘Bi-polar migratory corrosion inhibitor' [Make : M/s. Krishna Conchem (EPCO KP-100) / BASF (MasterProtect®8000Cl)] on RCC surfaces, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar / concrete to ensure bond between old concrete & new concrete/ new mortar by brush application, complete all as specified and directed.

M&L for providing Polymer Bonding Agent of Make M/s. Krishna Conchem (MONOBOND) OR Fosroc (NITOBOND-SBR) OR equivalent brand of Dr. Fixit,as approved by the GE followed by flexible polymer based putty ( 1cement: 1.2 finesand :20% polymer by weight of cement : water as required ) on cracks after cutting the cracks to a 'V' shaped groove upto 10 mm wide and 10 mm deep in structural RCC members , finished with spatula etc. complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified mortar from M/s. Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness, including levelling, profiling etc, complete all as specified and directed.

M&L for building up the profile of structural members using polymer modified mortar from M/s Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr. Fixit, exceeding 20mm thick and not exceeding 40mm thick in two layers, each of equal thickness including levelling, profilling etc, complete all as specified and directed.

FILLING AND REINSTATING OF SEPERATION CRACKS:- Opening the seperation cracks at the junction of RCC and masonry whereever directed and instruted into V grroves 2" to 3" from either side of the cracks by carefully making the areas to be opened up using a cutting machine and skilfully/ carefully chiselling with a well sharpened chisel and hammer as directed including wire brushing and washing of concrete substrata and masonry walls with water jet to the surfaces thus prepared to the entire satisfaction of the consultant

M&L for moistening the cracks , providing and applying priming/bonding coat of slurry made out of " Polvalk EP" and cement ( or equivalent as specified in the list of brand names) in proportion 1:1 to surfaces prepared as instructed and directed.Filling the cracks /grooves by providing and applying "Polvalk EP" polymer modified cement mortar (or equivalent as specified in the list of brand names ) in proportion of 1:5:15( Polyalk EP:Cement:Graded sand/quartz sand) on the prepared surfaces and finishing it in level with the existing plaster including hand packing, curing and making the surface similar to external plastering using wooden floats/ punch etc complete all as specified and directed.

Drilling holes of required size upto 16mm diameter and 50mm depth in concrete and cleaning the same as directed

Providing and fixing 12mm diameter aluminium/ PVC injection nipples and securing the same as directed & providing and injecting cementitious grout using CEBEX 112 additive of Fosroc at the rate of 225 grams per bag of cement and using suitable mechanical gun/ pump including mixing etc complete all as specified and directed.

Providing & fixing epoxy dipped shear keys of 10mm dia and 4" to 6" length in columns before jacketing, Micro concreting as per Consultants Instructions and directions.

M&L for casting & repairing of excessively damaged distressedRCC members (exceeding 40mm in thikness) with prebatched, prepacked, single component ready to use microconcrete from Fosroc (Renderoc RG) or equivalent of Dr. Fixit as approved by GE, at any level/ height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications and all other relevant works, complete all as specified and directed. (Note : Reinforcement only shall be measured and paid separately).

M & L for TMT steel bars 10 mm dia and over, cut to n length , bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or escuring with clips quality confirming to

ditto all as per item No 126 above but upto 10 mm dia in stirrups , spaces and binders all as specified by Engr-in-charge

S&F MS framed brackets of angles or tees with web and flanges, cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n.exc 10kg each bracket conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed by Engr-in-Charge.

M&LMS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings,shed /chajjas . conforming to Fe.290.Gde-E-165

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/ chajjas (one side half circle crank ), fixed with self tapping screws complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed.

Material & labour for avg thickness 75 mm thick PCC ( 1:3:6) type C-2,using 40mm graded stone aggregate as in plinth proctection complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for treating points of contact of wood work with masonary / concrete by chemical emulsion (in oil or kerosene based solution) @ 0.50 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

M&L for treating soil under existing floor at internal junctions with wall using chemical emulsion @ 1.00 ltr per hole , 300 mm apart including drilling and plugging 12 mm dia holes with CM 1:2 to match the existing floors , all as specified and directed.

M&L for carefully opening of existing expansion joint, thoroughly cleaning, providing and applying 2 component polysulphide sealent at expansion joints with backing rods upto 50mm thickness inclusive of all necessary cleaning of the joints, surface preperation etc all complete as per consultants instructions , directions and manufacturers specification

M&L treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc. area n exc 0.1 sq. m each

"Supply and Application of 4 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete WALL surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation followed by curing and then top-coated with 1 protective coat of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only" upon drying on projected cupboard area.

M&L for special treatment for sunken portion of WCs/ Bath & toilet executed in following stages:- Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc Complete. Stage 2:- Providing 10mm thick plaster in CM 1:3 mixed with integral water proofing chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd in the proportion/quantity all as per Manufacture's instructions. Stage 3:- Apply Dr Fixit Primeseal primer or Equivalent of STP Ltd (and allow to dry for 8 hours) all as per Manufacture's instructions. Stage 4:- Apply two coats of water proofing elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP (The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per Manufacturer's instructions. Stage 5:- Rendering 10mm thick in CM 1:3 mixed with Integral water proofing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd all as per Manufacture's instructions. Stage 6. All CI joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP all as per Manufacture's instruction. Stage 7:- Making holes in wall and fixing 600mm long 40mm dia medium grade GI spout for draining the surplus water if any Stage 8:- Carry out ponding test for 48 hours to ensure water tightness of repaired sunken portion.water tightness of repaired sunken portion and filling of sunken portion for cement concrete Type E2 1:5:10 using 40 mm graded aggregate as in lean concrete complete all as specified and directed. Note :- (a) Only plan area shall be measured and accorded for payment under this item. (b) Depth of sunken portion of WC's/Baths shall be upto 35cm, which is to be taken into account while quoting the rate against this item. (c) Rate quoted by Contractor shall be deemed to be included for all the horizontal and verticale treated surfaces of sunken portions of WC & Bath.

S & F repair for Toilet and Bathroom External Downtake Pipelines for Toilet Domestic Water Supply Downtake, Toilet Soil Water Downtake Pipe, Bathroom Solar Hot Water Supply Downtake, Bathroom Waste Water Downtake Pipe and Bathroom Water Supply Downtake Pipes fixing done with Pipe Supporting Clamping System consists of Profile Bracket + Slotted C Channel + U Bolt R/M System - 1. Water Supply Pipe 1 1/4" GI pipe - 1 no.; 2. Soil Water Pipe 4" CI - 1 no.; 3. Solar Water Pipe with Aluminium insulation casing 3" PVC size - 1 no.; 4. Waste Water Pipe 3" CI - 1 no. and 5. Bathroom Water Supply 1 1/4" GI pipe - 1. no. running from Terrace to Ground Floor Vertical Fixed line with wall distance 4": Pipe Support Clamping made of 1. Profile Bracket Type A3 (Wall Distance 4") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 45" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket of A3 Type (Wall distance 4") - 3 Nos. 2. Continuous Slotted C Channel of B3 Type Size 45" - 1 No.; 3. U Bolt R/M for 1 1/4" GI Pipe Dia. - 1 No.; U Bolt R/M for 4" CI Pipe Dia. - 1 No.; U Bolt R/M for 3" PVC Pipe Dia. - 1 No.; U Bolt R/M for 3" CI Pipe Dia. - 1 No.; U Bolt R/M for 1/4" GI Pipe Dia. - 1 No. 4. Justi Khilla GI coated 2 1/2" - 6 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing of CE Navy Mumbai TD/2023/01. Make : Shaivi or equivalent as approved by GE

S & F repair for Kitchen External Downtake Pipelines for Waste Water Pipes and Water Supply Pipe fixing done with Pipe Supporting Clamping System consists of Profile Bracket + Slotted C Channel + U Bolt R/M System - 1. Waste Water Pipe 3" CI (75 mm) - 1 no., 2. Solar Water Pipe with Aluminium insulation casing 3" PVC size - 1 no.and 3.. Water Supply Downtake 1 1/4" GI - 1 no. running from Terrace to Ground Floor Vertical Fixed line with wall distance 4": Pipe Support Clamping made of 1. Profile Bracket Type A3 (Wall Distance 4") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 15" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.for one unit : 1. Profile Bracket of A3 Type (Wall distance 4") - 2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 15" - 1 No.; 3. U Bolt R/M for 3" CI Pipe Dia. - 1 No.; U Bolt R/M for 3" PVC Pipe Dia. - 1 No.; U Bolt R/M for 1 1/4" GI Pipe Dia. - 1 No. 4. Justi Khilla GI coated 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing of CE Navy Mumbai TD/2023/01. Make : Shaivi or equivalent as approved by GE

S & F repair of RISER Overhead Tank Water Supply pipelines fixing done with Pipe Supporting Clamping System consists of Mono Bracket + U Bolt System - RISER Water Supply take pipes 1 1/2" GI - 1 no. running Vertical Fixed line from 1st floor to Ground floor with wall distance 1": Pipe Support Clamping made of 1. Profile Bracket Type A1 (Wall Distance 2") of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 10" (Continuous Slotted C Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip + Zn Al flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Mono Bracket for 1 1/2" GI pipe; Wall distance 1" - 1 Nos. 2. U Bolt R/M for 1 1/2" GI pipe Dia. - 1 nos and 3. Justi Khilla GI coated 2 1/2" - 2 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing of CE Navy Mumbai TD/2023/01. Make : Shaivi or equivalent as approved by GE.

S & F repair of Rain Water Downtake pipelines fixing done with Pipe Supporting Clamping System consists of Rain Water Bracket + U Bolt System - Rain Water Downtake Pipe 6" PVC - 2 nos. running Vertical Fixed line from Terrace to Ground floor with wall distance 3": Pipe Support Clamping made of 1. Rain Bracket Set Wall Distance 3" of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Rain Bracket Set for 6" PVC pipe, Wall distance 3" - 1 Nos. 2. U Bolt R/M for 6" PVC pipe Dia. - 1 nos and 3. Justi Khilla GI coated 2 1/2" - 2 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing of CE Navy Mumbai TD/2023/01. Make : Shaivi or equivalent as approved by GE

S & F repair of Rain Water Downtake pipelines fixing done with Pipe Supporting Clamping System consists of Rain Water Bracket + U Bolt System - Rain Water Downtake Pipe 4" PVC - 4 no. running Vertical Fixed line from Terrace to Ground floor with wall distance 3": Pipe Support Clamping made of 1. Rain Bracket Set Wall Distance 3" of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Rain Bracket Set for 4" PVC pipe, Wall distance 3" - 1 Nos. 2. U Bolt R/M for 4" PVC pipe Dia. - 1 nos and 3. Justi Khilla GI coated 2 1/2" - 2 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing of CE Navy Mumbai TD/2023/01. Make : Shaivi or equivalent as approved by GE

Taking down carefully unserviceable point wiring of any type & pattern (Light/Fan/Socket or power) including unserviceable fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etc and making good disturbed surfaces of walls/ roof etc complete all as specified and directed.

Taking down complete main switches/DBs with enclosure and its components of any size and capacity ,etc complete all as specified and directed.

M & L for concealed point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including PVC conduit (minimum 20mm dia) concealed in wall etc (also including cutting chiseling in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan Point/ controlled by one one way switch, complete all as specified and directed. Make of conduit :- ISI Marked Polycab/ Precision/ Astral Make of copper wire :- Polycab/ RR Kobal/ Havells/ Anchor/ Plaza Note: Modular flush box and inner/outer plates measured and paid separately.

-ditto- all as per item No. 147 above but for One 3 pin socket outlet 5 Amps on independent board.

-ditto- all as per item No. 147 above but for One 3 pin socket outlet 5 Amps on same board with other switches , complete all as specified and directed.

M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH with and in and including PVC concealed conduit in wall having thickness not less than 2 mm with all fittings including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and all as specified . Note: colour coding is to be maintained .(Ph-Red, N-Black, , Earth- Green) Make of conduit :- ISI Marked Polycab/ Precision/ Astral Make of copper wire :- Polycab/ RR Kobal/ Havells/ Anchor/ Plaza Note: Modular flush box and inner/outer plates measured and paid separately.

M&L for point wiring with 4.0 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH with and in and including PVC concealed conduit in wall having thickness not less than 2 mm with all fittings including 4.0 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH as earth continuity conductor connected to common earth dolly.and including cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching existing colour and all as specified . Note: colour coding is to be maintained .(Ph-Red, N-Black, , Earth- Green) Make of conduit :- ISI Marked Polycab/ Precision/ Astral Make of copper wire :- Polycab/ RR Kobal/ Havells/ Anchor/ Plaza Note: Modular flush box and inner/outer plates measured and paid separately.

M&L for ceiling rose three phase PVC/ polycarbonated isolated AC 240 volts 50Hz complete all as specified. Make : Anchor/ Legrand/ Havells

Supply and fixing bell ding dong 230 volt Ac 50Hz complete all as specified and directed. Make : Anchor/ Legrand/ Havells

Supply and fixing modular ceiling fan regulator 120 watt 2 module complete all as specified and directed. Make : Anchor/ Legrand/ Havells

M&L for switch modular one way 6/10 amps 1 module complete all as specified. Make : Anchor/ Legrand/ Havells

M&L for switch modular one way 16 amps 1 module complete all as specified. Make : Anchor/ Legrand/ Havells

M&L for socket modular 6Amp 2/3 pin combined 2 module complete all as specified and directed. Make : Anchor/ Legrand/ Havells

M&L for socket modular 6/16 Amp 2/3 pin combined 2 module complete all as specified and directed. Make : Anchor/ Legrand/ Havells

M&L modular bell push 6Amp 1 module complete all as specified and directed. Make : Anchor/ Legrand/ Havells

Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 12 way double door with din rail and 200 Amp bus bar complete all as specified and directed. Make : ABB/ Legrand/ Siemens

Supply and fix in repairs sheet metal enclosure powder painted for MCB DB SPN 8 way double door with din rail and 200 Amp bus bar complete all as specified and directed. Make : ABB/ Legrand/ Siemens

Supply and fix in repairs MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified and directed. Make : ABB/ Legrand/ Siemens

Supply and fix in repairs MCB SPN 240 Volts 40to 63 Amps breaking capacity 10 KA,B Curve rating complete all as specified and directed. Make : ABB/ Legrand/ Siemens

Supply and fix in repairs MCB SPN 240 Volts 32 Amps breaking capacity 10 KA,B Curve rating complete all as specified and directed. Make : ABB/ Legrand/ Siemens

Supply and fixing modular metal flush box 1/2 module complete all as specified and directed.

Supply and fixing modular metal flush box 3 module complete all as specified and directed.

Supply and fixing modular metal flush box 4 module complete all as specified and directed.

Supply and fixing modular metal flush box 6 module complete all as specified and directed.

Supply and fixing modular metal flush box 8 module complete all as specified and directed.

Supply and fixing modular metal flush box 12 module complete all as specified and directed.

Supply and fixing modular white outer cover plate with inner frame 2 module complete all as specified and directed.

Supply and fixing modular white outer cover plate with inner frame 3 module complete all as specified and directed.

Supply and fixing modular white outer cover plate with inner frame 4 module complete all as specified and directed.

Supply and fixing modular white outer cover plate with inner frame 6 module complete all as specified and directed.

Supply and fixing modular white outer cover plate with inner frame 8 module complete all as specified and directed.

Supply and fixing modular white outer cover plate with inner frame 12 module complete all as specified and directed.

Material and Labour for tube light fitting LED 20 watt with decorative end caps made out of CRCA sheet powder coated complete with housing with aluminium heat sink on back of leds ,driver efficiency not less than 88%, lumens efficiency > =100 lm/Watt, starting voltage 90V, THD<=20, power factor >0.90, color rendering index (CRI) >80, color temperature 6500 K, UV/IR radiation no harm radiations having inbuilt surge protection device for overvoltage protection 2.5kV, Isolation 3.75 kV and Zero mercury content with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as per specified and directed. Make : Philips/ Havells / Wipro

Material and Labour for tube light fitting LED 10 watt with decorative end caps made out of CRCA sheet powder coated complete with housing with aluminium heat sink on back of led ,driver efficiency not less than 88%, lumens efficiency > =100 lm/Watt, starting voltage 90V, THD<=20, power factor >0.90, color rendering index (CRI) >80, color temperature 6500 K, UV/IR radiation no harm radiations having inbuilt surge protection device for overvoltage protection 2.5kV, Isolation 3.75 kV and Zero mercury content with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose/PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as per specified and directed. Make : Philips/ Havells / Wipro

Taking down existing ceiling fans and and re-fixing the same ceiling fan any sweep including provisioning of cable from celing rose toc/ fan and spry painting of ceiling fan with two coats of synthetic enemal paint complete all as specified and directed.

Supply and fix exhaust fan, metal body AC single Phase. 230V of size upto 300mm sweep with louvers & shutter, blades, and frame complete all as specified and directed. Make : Havells / Crompton /Bajaj

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep (without remote). Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) operate without remote and provisioning of flexible copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan, complete with dow rod, blades, canopies etc, all as specified and directed. Note: (Only for Sevant Qtrs) Make : Havells / Crompton /Bajaj

Supply & fix Wall mounted fan 300 mm sweep, 1440 rpm, 230V complete steel body” Read: - “300 mm sweep 3 way speed control, 1440 rpm, 230V complete PVC body, smooth oscillation with suitable Fastners/ bolts, nuts, washers, fixing over the wall Surface with provisioning of 23/0.0076 flexible three core wire for electrical connections from ceiling rose to fan all as specified and directed. Make : Havells / Crompton /Bajaj

Supply and Fixing AC Box with mini MCB,3 Module power unit 20 A SP MCB and unbreakable heavy duty Including ISI Plug top etc complete all as specified and directed. make:legrand/Havells/Anchor(Roma)

M & L for electronic circuit PCB for BLDC Ceiling fan of 1200/1400 mm sweep as per OEM etc complete all as specified and directed .

M & L for taking out and re-installation of solar water system with all accessories and connnected items such as pipe line, solar rode, water tanks etc complete all as specified and directed .

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP66 protection, PF>0.95, LED light luminous efficiency shall not be less than 90 Lumens/Watt and the color rendering index shall not be less than 70 and Correlated Color Temperature is 6500K, UV/IR radiation no harm radiations having inbuilt surge protection device for overvoltage protection 2.5kV, Isolation 3.75 kV and Zero mercury content light should complying ISI and BIS marking complete. Make : Philips/ Havells / Wipro

Taking down carefully unserviceable security light fittings of any type etc and making good disturbed surfaces of walls/ roof etc complete all as specified and directed.

Taking down carefully unserviceable exhaust fan of 300 mm sweep and deposite to mes store yard complete all as specified and directed.

Taking down carefully and reinstallation of gysers with suitable Fastners/ bolts, nuts, washers, fixing over the wall complete all as specified and directed.

M & L for unserviceable water heater storage electric gysers 25/50 ltr storage capacity disconnecting of electric connection and water supply connection and refixing after repair and rectification of defects of gyser i.e. to replace burnt wires to change indicator lamp,top plug nuts/bolts/gaskets/safety release valve /anchor fastners etc and making gyser ready for reuse.Any small items are deemed to be included in the rate quoted for this item.

R J ENTERPRISES

the bhimani group of companies

MUKESH CONSTRUCTION CO

M/s Shree Construction Co

S R INFRASTRUCTURE

Joy builders