CO Various office Accommodation in Level 59.00M, Level 62.60MKJ, Level 66.60M, Level 69.80M 4th Floor) at Existing Multistory Parking complex Tutikandi at Shimla SH Providing Fire Fighting System Fire Extinguisher thereof

Amount

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250 mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required.

Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required.

Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with 30 mtr long and 20 mm nominal internal dia heavy duty r water hose thermoplastic (Teitile reinforced )type II, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required.

Supply, installation, testing & commissioning of : Gun metal ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A')

Providing, fixing of 63 mm dia, 15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Gunmetal male & female instantaneous type coupling (IS 903).

Providing & fixing 63 mm dia Gun metal Braneh pipe with Gun metal with 20 mm (nominal internal dia) Size Gun metal Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903.

Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30"x24"x10") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words" Hose Cabinet" on the Box complete as requried.

Providing & fixing Gunmetal one set of 4 way Fire brigade connection with 4 nos. 63 mm dia gunmental male instaneous inlet couplings, complete with cap and chain as reqd., suitable for connecting to 150 mm dia pipe header conforming to IS 904 complete as required

Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm.

100 mm Dia.

150 mm Dia.

supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried.

Supplying installation,testing and commissioning of electric driven main fire pump DB 80/20 suitable for aotumatic operation and consisting of following complete in all respect as required.

Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 2280 LPM and 50 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% oftherated head.)

Suitable 50 HP SQ cage induction motor ,TEFC,synchronous speed 2900 RPM suitable for operation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class "F"insulation ,conforming to IS-325.

M.S fabricated common base plate,coupling ,coupling guard, foundation bolts etc.as required.

(D) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads.

Supply Insllation,testing,and commissioning Jockey pump with 10 HP SQ cage induction motor,TEFC,synchronous speed 2900 RPM,suitable for opreation on 415 volts,3 phase 50 Hz.AC with IP 55 protection for enclosure,horizontal foot mounted type with class "F"insulation,conforming to IS-325 for 180 LPM and 50 Metres head conforming to IS 1520 bronze impeller/SSansMechanical seal.MS fabricated common base plate,coupling,coupling guard,CC foundation etcas requried.

Supplying installation,testing and commissioning of Diesel Engine driven main fire pump suitable for aotumatic operation and consisting of following complete in all respect as required.

Horizontal type,centrifugal,spilt casingpump of cast iron body and bronze impeller with stainless steel shaft,mechanical seal and farthest outlet at specified flow of 2280 LPM and 56 Metres head conforming to IS 1520 (The pump shuld be capable of delivering 150% rated discharge at a head not less than 65% of the rated head.)

Suitable 2500 RPM diesel engine conforming to IS:649/IS:160/IS10002 all amended upto date, countnuous duty, multi cylinders vertical 4 dtroke cycle water cooled, developing suitable 43 BHP at operating speed specified to drive the fire pump capable of driving continous non-stop opreation for 8 hours having 10% overload capacity for one hour in a period of 12 hours continuous run ,capacity to accept full load within 15 seconds from the receipt of signal to start and complete with following accessories.

Dynamically balanced fly-wheel.

Direct coupling for pump and coupling guards.

Radiator with hoses .fan water pump,drivearrangement and guards

Air-cleaner dry type

Fuel tank with necessary pipe.

pump for fabricating oil and lubricating oil filter.

Electric starding system alongwith battery 12 V/24 V

Exhaust siliencer (residentail type) with necessary pipe work.

Governor

Instrument panel housing all the gauges including tachometer,hourmeter and starting switch with key (for manual starting)

Necessary safty control and stop solenoid in the event of fault.

Painted in post office red colour.

Common base plate fabricated out of MS channel of suitable size for assembling the pump and the engine fkexble coupling and with couplingguard for protection/safty.

Fabricating ,Supplying, installation, testing and commissioning of cubical construction floor mounted type, fabricating from 2 mm thick CRCA sheet compartmentalised withhinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having swichgear and accessories mounting and internal wiring, earth terminal numbering etc complete in all respect suitable for operation on 415 V .Three Phase, 50 Hz, Ac supply withencloser protection class IP 42 as required.

Incomer

OUTING

Mains Fire pump.

iii)Pump on LED Induication Lamp -1 No

b) Jockey pump.

iii)Pump on LED Induication Lamp -1 No

Diesel Engine Control

Control for Diesel Engine Comprising

d) System Controller

Designing supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Pump, Diesel Pump, Pressurisation Pump, in Sequence as per specification consisting of relay, timers, sensors,annunciation window for fault indication, complete as per specification

Providing & fixing of IS marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. (ISI MARK)

Providing and fixing Water CO2 9 .Litrs type fire extinguishers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. ( ISI MARK)

Providing & Fixing 4 Kg. ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & and C fire that is wood, textile, flammable liquids and gases.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size.

Armoured cable 120 sq. mm ( 3.5 core)

AVINASH FIRE PROTECTION SYSTEM

Koushal General Traders

HIMACHAL FIRE CONSULTANTS AND ENGINEERS