Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.8 LAccepted-AOC 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹12.9 L+₹1.2 L (9.82%)Rejected-Finance 00 BACHUAPAR RAJESULTANPUR ALAPUR AMBEDKAR NAGAR UTTAR PRADESH 224176 | AMBEDKAR NAGAR | UTTAR PRADESH | 224176 | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹13.0 L+₹1.2 L (10.3%)Rejected-Finance 137 D6 ARAVALI HEIGHTS DPL DWARIKADISH ROAD DHARUHERA REWARI HARYANA 123106 | REWARI | HARYANA | 123106 | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹13.3 L+₹1.6 L (13.3%)Rejected-Finance RZ 18 260 WEST SAGARPUR NEAR MCD SCHOOL NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹13.7 L+₹2.0 L (16.8%)Rejected-Finance HOUSE NO 142 GALI NO 07 PREM VIHAR NANGLI SAKRAWATI NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | L5 | Rejected-Finance Other than Lowest |
Tender Value
₹17.6 L
EMD Value
₹35,260
Closing Date
2 Jan 2024, 6:00 pmClosed
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
GE UTILITY PLANT AND MACHINERY KIRBY PLACE DELHI CANTT-10
PROVISION OF 02 NOS HIGH MAST LIGHTS INSIDE CAMP AREA AT DCN SUB GP PALAM UNDER GE(U) PM DELHI CANTT-10.
2023_MES_632324_1
GE(U)/PM/D-58/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
DELHI CANTT-10
MES contractor enlisted under class E cat b(i) having deposited standing security of Rs 50000 with department. Contractor not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category.
6 documents required · 6 mandatory
₹500
GE UTILITY PLANT AND MACHINERY DELHI CANTT-10
₹35,260
Yes
14 Feb 2024
12 Dec 2023
4 Jan 2024
12 Dec 2023
2 Jan 2024
26 Dec 2023
Amount
Supply, installation, testing & commissioning of latching High Mast made up of Galvanised special steel confirming to IS , ASTM A -572/BS-EN-10025 continuously tapared 20 sided polygonal cross section suitable for high mast lighting system of 12.5 mtr High Mast shafts in two sections Top dia 200mm and bottom dia 460mm , and constructed from high tensile steel having minimum yield strengh of 355n/Sqmm, suitable for 55m/s wind speed or as per IS 875, with latching type head frame, winch mounting bracket, lumanaries, carriages suitable to install 08 Nos 170/180 watt LED lumanaries in symmetrical arrangement including 06 core 2.5 Sqmm multistranded copper conductor cable for connection of LED light filltings and Aviation light , and motor etc. complete ,including excavation and RCC foundation work as per OEM manufacturer design and provision of raising lowering system comprising double drum SWL of winch and 6 pole single speed, 6mm diameter SS wire rope( AISI 316 grade,7/19 construction) , trailing cable(suitable size as per OEM recommended) , connector, integral power tool motor 1 HP 415 volt ,(motorized operation) manual handle, junction box , incl outdoor type control panel for auto and manual operation for lighting & motorized system with comprising MCCB/MCB, suitable timer switch, contactor,volt& amp meter,raise & lower push button complete, including earthing connection and provide a single spike lighting finial of head frame at the top most point, and fixing of foundations bolts 08 Nos of size 850mm long 30mm dia manufactured from special steel along with nuts, washers, anchor plate and common template and incl single dome Aviation obstruction light comprising of aluminium housing with polycarbonate enclosure including Aviation light, lighting arrester complete and necessary excavation & earth work in any type of soil, foundation etc as per OEM inspection complete all as specified and directed.
Note:- (i) The contractor will make the high mast functional in all respect , if anything missed out , the contractor shall provide the same without any extra cost or claim to the department. (ii) The contractor shall submit warranty of material for two year from the certified date of completion. (iii)) Technical specifications for 12.5 Mtr High Mast Pole & Drg for foundation of pole is enclosed for respective OEM. (iv) Wind Tunnel Test certificate carried out successfully by reputed institutes should have with the manufacturer. (v) Only LED flood light shall be measured and paid seperately. Make :- Bajaj / Philips / Valmont
Supply and fixing LED flood light 170/180 watt ,240V AC outdoor type with thermal management in multiple optics, suitable for high efficiency 100 lm /watt and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp suitable for High Mast fitting complete all as specified. Make :- Bajaj praze F-216L of equivalent make / Philips / Valmont
Supplying laying XLPE insulated heavy duty electric cable size 35 Sqmm 4 Core 1100 volts grade with standard aluminium conductor served with an inner shething of PVC tape armoured with GI wire and over all PVC sheathed including laid in trench/passing throughpipe/duct/road crossing/surface of wall/in hume pipe etc including fixing hardware clamps, making good the damaged surface etc complete all as specified and as directed. (Make :- RR kabel/ KEI/ Polycab/ Havells/ Grandlay)
Supply, installation, testing and commissioning of powder coated outdoor type compartmentalized cubicle LT Feeder pillar box fabricated out of 3mm thick CRCA sheet steel weather proof vermin proof and suitable for operation on 415 volts, 50Hz, 3 Phase 4 wire AC supply complete with suitable gland for 35 sqmm XLPE cable alongwith gland plates, lifting hooks, ventilating louvers, bus bars, inter connections, earthing, labeling electrical interlocking, suitable for termination of cables including, supply and fixing of following switchgear and accessories in the panel. complete as required. The Make of panel should be CPRI approved and having protection IP 65. INCOMER : 1 no. 100 A, 415V, 25 KA, 4P MCCB with variable O/C, S/C & E/F Microprocessor based releases. 1 No. Digital type multifunction meter to show 0 - 500V, 0-100A, Kwh meter and set of cast resin C.T.'s of suitable ratio 1 set of Phase indicating lamp for RYB BUS BARS: 150 A TPN bus bars of aluminium alloy with epoxy based insulation. OUT GOING: MCCB TP 63 A, Thermal Magnatic release - 03 Nos (Make of MCCB :- L&T/ Legrand/ Siemens/ Indo-Asian/Havells) (Make of LT Panal :- Universal/ Switchgear/ Dvepl/ PSC/ GM & G/ ITE Gurgaon/ Neptune/ Hensel/ Indo asian/ Standarad/ Havells/ C&S Electric/ Bhandari/ Shalabh/ Adhunik Switchgear/ HPL/ Seepl/ ABB/ L&T / Siemens)
Material & Labour for Earthing complete with galvanised steel earth plate electrode 60cm x60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, including provision of galvanized earth strip 25x4 mm connected by means of bolts nuts, checknuts and washers of galvanized iron or steel, provision of 40mm dia GI pipe medium grade for earth strip protection connected from earth plate electrode to main switch board, provision of 20mm dia GI pipe perforated medium grade for entering arrangement and PCC 1:3:6 type CI chamber, MS funnel, wire mesh, 50mm thick RCC 1:2:4 type B1 for earth pit cover with 6 Nos 8mm dia high strength deformed steel TMT bars on both ways, including necessary excavation in any type pf soil returning filling in, removal of surplus soil to a distance n.exc.50m, provision of charcoal and salt complete all as shown in electrical plate No3 of Schedule Part-I 2009 all as specified and directed and testing on completion. Note :- (i) Cost of GI earth strip and GI protection pipe upto 7.5 Mtr length shall be deemed to be included in the rate quoted for this item.
Material & Labour,Earth continuity conductor or main earthing lead fixed to wall on batten or recessor chasesor buriedin ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc as required 25 x 4 mm galvanised iron strip complete all as specified and as directed.
Material & Labour for Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes / cables / poles etc., or for shafts, wells,cesspits,manholes,pier holes etc not exceeding 10Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
Material & Labour for Returning, filling in trenches/ Back, filling of retaining walls with approved soil, including spreading, levelling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed.
Material & Labour for Removing excavated soils to a distance not exceeding 50m and depositing where directed at level not exceeding 1.5m above the starting point complete all as specified and directed.
Supply and laying un-reinforced precast concrete cable cover Class LV type-I, flat size 250mm X 150mm X 40mm in trenches for cable protection ,embossed with ELECTRIC on the top surface complete all as specified and directed. (Make :- Mehtab Tiles / Pearless Industries / Hindmozaic Gujrat / JJ Concrete Lucknow)
Material & Labour Sand filling to the full width of trenches for protection of cables including spreading and punning down incuding watering and consolidation etc, complete al as specified and as directed. Note:- Punned thickness only will be considered for payment.
Supply and laying of GI pipe Light grade size of 50mm dia for cable protction and laid in trenches complete all as specified and directed. (Make :- Jindal/ Tata/ Oswal)
Material and labour for black top Road cutting size of Width 0.45M, Depth 0.6 Length-7.0 M for laying the pipe for cable protection including excavation,returning filling and disposal of the soil complete and including make a good as before with black Top Road complete all as specified.
SB ENTERPRISES
Shrikanth Solutions
P S TRADERS
S K ENGINEERS AND CONTRACTOR
Saini Enterprises
HARSHIT ELECTRICALS
mayur enterprises
Leo Network power systems
M P TYAGI ENGINEERS AND CONTRACTORS
M/s ELECTROSHINE ENGINEERS
S.Rose Enterprises
Commercial Traders
R. S. Associates
Standard enterprises
stage.html
html • 0.08 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .