PROVN OF CONFERENCE CUM WAITING ROOM, CHAINLINK

Amount

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m depth for foundation etc or for shafts wells, cesspits, manholes, piers holes etc n.exc. 10 sqm on plan and n.exc. 1.5 m on depth and getting out in any type of Soil complete.

Returning filling in soil incl spreading , levelling and well ramming in layers n.exc. 25 cm thick in layer etc all complete.

Surface excavation n.exc. 30 cm deep and avg 15 cm deep and getting out in soft/loose soil complete.

Removal of excavated surplus soil to a distance n.exc. 50 m and depositing where directed by Engr in Charge.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) in wall posts (incl post and bases complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe 290 (Gde E-165).

S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other or screw both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long exc 20 mm & n.exc. 25 mm complete.

M&L for cement concrete in foundation filling and mass concrete type B-2 1:2:4 ( 40 mm graded stone aggregate complete.

S&F steel work in tubular trusses incl special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete.

M&L for preparing new or previously untreated steel & iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over & incl a coat of red oxide primer complete.

M&L for hard core with broken stone or boulders of gauge 63 mm but n.exc.100 mm deposited spread & levelled in layers n.exc. 15 cm thick water & rammed true surface complete.

M&L for 100 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in sub base of flooring,hardstanding complete all as specified and directed.

M&L for glass dividing strips, 3 mm thick,38mm width, inserted in position in floors complete.

M&L for 100 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in floor finishing even and smooth without using extra cement including grenolothic concrete 1:1:2 floor topping 30 mm thick laid over cement concrete sub floors etc and finished to an even and fair surface.

M&L for Forming 12 mm thick expension joints in 100 mm thick concrete slab filled with preformed bituminius filler and top 30 mm primed and seal with sealing compound Grade-A complete.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, any type of Soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

S&F Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

Supply only Chain link MS galvanised fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only MS 10mm dia round bars as line wire for chain link fencing complete all as shown on drg and as directed

M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation of pillar Complete.

M&L for squared rubble masonary, jodhpur type, brought upto courses, well bonded and solidly hearted, built in cement mortar 1:6 all as specified and directed.

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of cement base paint over one coat of white wash complete.

S&F framed work such as in doors or gates of angle or other section with gusset plates rails, braces etc. complete drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks an d hinges or steel hanging doors fittings and hanging also fastening and fixing complete (GDE Fe 410 - 0– Fe 310-0

M&L For Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 Type D-2 using 40mm graded stone aggregate as in sub bases all as specified.

M&L for Brickwork with flyash bricks,modular size, straight or curved on plan to any radius in walls built in CM 1:6

M&L Rendering 10mm thick on fair faces of brick work or concrete surfacesin CM 1:6, Surface finished even and fair w/o using extra cement

M&L rendering 15mm thick in 1:4 cement plaster on brick masoanry surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including one or more coat of wall care putty on wall complete all as specified and directeded.

Finishing walls with Acrylic Smooth exterior paint of required hade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of Each tiles not exceeding 0.36 Sqm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. all as specified.

. --Ditto-- all as per item No 35 above but as in skirting over & including 10mm thick backing coat of CM 1:4 on brick masonary surfaces all as specified.

Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F mild steel butt hinges minimum weight 100mm size.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 150mm

S&F Aluminium handles, cast type, anodised of size 150mm long.

M&L for sheet glass 4.80mm thick, ordinary quality and glazing with, rubber packing exc 0.5 sq m in each pane complete

S&F 4 levers brass mortice lock vertical type, size 100mm including escutcheon plates and two kays complete

Supply and fix Aluminium (extruded section body), Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed

M&L for roughly squared stone 5cm thick as in lintels n exc 3m in length, hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete

M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete

M&L for 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection including finishing the surface even & fair W/o using extra cement

Material and labour for Granite(of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platfoRms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F for anodised aluminium snap grid 605 x 605 mm frame work for false ceiling all as specified and directedM&L for providing and fixing Gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions.

M&L for point wiring with PVC unsheathed cable single core stranded copper conductor 1.5 sq mm size, 1100 V grade, drawn into casing & caping (ISI marked) not less than 20mm dia on surface with and including PVC unsheathed cable single core copper conductor 1.5 Sq mm as continuous earth wire and including pressed MS sheet sunk in box 1.12 mm thick with 2.8 mm thick laminated bakelite sheet all as specified & directed by Engr-in-charge for the following :- (a) One light/fan/Exh/Bell point controlled by one switch 5 Amp one way

(b) -Ditto- all as per item no 50 but socket outlet 3pin 5 amps same board

(c) -Ditto- all as per item no.50 but socket outlet 3pin 5 amps independent board

-Ditto- all as per item No.50 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and directed by Engineer-in-Charge

S & F switch piano, flush type ,single pole , one way 5 amps 230V ac confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge .

S & F socket outlet 5 Amp , 5 pin flush type multi purpose 230V ac complete all as specified and directed by Engr in Charge.

S & F switch piano, flush type single pole , one way 15 amps 230V ac confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge.

S & F socket outlet 2 in 1, 3 pin 5 / 15 Amp , 230V ac cconfirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge.

supply and fixing fan regulator electronic type five step controlled 230 volt 50 Hz for confirming to IS: 3854 and ISI marked complete all as specified and directed by Engr in Charge .

S&F Sheet metal enclosure DB SPN 240 Volt 8 way double door type with 200 Amps rated bus bar for fixing MCB

S&F MCB SP 240 volts, 6 to 32 Amps, 10 KA, B Curve

S&F MCB SPN 240 volts, 32 Amps, 10 KA C Curve

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified.

S & F LED tube fixture/fitting 1x 20watt, decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy eficient ready to use prewired for including connecting up with twin core twisted flexible copper conductor cable with suitable size complete and all as specified and directed by Engineer- in Charge.”. Make: Havells/Philips/Bajaj/CG.

M & L for earthing complete with galvanized steel earth plate electrode 60x60x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'medium grade', watering pipe 20 mm dia GI 'Medium grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 5 of MES SSR Part-I 1991 print and as directed .

M&L for submain wiring with PVC unsheathed cable single core stranded copper conductor 6sq mm size, 1100 V grade, drawn through PVC casing and caping (ISI marked) not less than 25mm dia on surface with and including PVC unsheathed cable single core copper conductor 6.0 Sq mm as continuous earth wire and all as specified & directed by Engr-in-charge.

M/s Shri Inder Construction Company