Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8 L
EMD Value
₹8,500
Closing Date
3 Nov 2023, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
A R Padmanabhareddy
Providing High Mast Light and High Mast Flatform Bed in Kolar Cmc limits.
DMA/2023-24/EL/WORK_INDENT5048
DMA/2023-24/EL/WORK_INDENT5048
Reserved
Electrical
Two Tender Document System(Two Cover)
DMA City Municipal Council Kolar
The tenderer in its name should have in the last five years i.e., 2018-19 to 2022-23 The bidder should have Satisfactorily completed at least one as any construction work of value not less than Rs.1.64 lakhs.
The tenderer in its name should have in the last five years i.e., 2018-19 to 2022-23 Achieved in at least one financial years a minimum annual financial turnover of Rs.6.57 Lakhs.
Liquid assets and or availability of credit facilities of not less than Rs.1.97 Lakhs (Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement etc).
PWD Electrical/Electrical inspectorate contractors
Schedule Tribes (ST) certificate
₹500
₹8,500
20 Oct 2023
20 Oct 2023
6 Nov 2023
31 Oct 2023
Providing High Mast Light and High Mast Flatform Bed in Kolar Cmc limits.
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches,foundation of bridges and such simillar works in all kinds of soils , as per drawing and tec...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure /Superstructure complete as per Drawing and Technical Specifications. (PWD SR 2021-22, V-III, Pg No:-71, It...
Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Fabrication, Supplying, Erection, Testing and Commissioning of...... ms long Polygon high mastwith single/Multipletelescopicsections having, (minimum overlap distance of 1.5 times of topsection) thi...
Supply of LED floodlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarbo...
Fabricating supplying and mounting MS box made out....SWG suitable for floor /wall mounting, fully weather proofwith provision for better heat dissipation, provided withhinged front cover, equipped wi...
Supply and fixing of 4pole power contactor with NO/NCcontacts on existing wood/panel board using necessarybolts, nuts, washers and wiring etc., complete with AC-3Rating and as per IS-13947.(PWD ELE SR...
Supplying and fixing angle iron frame work fabricated out ofM.S. angle iron.. and M.S. Flat......with bolts, washers etc., andpainted with 2 coats of red oxide and then two coats ofapproved paint.(PWD...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductorconfirming to IS 8130-1984 and (Virgin) PVC insulationsheathed suitable for workin...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (BESCOM ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers asdirected by the departmental staff (BESCOM SR 2021-22, Part-IV, Pg No:-09, Item Code:-230) a) 2.5 to...
Supplying & fixing of Porcelain fuse channel with cut out onexisting wooden/panel using necessary nuts, bolts andwashers. (PWD ELE SR 2022-23, Part-I, Pg No:-10, Item Code:-5.7.5) 200A a) For High Ma...
Supplying and fixing Microprocessor Based Astronomical timerSwitch with using necessary bolts, nuts and washers. (PWD ELE SR 2022-23, Part-I, Pg No:-16, Item Code:-5.48) a) For High Mast Timer Switch
Supplying and fixing Moulded Case Circuit Breaker (MCCB)over the existing wood/panel board using necessary screws,bolts, nuts, necessary phase separators, handle and wiringcomplete. Protection of Over...
Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-69...
Supplying and fixing hylum plastic sheet 3mm thick withnecessary nitches for fixing switches, regulators etc., andfixing on existing wood or metal box using N. F. screws.(PWD ELE SR 2022-23, Part-I, P...
Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit usingnecessary machine screws.(PWD ELE SR 2022-23, Part-I, Pg No:-06, Item Code:-3.9) 80 mm...
Cutting asphalt Road surface by Machine cutting to demarcate the trench width of the surface. (KUWSSDB SR 2021-22, V-V, Pg No:63, Item Code:-1.2) a)For Earthing Pit
Digging of Pit for providing GI Pipe type Earthing (BESCOM SR 2021-22, Part-IV, Pg No:-01, Item Code:-1.6.1) Ordinary Soil a) For Earthing Pit
Earthing: Supplying and fixing and wiring earth electrode forgrounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sal...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
p 26 kw-1 High mast 5048 reserved.doc
Tender Document • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .