05/Sewage/BMC/2024-25

Amount

Blower With Air Compressor Air Ventilation Blower Explosion Proof - The light weight – 12" metal blower Aluminium alloy blades which makes low noise. Blower is fitted with Explosion Proof Motor and Switch and used in Factory II Type, Grade A, B and the Temperature T1-T4. The blower with Frequency - 50/60 Hz, Speed – 2800 r/min, Watts – 500, Voltage – 220/240, Flow rate – 65 m3/min, Pressure – 385 pa, with CE Marked & ATEX Certificate, along with Flexible Light weight Duct Hose, Made of Black Colour PVC Fabric, Supported with High Carbon Steel wire, Antistatic Used in Explosion Proof/Intrinsically Safe for Blower – Size : 12", Length : 15Mtrs

Sewer Inspection Camera Resolution :720*1280 ○Video/audio recording and image capture ○Storage: 8 GB SD(max 256gb) card or USB stick ○Battery life : 7 hour ○Screen size : 7 inch IPS color screen with total pixels 1024*600 ○Case material : Engineering plastic ○Cable length : 30 mtrs ○Cable size: ⌀330*110mm ○Display of meter counter ○Battery size : 4500 mm ○Working Time: 6 to 8 Hr. ○Camera size: ⌀23mm*144mm ○Box will have below accessories i. Wired keyboard ii. Skid iii. 8GB SD card iv. Allen key v. Charger vi. Connecting cables ○Suitable for 100 to 400mm Diameter pipe inspection

Face mask Disposable Triple layer face mask made of spun bond nonwoven consisting of three layers. Upper & lower layer made of PP spun bond 20 gsm ,20 gsm & paper filter in between. Ultrasonically Sealed with PVC coated nose clip. String Tie/ Loop Tie.

Operator/ Supervisor uniform As per D.O. Letter (Attached)

Raincoat 100% polyester fabric treated with a dwr finish to repel moisture. Fully seamed n selaed and topped to ensure total waterproof breathable protection.

Breathing Apparatus Volume of cylinder – 6 ltr ○Working pressure : 200 bar ○Work time: 30 mins ○Material : steel ○With complete accessories ○A proven pneumatic system approved by BIS specifications no. 10245 part II and ISI marked.i. Demand Wall ii. Back plate with harness iii. Pressure gauge and whistle iv. Full vision face mask ○Cylinder and valve should also be PESO approved. ○Should have below attachments

Air line Trolley for Breathing Apparatus SS Trolley Breathing apparatus consisting for cylinder with hose as per requirement up to 30 Meter & Full Face Mask . A long duration mobile compressed Air Breathing System for supplying breathing air from interchangeable high pressure, high capacity cylinders. Description : The Airline Trolley Systems is robust, made of stainless steel tubular structure on heavy–duty castors/wheels. A steel drum is provided with breathing hose and further provided Y piece is and hose for 2 men use .Good quality L.P. Hose crimped with quick release coupling suitable to attach with Demand Valve & Face Mask. The Trolley is designed to accommodate four steel cylinder 6 Ltr 300 Bar. The total effective duration is 3 hours. If used by one Man. Trolley has accessories like manifold , Pressure Reducer , pressure relief valve ,non-return valve ; the cylinders are connected is such away that when one cylinder is exhausted it can be replaced without interrupting the Flow of air from the other cylinders. Bleed valve is provided with each cylinders to replaced without interrupting the bleed off the pressure prior to removing the empty cylinder. Trolley Unit also has warning whistle to give audible alarm & pressure gauge at low and high pressure lines. Cylinders / Valves should be approved by PESO -Nagpur Complete set should be CE Mark & FACE MASK should be ISI approved.

Barrier Caution Tape Color : Red & white Made of PVC - Width 3 Inch in 250 mtr roll

Barrier Cone Made of pvc material Height : 750mm Base : 71 cm (380mm x 380 mm ) Color: Red with rubber base & hook provision on top reflective silver color with 4 inch

Search Light 6 watt LED light Working time : Upto 15 hours Rechargeable battery

Gas Mask Gas mask with ABEK1 filter IS 14746:1999 Approved

Swachata Commando Uniform As Per D.O Letter (Attached)

Rodding Machine Sewer cleaning/Rodding machine of Diesel Engine Operated with 5HP Air cooled Sewer cleaning/Rodding machine of Diesel Engine Operated with 5HP Capacity and ingle cylinder machine conforming to IS: 11931/2002 along with required accessories and with safety gears for operating. Sewer cleaning rodding machine is most effective for cleaning the choc ages and obstructions of different natures in sewer. It shall be capable of rotating pulling pushing series of specially sanctioned steel rods, which can be coupled together and then attach with various cleaning tools suitable for operation between manholes located at a maximum distance of 100 meters. The equipment shall be mounted on a trolley having two wheels. The equipment shall consist of spring chassis, one stabilizing wheel facilitating parking, manicuring and lower hook. The wheel shall be soiled rubber cushion tyre. The unit shall have AIR COOLED DIESEL ENGINE OF NOT LESS THAN 5 HP SINGLE CYLINDER DIESEL ENGINE. The accessories should include: 1. Hand Ratchet turning handle 2. Rod Coupling spanner 3. Rod Guide assembly 4. Push & Pull Tool 5. Point cutter 6. Sand Leader 7. Root saws 8. Auger 9. Double Bar cork screw 10. Assembly Tool 11. Bar Turning Handle 12. Pick up tool 13. Round Bar cork screw -2",3",4" 14. Adjustable foot jack 15. Rod guide jack 16. Assembly Turning Handle 17. Flexible Steel rods of 7mm diameter 1.2 meter long (As per IS:8052 with Test Report) The flexible steel rods shall have a length of 1.2 mtr. & 7 mm. dia. The Tolerance of metal rods shall be as follows. 1. Length: +- 10 mm 2. Diameter: 0.5mm. The Flexible rods shall be made out of steel confirming to IS: 8052-2006 (Grade 50Cr4V2) It shall have the following properties: Bend TestThe rods shall be cold bent up to 90 degree at a radius of 70 cms for the period of 5 minutes, after releasing the rods, if the maximum deflection observed exceed 10 mm the rods shall be rejected outright. Coating – The flexible steel rods along with coupling & nuts shall be electro galvanized up to 5 to 7 microns. Any rod found with serious seams and deep scratches will be rejected. Below is the physical test requirement of 7 mm wire as per 8052-2006 (grade-50Cr4V2) 1. Tensile strength- Minimum 150 Kg/mm as per table no-2-Physical properties of IS:4454 (Part3)- 1975. The testing shall be carried out in accordance with IS 1608-2005 (Third Revision) 2. Torsional Strength - Minimum 300Kg (The test shall be carried out in accordance with IS-1717- 1985. (Second revision). 3. Rockwell Hardness- C43+ - 2. The testing shall be carried out as per ASTM E 18.

POWER BUCKET MACHINE TECHNICAL SPECIFICATION OF SEWER CLEANING POWER BUCKET MACHINE: Sewer Cleaning Power Bucket Machine for cleaning underground sewers of main trunk sewers pipe size 6" upto 24". Consisting each set powered by 20BHP (DIN) 2000RPM.(Kirloskar /Reputed Make) TWIN CYLINDER AIR COOLED DIESEL ENGINE.with Test Certificate. Completed with Clutch control for Disengaging and engaging the drive to the winding drum with hand break for instantaneously stopping the drum. Drive assembly mounted on a two wheeled spring chassis with pneumatic tyre for towing and additional cushion rubber tyred wheel in swiveling caster for parking & maneuvering. Each set is consisting of two machines, fixed jib pattern type, or Truck loader type suitable for cleaning sewer. 1.Power Transmission - shall be safety booster belt type with tensioning device. Tension shall be adjustable and under overload condition, shall slip to protect sewer line and machine. Under full load working condition the power bucket travel speed shall be approximately 35 meter per minute in the sewer line and cable pull shall be around 1500 Kgs.The power bucket travel speed shall vary between 10 Mtrs per minute at the time of removing the loaded bucket from Manhole in the vertical direction and 50 meter minute under no load condition in the sewer line. All moving shafts shall be supported by recommended make of pedestal bearing for trouble free operation. 2.Clutch.Completed with Clutch control for Disengaging and engaging the drive to the winding drum with hand break for instantaneously stopping the drum. shall be used to allow smooth engaging and positive gripping with engine is pulling the Bucket . 3.Safety Arrangement- For safety measure against overload, an additional safety arrangement shall be incorporated in the power transmission system. The arrangement shall be rachet type and be effective as soon as the pull on the bucket exceeds the permissible limit.i.e.about 2,000 Kgs. A set shall be completed with all rigging accessories as follows. 1. 12mm dia steel wire rope of 6x 19 const with frames 300 Mtr. 2. 6 mm dia steel wire rope of 6x 19 const with 150 Mtr. 3. Swivel Shackles with ‘D’ Shackles 2 Nos. 4. Slant Manhole Jack 1 Nos. 5. Bull Dog Grip suitable for 12mm dia wire rope 6 Nos. 6. Surface Plat from complete with pipe clamps 2 Nos . 7. 375 mm Rollers with Frame 1 Nos. 8. 300 mm Roller with Frame 1 Nos. 9. Large Hand Hook 1 Nos. 10. Emergency Handle 1 Nos. 11. Winch Buckets suitable for 250mm.300m, 375mm, 400mm, 550mm Sewer size (1 No. Each Size)

Hand Gloves Material :Natural Rubber Liner : Cotton Flock lined Grip : Honeycomb Cuff : Straight Sizes : Large & Ex. Large Length /mm: 300 Thickness* (mm) / Weight* (g) : 1.00 (39 mil) Finish : Chlorinated PPE Regulation (EU) 2016/425 ASTM D4679 of 2002 EC/1935/2004

First aid box 60 Ml Dettol bottle, Soframycin cream 30 Grm, Small scissor made of SS, Cotton Bundle 20 Grm, Bandage, Medicines- Disprin , Combiflam, Vominil, Cheston cold, Lepex.

Safety Goggles ○Style i. Direct ventilation to allow cool air flow for comfort & prevent fogging ii. Frame produced from PVC material for chemical resistance iii. Over the glass compatibility iv. Small, compact, lightweight goggle v. Quality mark for assured performance ○Head Band i. Textile headband for user comfort ii. Side adjustment available ○Lens i. Hard coated lens designed to be abrasion resistant & provide good visibility ii. Provides good Impact & UV protection

Safety Tripod Set • Portable device for confined space entry and retrieval • Height : Adjustable b/w 1.25 and 2.15 meter • Material : High strength aluminum alloy • Strength : 22 KN • Safe working load limit : 200kgf • Standard : EN795 – class B • Maximum load capacity : 100 kg • One winch : 10 meter long • One retractable Block : length 10 meter • One full body harness • Packed in a kit bag • One full body harness • Packed in a kit bag

Namanshree Designer studio