REPAIR / MAINT OF EXTERNAL WATER SUPPLY PIPE LINES AND COMPREHENSIVE REPAIR TO FIRE FIGHTING SYSTEM AND OTHER MAINT WORKS AT VARIOUS LOCATION IN THE AOR OF AGE E/M UNDER GE (NW) MANKHURD

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and not exceeding 10 sqm on plan and getting out in hard/dense soil for laying of cables, etc. complete all as specified and as directed.

-ditto- all as per item no 1 above but soft/loose soil.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm deep as in hard/soft soil complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point in soil including spreading in low lying area and leveling complete all as specified and as directed.

M&L for cutting existing road/hard standing not exceeding 45x50 cm in wide & depth getting out excavated material for laying GI tube, returning filling & well rammaing watering finish suraface 10 cm from top including provision of PCC 1:3:6 for repairing, including removal of surplus soil all as directed.

M & L for PCC 1:3:6 in round/ square shape as per site requirement of thickness not less than 3" suitable for fixing of cast iron tank cover complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning and setting aside for refixing or as schedule of credit, etc complete all as specified and as directed for the 20 mm bore pipes including necessary staging/scaffolding as required.

Ditto all as per item No 7 above but 25 mm dia bore complete

Ditto all as per item No 7 above but 40 mm dia bore complete

Ditto all as per item No 7 above but 50 mm dia bore complete

Ditto all as per item No 7 above but 80 mm dia bore complete

Ditto all as per item No 7 above but 100 mm dia bore complete

M & L for relaying/fixing old pipe obtained from demolition/taking down including cutting out damaged ends and rethreading for fixing with and including new fitting complete of 25 mm bore including necessary staging/scaffolding all as specified and directed.

Ditto all as per item No 13 above but 40 mm dia bore complete

Ditto all as per item No 13 above but 50 mm dia bore complete

Ditto all as per item No 13 above but 80 mm dia bore complete

Ditto all as per item No 13 above but 100 mm dia bore complete

Supply ,Laying, fixing, connecting and testing steel water tubing, medium grade, galvanised, with screwed and socketed joints, in any length, including supply and fixing all fittings, fixed to walls or laid in trenches / floors etc complete all as specified and as directed for the 20 mm bore, ISI marked. Make-: Tata/ Jindal/ BST/ Oswal

Ditto all as per item No 18 above but 25 mm dia bore complete

Ditto all as per item No 18 above but 40 mm dia bore complete

Ditto all as per item No 18 above but 50 mm dia bore complete

Ditto all as per item No 18 above but 80 mm dia bore complete

Ditto all as per item No 18 above but 100 mm dia bore complete

Supplying, Laying, jointing, testing and commmisioning in repairs of DI Pipe in repairs of 80 mm bore, with spigot and socketed ends centrifugally cast Class K-7 type, Push on joint confirming to IS 8329 laid in trenches with and including rubber tyton joints including taking out old u/s MS/DI/CI/GI pipes all as specified and directed:-

Ditto all as per item No 24 above but 100 mm dia bore complete

Ditto all as per item No 24 above but 150 mm dia bore complete

Ditto all as per item No 24 above but 200 mm dia bore complete

Supply & fixing in repairs of Jointing CI/DI fittings for spigot/socket pipes such as bends of any radious and angle, collars, tapers, tail pieces, Tee pieces, Caps and plugs suitable above from 80 mm bore dia all socketed or socket and spigot or side flanged including taking out old u/s CI/DI fittings complete all as specified and directed.

Supplying & Fixing in repairs , jointing and testing of cast iron Sluice Valve of 80 mm bore ISI marked confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top for following bores complete with nuts, bolts, washers and gaskets including taking out old u/s fittings complete all as specified and directed.

Ditto all as per item No 29 above but 100 mm dia bore complete

Ditto all as per item No 29 above but 150 mm dia bore complete

Ditto all as per item No 29 above but 200 mm dia bore complete

S & F in repairs cast iron Foot valve 80 mm, Ball type with flange joint model B-05 (N) conforming to IS with MS nuts bolts, washer, rubber gasket etc., any pattern as approved including taking out / dismantling old unserviceable one and testing complete all as specified and as directed. Make : KIRLOSKAR / UPADHAYA / LEADER / OR BEST AVAILABLE IN MARKET

Ditto all as per item No 33 above but 50 mm dia bore complete.

Ditto all as per item No 33 above but 100 mm dia bore complete.

Ditto all as per item No 33 above but 150 mm dia bore complete.

Supply and fixing in repairs CI Double Orifice Kinetic Air Release Valve flanges ends as per IS 14845 including flange joints such as packing, nut and bolts of size 80 mm bore etc including raking out old u/s CI Double Orifice Kinetic Air Release Valve complete all as specefied & directed.

Supply and fixing in repairs CI Double Orifice Kinetic Air Release Valve flanges ends as per IS 14845 including flange joints such as packing, nut and bolts of size 50 mm bore etc including raking out old u/s CI Double Orifice Kinetic Air Release Valve complete all as specefied & directed.

Supply only Calcium hypo chlorite 65% -70% chlorine content granular based water disinfectent in sealed containers complete all as specified and as directed. Make:- 1.Aqufit manufactured by Sree Rayalaseema Hi strength Hypo Ltd. 2. Puri chlor manufactured by Sree Rayalaseema Hi strength Hypo Ltd. / M/s Ravi Enterprises / M/s Potter & Watts (Traditional products). Brands having pan india availability, acceptability & being manufactured /processed in open market termed as traditional products .The brands /makes must have certified by All India Institute of Hygenic & Public Health. 3. Best available in the market

Collecting water sample in clean bottle from location as directed for testing of physical test, chemical test, microbiological test as per IS-10500-1991 from NABL approved chemical laboratory and submitting test report complete.

Supply and install in repairs AFO (Auto fire off) fire extinguisher ball 150 mm dia (standard orange) with stand complete all as specified and directed.

Supply only DECPAC-P (Aluminium based caogulant) packing in 25 kg plastic bags complete all as specified and directed.

Supply and fix in repairs ISI Marked UPVC Pipe size 50mm nominal dia,pressure pipe schedule 80 with all connected acessories like UPVC bend,Tees,Unions,Sockets etc for each 3 mtr length of Pipe & solvent to join it including taking down old unserviceable pipes complete all as specified and as directed. Make:Supreme/Dutron/Finolex/Duplon

All as per item No.43 above but of 40mm dia

All as per item No.43 above but of 25 mm dia

S&F Transciever automation for the water level Detector and controller with the feature mentioned here under comprising of following: (a) S& F Transciever must communicate at a distance of 3km -5kms range with each module must have the LORA/GSM or suitable communication module ( long range antenna) must work above 500 mhz and each module shall have a processor module connecting to the sensor, with the facility that the processor module to sense the low level (10-20%) and high level of the water level (90-100%) so as to raise the hooter and communicate with the other hardware modules with antennas (b) S&F transducer module wiring through the D sub connectors (MIL industrial grade are to be used). All the wiring must be shielded optical co-axial cable for connection to flasher and hooter. Rates quoted are deemed to be included for suitable flasher and hooter. (c) S&F Hooter 12V/5 Amp with suitable converter or hooter suitable for 230V AC Supply must be provided standard suspended rust proof stand Note: All the NPT cable glands must be used for the sensor interface and MCB controller board.

(d) S&F 12V flasher with suitable converter or flasher suitable for 230V AC Supply connected with suitable 3 Core Co axial cable suitably crimped nicomatic connector. Note: All the cables to be drawn through suitable medium grade conduit suirtably fixed with clamps. (e) S &F of LED display board with superior night vision display to be provided at the receiver station. (f) S&F controller Board confirming to IP 65 protection 3D printed with EMI/EMC compatible FE 32 material for the enclosure. Note: (a) One transmitter for over Head Tank and one receiver for Pump House . (b) Contractor has to visit the site before execution. Any cable required deemed to be included in quoted rate. No extra payment will be made on this account.

Supply & Fixing air termination Copper rod 12 mm dia, 300 mm long for lightening conductor including base plate with all necessary nut bolts and drilling job etc.

Supply & fixing for Aluminium strip 25 x 3.15mm on wall/ roof/ batten or recessed or buried in ground including all insulators, screw, nut bolts with saddles and fixing for roof conductor and down conductor complete all as directed by Engineer-in-Charge.

M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos. 8 mm dia, 25mm long hex. head screw.

Supply and fixing of GI pipe light grade of size 40 mm bore for laying in trenches/floors or walls including all fittings for fixing complete as required and directed by Engineer-in-Charge.

M&L for painting on wall with synthetic enameled paint of black colour of 200 x 150 mm size and writing work for earth test result with date & year all as specified and directed at site by Engineer-in-Charge.

M&L for cutting/boring of PCC / WBM / hard standing at a depth not more than 30 cm deep & 20 cm in breath and making good disturbed surfaces as it was existing by using the same new materials on cutting areas/ disturbed surfaces complete.

Supply & Fix copper strip of size 20 X 3 mm duly covered, fixed on porcelain insulators along the wall / roof / ceiling etc complete all as directed. Note : (i) Cost of Porcelain insulators and screw shall be of non-corrosive type and cost is deemed to be included in the quoted rate of the job. (ii) Gap for fixing of support insulator shall not be more than 35cm from one onother.

M & L for earthing chemical with copper plated 50 mm dia pipe 3 mtr long (100 microns) including Electrodite 50 Kg buried directly in ground including earth bore hole work (earth bore not less than 3 Mtr deep below normal ground level and connected to copper earth strip of size 20×3 mm by means of copper nuts bolts with washers and connected as per following specifications complete all as directed by Engineer-in-Charge. (a) Product Model: ASEEL 19 CP, 3 meter long (Copper Plated) – 100 microns . Fast Electrode, Model FE 80 mm 3 mtr (Pure Copper Single Pipe), Outer Dia is 80 mm with a wall thickness of 2 mm, Inner Dia is 26 mm with a wall thickness of 2.6 mm, Overall Length is 3000 mm, External Corrosion Protection: Copper Plated (100+ microns), Internal Corrosion Protection: In addition to Copper Plated (100+ microns), a ground breaking corrosion resistant Crystalline Conductive Compound is filled and compacted in the cavity within the pipes to enhance the electrodes performance. Conforms to IS: 3043 - 1987 i.e., Code Of Practice For Earthing (+ 10%) variations in dimensions applicable.

(b) Electrodite backfill: Fast Electrode Earth Enhancement Compound, Manufactured using Eco - Friendly minerals, Blended homogeneously with conductive carbon(s), Resistivity: < 5 ohm-metre (In ideal moist conditions); > 5 ohm-metre (Dry Conditions), Ph Value: 7.0 - 8.5, High water retention capacity, Hygroscopic, Ionic & Electronic conduction, Swells when it comes in contact with water thereby engaging constant contact between the electrode surface & soil which is a crucial aspect in the performance of an earthing system. Packing Size : 2 Bags of 25 kilograms, Recommended for normal soil conditions. Conforms to IS : 3043 – 1987. (c) Installation of earthing with bore well machine complete for bore exceeding upto 4.5 meter below ground level complete all as specified and directed by Engr-in-Charge.

M& L for supplying, hoisting and fixing rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) as per IS 12701-1996 (Reaffirmed 2006) of 2000 Litres capacity with virgin food grade plastic, UV stabilized tank and lid, two layers protection with black outer layer for superior UV protection and white inner layer to see water leval and tank condition including covers, hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes etc complete all as specified and as directed. Make-: Sintex/ Reno/ Plasto / Supreme

Ditto all as per item No. 55 above but 1000 litres capacity

All as per Item No. 55 above but of capacity 3000 ltrs

Supply and fix in repair 40 mm bore PVC Ball valve ISI marked high presssure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron rod and fixed complete all as specified and directed. Make -: Prayag / Shakti / Airaeuro / Agrotech / Teleflo / Techno International

Ditto all as per item No.58 above but 50mm dia bore complete. Make -: Prayag/Shakti / Airaeuro / Agrotech / Teleflo / Techno International

Ditto all as per item No.58 above but 25mm dia bore complete. Make -: Prayag/Shakti / Airaeuro / Agrotech / Teleflo / Techno International

Supply and replace in repairs aviation light LED based operations on 230V, 50 Hz AC supply comprising 302 No x 5mm supper flux LEDs made out of direct aluminum housing with Red polycarbonate dome for illumination, having integral driver, with IP65 protection, and 50,000hrs bearing cappacity minimum, system wattage ≥ 10(w) complete all as specified and directed. Make : Bajaj Model No. Cat No. BGAV302 LED or equivalent model from make Halonix/Shakti

S&F pump horizontal end suction centrifugal type Confirming to IS- 12469: 1988 with CI casing , bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 2hp 440 V , 3 phase, 50 Hz 90 m head 180 LPM dischargecomplete all as specified and as directed. Make: Kirloskar / Beacon / Crompton Greaves / KSB / Wilo Mather & Platt / Jyoti / V Guard

S & F in repairs Switch Fuse Unit 32 Amp 415 Volts in TPN Execution conforms to IS : 13947 with Sheet steel enclosure duly phosphatised and powder painted double break with side handle operation positive indication of contacts suitable for surface or wall mounting, door interlock facility, including taking down old u/s switch fuse unit complete all as specified and directed.

S & F MCB DB, 04 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating. Make :- LEGRAND/ SCHEINDER/ L&T/ ANCHOR (PANASONIC)/ SCHNEIDER/ INDO ASIAN

Supply and Laying in repairs passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 35 Sqmm 3.5 core including necessary connection and providing cable lugs as required all as specified. Make :- FINOLEX/ KEI/ POLYCAB/HAVELLS

M&L for sub main wiring in repairs with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic in PVC conduit with and including PVC insulated 6.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed. Make of wire: KEI/ Polycab/ BENLO/ Anchor(Panasonic) Make of Conduit: Sudhir/ Pressfit/ Precision Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

Dismantling the Centrifugal pump/monoblock pump of 40 HP capacity, cleaning, repairing, overhauling replacement of all unserviceable parts, nut, bolts, impellars, bushes, thrust bearing, clutch system, bowl assembly and repairing/replacement of pump shaft and re-assembling, commissioning and testing to make it operational / functional complete all as specified and as directed.

Ditto all as per Item No. 66 But 25 Horse Power

Ditto all as per Item No. 66 But 15 Horse Power

Ditto all as per Item No. 66 But 10 Horse Power

Ditto all as per Item No. 66 But 7.5 Horse Power

Ditto all as per Item No. 66 But 5 Horse Power

Lifting the submersible pump of 05 Horse Power from bore well,including flange/socket joints of delivery pipe, dismantling the flanged joints, lowering the submersible pump after repairing, by tightening the flanged/socket joints of column pipe, re-fixing of existing safety bucket with steel rope including taking down to workshop & rewinding and complete to make it operational /functional all as per specified and as directed.

M&L for rewinding of electric motor 25 HP 3 phase 50 Hz 415 volt of following capacities complete all as directed and specified as under: (a) Disconnecitng, dismantling existing burnt widning from motor and rewinding complete with super enamled copper winding wire of matching gauge including all insulation material such as PVC insulated sheet, cotton tape sleeves varnish etc. (b) Transporting electric motor including loading/ unloading upto wksp and back to site. (c) Re-installing the same at the orignal locaition with proper alignmenent connecting and testing on load. (d) Replacement 2 Nos ball bearing for each motor of existing size/model. Make- SKF/NBC/TATA. (e) Replacement of winding terminal plate with brass stus,/ nut, bolt washer.

All as per Item No 73 For Motor 20 HP Cap

All as per Item No 73 For Motor 15 HP Cap

All as per Item No 73 For Motor 10 HP Cap

All as per item No 73 for Motor 7.5/5 HP cap NOTE: Quoted rates shall be deemed to include one year warranty for motors after rewinding and commissioning.

M & L for preparation of old painted /unpainted surfaces of any description, including taking out of parts / components under painting from any position / location as listed under GE (NW) Mankhurd and applying one coat of epoxy paint (with colour code maintained as per relevant IS) including marking with flow directions (of approved colour) complete all as specified and as directed by Engineer-In-Charge for the following sizes of sluice valves. Make : Asian / Berger / APex / Nerolac

(a) Sluice valve of 80 mm size complete

(b) Sluice valve of 100 mm size complete

(c) Sluice valve of 150 mm size complete

(d) Sluice valve of 200 mm size complete

M & L for preparation of old painted / unpainted surfaces of any description, including taking out of parts / components under painting from any position / location as listed under GE (NW) Mankhurd and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-In-Charge for the following capacity of electric motor.

(a) Electric motor pump set upto 40 HP capacity

(b) Electric motor pump set upto 15 HP capacity

(c) Electric motor pump set upto 10 HP capacity

(d) Electric motor pump set upto 7.5 HP capacity

M&L for reinforced cement concrete nominal mix M-20 (using 20 mm graded stone aggregate) for foundations, including rafts, footings, foundation beams, plinth beams, bases for column etc and mass concrete, complete all as specified and directed. (Note - Reinforcement and form work will be measured and paid separately).

M&L for taking out old ERW pipes by excavating from trenches and cutting corroded or wornout portion for repairs and refixing after carryout repairs welding/jointing and relaying in trenches after repairs including applying a coat of red oxide and the coat of post after red colour paint complete all as trenches of pipes for the following bore all as specified and directed by Engr-in-charge. Note:- Excavation and earth work shall be measured & priced specifically under appropriate rate.

Ditto all as per Item No. 90 but of size 200 mm complete

Ditto all as per Item No. 90 but of size 150 mm complete

Ditto all as per Item No. 90 but of size 100 mm complete

Ditto all as per Item No. 90 but of size 80 mm complete

Supplying, fixing, jointing and testing, ISI marked heavy grade, Class C, MS ERW pipe conforming to IS: 1239-1982, including fittings such as coupling, bends, elbow and tee screwed/flanged joints, nuts & bolts, rubber packing rings,fixed on wall, hanged with ceiling through clamps, hangers, brackets, pipe supports, U bolts on MS brackets with anchor fasteners all as directed and appliying 2 coats of synthetic enamel paint over a coat of zinc dichromate primer, etc as per the site requirement in long/short pieces all as specified and directed by Engr-in-charge. Make :- Tata/ Jindal / BST/ Oswal

Ditto all as per Item No. 95 but of size 200 mm complete

Ditto all as per Item No. 95 but of size 150 mm complete

Ditto all as per Item No. 95 but of size 100 mm complete

Ditto all as per Item No. 95 but of size 80 mm complete

S & F cast iron Foot valve of size 65mm dia , Ball type with flange joint model B-05 (N) conforming to IS with MS nuts bolts, washer, rubber gasket etc., any pattern as approved including taking out / dismantling old unserviceable one and testing complete all as specified and as directed. Make : KIRLOSKAR / UPADHAYA / LEADER / OR BEST AVAILABLE IN MARKET

S&F for fabricate supply and fix MS flat clamps made out MSFI of size 40 x 6 mm (confirming to Fe 290 Gde-165 ) including drilling hole, nut, bolts, washer and made to shape of required size ie. for 100 mm dia / 80 mm dia MS pipe all specified and as directed by Engr- in - Charge.

Supply and fix in repair flanged yard hydrant/Stand post of 80 mm dia MS with double end flanged type 1.5 m height all specified and as directed by Engr- in - Charge. Make :- Best available in the market

Supply and fixing, in repair Gun Metal, single outlet type fire hydrant landing valve, type B (Double head outlet) ISI marked of size 63mm dia complete with brass spindle cast iron wheel, with rubber gasket, nut,bolt etc and instantaneous coupling ISI marked, confirming to IS 5290 hydrostatic test pressure 23 kg/cm2, minimum operating pressure 7kg/cm2. Make:- NewAge / Essel / Swati

Supply and fix in repair 63 mm dia 15 meter long RRL (Reinforced Rubber Lined) Fire hose with jacket 100% synthetic yarn fabric reinforced conforming to IS 8423:1994 complete with male and female coupling conforming to IS 903 complete all as directed by Engr-in-charge. Make:- NewAge / Essel / Swati / Safex

Supply, fixing, in repair fire hose cabinet box of size as per requirement but not less than 800X600X250 mm, out door type Made out from 18 Gauge MS sheet duly painted with 2 coats of red colour synthetic enamel paint over a coat of redoxide primer with double leafed glazed shutters (Glaged with 4mm thick glass) suitable for housing of 2 length of canvas hose, branch pipe, fire hose and nozzle, fire man axe, first aid hose and single outlet landing valve,including free standing stand made of of MS angle of size 40 mm X 40mm X 5 mm and including pcc foundation of required size but not less than 0.45 mtr height above ground levelincluding dismantling old cabinet hose box complete all as directed. Make :- Vijay / Winco / Ceasefire / New Age

M&L for renewal of valve pit of size up to 80 cm x 80 cm x 80 cm (internal diamension), stone / brick construction including all necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, PCC in foundation for mix (1:2:4) type D2 brick mansonary in cement mortar (1:4) rendering 12 mm duck in cement mortar (1:4) internally ,finished even and fair and polishing flush externally as the work proceeds in the same mortor. Mild steel angle iron 40 x 40 x 6 mm frame MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all exposed MS work with two coats of synthetic enamel paint of the that as approved by the Engineer - in - charge over a coat of red oxide primer and painting all the MS embeded in PCC with two coats of black bitumenous paint complete all as specified.

Material and labour in repair for fire points made out from MS angle iron 40x40x6 cutting welding etc including rain protection canopy made out of 2mm thick CRCA sheet, painting with two coat of red post office colour all as directed for keeping various accessories

Supply and fixing in repair brass Air release valve of size 25mm dia including all necessary fittings required for fixing complete all as specified and directed.

Supply and fix in repair Pressure gauge of 4" dial 0-14 kgs rating with ball valve including taking up / down old unserviceable pressure gauge from any position and any addition / alteration for fixing required complete all as specified and as directed. Make: FIEBIG/ H. GURU/ BAKER MERCER/ DANFOSS

Supply and fixing in repair four way fire brigade inlet / colleting heads, ISI Marked, IS No. 904, design pressure upto 24 Kgs / Cm2 operating pressure 7 Kgs / Cm2 made in gunmetal Body,with 63 mm dia gun metal, Instantaneous inlet, NRV, flanged type suitable to be installed over to be 150mm dia fire hose pipe line complete in all respect and all as specified.

Supply, install, testing and commissioning in repair of sounder /Sirens Electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 mtr with sound output variation of +DB 500mtr rage all as specified and directed. –MAKE- GE/Honey Well.

M & L for preparation of existing painted steel pipes, including fire main lines, fire hydrant stand posts, and all exposed GI pipes, by removing the deteriorated paint layer through manual or mechanical scraping using wire brushes, scrapers, or sandpaper. The surface shall be thoroughly cleaned to remove dust, grease, rust, or any contaminants, ensuring an even, bare metal or sound substrate ready for painting and apply one coat of synthetic enamel paint, ensuring uniformity in thickness and adherence as per manufacturer specifications shall comply with IS standards, apply a compatible metal primer on bare metal sections before enamel application to enhance corrosion resistance and paint adhesion complete as per specifications and as directed by the engineer-in-charge. . Make :- Asian, Berger, Apex, or Nerolac

Material and labour for preparing old painted steel pipe surface such as Rising pipe (Red), Delivery pipe (Blue), Overflow pipe washout pipe (Yellow) etc and applying one coat of synthetic enamel paint include the removal of existing deteriorated paint layers using suitable mechanical or manual methods such as scrapers, wire brushes, or sandpaper, ensuring a clean and smooth substrate complete all as specified and as directed. Note:- (i)The arrangement of necessary equipment, such as ladders, scaffolding, or cranes, for accessing and working on pipes, shall be managed and provided by the contractor, and the cost of such arrangements is included in the quoted rate.

S&F in replacement of Sheet glass 4.0 mm thick ordinary quality and glazing with oil putty or clip in square not exceed 0.5 sqm in each pane all as specified and directed

Supply and fixing in replacement First aid box PVC body with complete kit/accessories wall mounting type all as specified and directed.

Maint/Cleaning of Pump house stations inside and out side area and removing of creepers and vegetation raised along with water supply installation including surface dressing around the E/M installation not less then 3 mtr from out side fencing and removing the all waste material from site and Chemical spray inside and out side area of Sub station. Note:- T & P will be arreanged by contractor

Supply and fix in repair for jet spray shut-off polymer nozzle for hose reels conforming to EN 671-1, leak proof, corrosion free, rotary operated, Super tough recyclable polymer alloy used with red in colour complete all as specified and as directed. Make :- Best available in market

Supply and fix in repair for Shut-off nozzle 20 mm in size Non ferrous/Gun metal with leak proof, corrosion free complete all as specified and as directed. Make :- Best available in market

Supply, design, fabrication, and installation in repair of an illuminated schematic layout signboard of size 1.5 meters x 1.5 meters, made of high-quality PVC acrylic sheet, complete with LED backlighting. The signboard shall display a schematic layout of the Fire Main Line System and Fresh Water Line System at NAD, Tanaji, Mankhurd, and WED Pump Station/Fire Station, including ERW/GI/CI/DI pipes, control valves, and associated components, with provisions for hanging at the specified locations. The contractor shall be responsible for the following: 1. Trace existing ERW, GI, CI, and DI lines, including control valves and associated systems of respective area to prepare an accurate layout diagram. 2. Submit the traced layout as a draft for approval by the Engineer-in-Charge before fabrication. 3. Fabricate the signboard using a durable PVC acrylic sheet, suitable for both indoor and outdoor use. 4. Ensure the diagram is printed with high-definition graphics and labels for clarity and long-term readability. 5. Incorporate LED backlighting or other suitable illumination for visibility during day and night. 6. Provide all necessary mounting arrangements for securely hanging the board at the designated locations. 7. Submit a traceable or CAD-format version of the schematic diagram along with the final installed board for reference. 8. A one-year warranty covering defects in material, workmanship, and illumination performance.

M&L for electric water pump in repairs (self priming) of capacity 0.5 HP, 220V, 50 Hz head range 06 to 24 m, insulation class B conforming to Crompton Mini force II commissioning and testing to make it operational / functional complete all as specified and as directed. Make: Kirloskar / Beacon / Crompton Greaves / KSB / Wilo Mather & Platt / Jyoti / V Guard

M&L for electric water pump in repairs (self priming) of capacity 3 HP, 220V, 50 Hz head range 12 to 30 m, insulation class B conforming to Crompton Mini force II commissioning and testing to make it operational / functional complete all as specified and as directed. Make: Kirloskar / Beacon / Crompton Greaves / KSB / Wilo Mather & Platt / Jyoti / V Guard

Supply and fix in repair Pressure gauge of 4" dial 0-14 kgs rating with ball valve including taking up / down old unserviceable pressure gauge from any position and any addition / alteration for fixing required complete all as specified and as directed. Make: FIEBIG/ H. GURU/ BAKER MERCER/ DANFOSS

Supplying, fixing, jointing and testing, in repair cast iron body, wafer type ISI marked, butterfly valve, 200mm dia conforming to IS-13095, pressure rating PN1.6, stainless steel SS 16(CF8M) disc, single piece SS 304 shaft, EPDM sleeve, luberized bushing as per BS standard lever operated type complete in all respect all as directed and as specified. Note:- The butterfly valve shall be fitted between two flanges on either side of flanges. The valve edge rubber shall be projected outside such that they are welded within the pipe flanges to prevent leakages. Make :- Kirloskar / Leader / Kartar / Upadhyay

Supply and install of installation display board of size 4 x 3 feet made out of ECO printing lamination and mounting on ACP sheet board with back side MS channel frame and MS 2 pole 50mm square pipe with black paint, including PCC foundation complete all as specified and directed. Note-: Detail to be writing on board shall be as per site/ installation requirement.

Supplying, fixing, jointing and testing, cast iron body, in repair wafer type ISI marked, butterfly valve, 150mm dia conforming to IS-13095, pressure rating PN1.6, stainless steel SS 16(CF8M) disc, single piece SS 304 shaft, EPDM sleeve, luberized bushing as per BS standard lever operated type complete in all respect all as directed and as specified. Note:- The butterfly valve shall be fitted between two flanges on either side of flanges. The valve edge rubber shall be projected outside such that they are welded within the pipe flanges to prevent leakages. Make :- Kirloskar / Leader / Kartar / Upadhyay

Taking down copper/ aluminum point wiring surface type, concealed type, flame proof type (Light/Fan/Socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, socket, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces to walls floors etc.

M & L for point wiring with PVC insulated unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including PVC casing-caping and accessories, fixed on wall / ceiling etc with neccessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 2 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified for the following:

(a) One light / fan / bell point controlled by one switch.

(b) One 5A 2pin/3pin socket out let multipurpose on the same board with other switches.

(c) One 5A 2pin/3pin switch socket out let multipurpose on independent Board.

All as per item No. 127 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board

Note : A penalty of Rs 100 /- per point will be recovered from the contractor for not matching the disturbed surface with original.

Supply & Fix switch piano single pole flush type 5A, 240 V one way.

Supply & Fix Bell push flush type 5 amp, 230 Volts

Supply & Fix switch socket combination 2 in 1 , 5 Amps multipurpose flush type.

Supply & Fix switch socket combination 2 in 1, 3 pin, 5 and 15 Ampsflush type universal.

Supply & Fix Ceiling rose surface bakelite three terminal, 240 V.

S & F in repairs Ceiling fan regulator electronic stepped type, AC, 230 Volts, flush type.

Supply and fix bell ding dong AC 230 V single pole.

S&F in repairs Surface, hanging and wall mounted batten (Double side connection) suitable for LED tube 20/22 watts, 230 volts alongwith tube rod 22 watt (double side connection), including fixing mounting blocks 2 Nos, 15 mm MS conduit, 1.5 sqmm 3 core pvc insulated copper conductor cable including fixing arrangements complete all as specified and directed. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

S&F in Repairs/Replacement Ultra bright glass LED tube rod 20 Watts(Single/Double side connection), 230 volts with very high efficacy with G13 lamp holder including fixing arrangements and taking down old unserviceable tube rod complete. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

Supply and fix decorative recessed type LED light fitting 35/36 watt (size 2'x2') and including driver unit, including provision of 3 core copper flexible cable 1.5 Sqmm from ceiling rose to connector, including making addition/altn to existing false ceiling and providing of false ceiling sheets, aluminium frames including fixing arrangements complete etc. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

S&F in repair of building Security light fitting 35 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO/ CROMPTON

M & L for GI steel tubing medium grade 40mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge

Taking down carefully and Re-fixing of the same ceiling fan 1200mm sweep including provision of cable from ceiling nose/ conductor to fan and spray painting of ceiling fan with two coats of synthetic enamel paint, after preparation of surfaces, complete all as specified and directed.

Supply And Fix in repairs MCCB DB TPN 4 Way double door 125 Amps prewired suitable for Triple Pole 125 A MCCB as incomer with the following acessories, a) MCCB TP 125 A 25 KA 415 Volt - 1 Nos b) Bus bar, Din rail , Neutral link Make -Havells/Indoasaian/Legrand/ABB/Schnider

Supply And Fix in repairs MCCB DB TPN 8 Way double door 125 Amps prewired suitable for Triple Pole 125 A MCCB as incomer with the following acessories & connecting of existing cables & providing of acbel glands, a) MCCB TP 125 A 25 KA 415 Volt - 1 Nos b) Bus bar, Din rail , Neutral link Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB SPN 2 way 240 volts Single door, including connecting up with existing cable with new lugs The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB Double Door SPN 4 way 240 volts including connecting up with existing cable with new lugs. The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB Double Door SPN 8 way 240 volts including connecting up with existing cable with new lugs. The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB Double Door SPN 12 way 240 volts including connecting up with existing cable with new lugs The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

Supply & Fix in repairs MCB DB TPN 4 way 415 V double door with busbar including connecting up with existing cable with new lugs The DB Shall be of Make - Havells/Indoasaian/Legrand/ABB/Schnider

M&L for in repairs MCB SP, 240 volt, 5 to 32 Amps, 10 KA, C Curve, Make -Havells/Indoasaian/Legrand/ABB/Schnider

M&L in repairs MCB SPN, 240 volt, 6 to 63 Amps, 10 KA, C Curve, Make -Havells/Indoasaian/Legrand/ABB/Schnider

M&L in repairs MCB TPN, 240 volt, 40 to 100 Amps, 10 KA, C Curve, Make -Havells/Indoasaian/Legrand/ABB/Schnider

S&F single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified and directed. Make - indoasain/Legrand/Havells

M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 6 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed. (Make :- PRESFIT/ PRECISION - Casing caping), (Make :- FINOLEX/ KEI/ POLYCAB - PVC Copper wire) Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

M&L for earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the earth plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I, 2009 specification.

M&L for provn of Earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 4.25 M deep below normal GL) with top edge of the plate not less than 3.5M below normal GL, connected to Galvanized earth strip 32x6mm upto 7.5 mtr with protection pipe by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 40mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 5 of SSR Pt-I 2009 specification.

S&F GI strip size 25 x 4 mm all as directed including welding brazing and taking down of old copper strips as required at site

Note : A SUM OF RS 84138.00 TOWARDS SCHEDULE OF CREDIT SHALL BE DEDUCTED TO ARRIVE THE CONTRACT SUM

pk Enterprises (BID ID -3377808)

R J ENTERPRISES (BID ID -3377742)

sapana enterprises (BID ID -3377508)

M/S SOMANATH ENTERPRISES (BID ID -3377352)