Construction of 5 Class Rooms For Govt Higher Primary Kannada Boys School Examba in Examba Town in Chikkodi Taluka

2.5 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. ...

Addendum I-Additionalities for formwork, Centering & Scaffolding For Columns at 70% Complete as per direction of Engineer in charge.

Addendum II-Additionalities for formwork, Centering & Scaffolding For Beams & lintels of Buildings at 60% Complete as per direction of Engineer in charge.

Addendum I-Additionalities for formwork, Centering & Scaffolding For Chejjas, Canopy & Other Architectural projections of monor sections " at 45% Complete as per direction of Engineer in charge.

Addendum I-Additionalities for formwork, Centering & Scaffolding For Roof slab of Buildings at 50% Complete as per direction of Engineer in charge.

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned ,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm Complete as per direction of Engineer in charge.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

Providing & fixing of 3-track x 2-panel sliding windows made out of multichambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer)...

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ringconforming to IS : 5382, leaving 10 mm gap for thermal expa...

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.12.69.2 125mm Complete as per direction of Engineer in charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.Complete as per direction of Engineer in charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Complete as per direction of Engineer in charge.

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete

12.73.1 125mm Complete as per direction of Engineer in charge.

Hold fast Complete as per direction of Engineer in charge.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete Complete as per direction of ...

Providing and fxing good quality and standard make green board for writing with chalk inclusive all overhead charges etc complete as per BSI specification and direction of incharge Engineer. Complete...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70% Complete as per direction of Engineer in charge.

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60% Complete as per direction of Engineer in charge.

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned ,chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.12.69.2 125mm Complete as per direction of Engineer in charge.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Complete as per direction of Engineer in charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Complete as per direction of Engineer in charge.

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. Complete as per direction of Engineer in charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

12.73.1 125mm Complete as per direction of Engineer in charge.