Call Basis Preventive Maintenance of EMS and Misc Electrical works in various Telephone Exchanges Colonies under BA Lucknow in Jurisdiction of ESD I,Lucknow

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. (a) 2 x 1.5 sq. mm

(b) 3 x 1.5 sq. mm

© 3x2.5 Sq.mm.

(d) 3x4 Sq.mm.

S/F of following item in exsiting MV panel /MCB DB /Pole Box /free cooling i/c dismentling of faulty unit (if reqd ) i/c ,connections, testing etc comp as reqd. (Make--Legrand or similar superior make).(a) 6-32 A SP MCB 230 V

(b) 6-32 A DP MCB

© 63 A 4 Pole Isolator

(d) 6-32 A TP MCB

(e) LED Type Indication lamp(R,Y,B)

(f) 100 A 4 Pole Isolator

S/F of following electrical items in existing Electrical Installation ,Compound light I/c dismantling of existing faulty items (if required ) and connection, testing etc. as reqd.( Note- All spare of lighting systen should be of Make -Bajaj/crompton/philips /havells /wipro ) (a) 20 Watt LED Batten

Electronic Ballast suitable 36 / 40 Watt tube fitting

Flu tube Starter

Side Holder for all type Tube Light fitting

2.5 to 4 MFD MPP capacitor for fan

5 Amp. Piano Type switch.

3 Pin ,5 Amp. Socket outlet.

15/16 Amp. Switch.

15/16 Amp , 3/6 pin Socket outlet.

Ceiling rose

Batten Holder

4 " dia PVC Round Sheet with screws

5 A Plug Top

15 A Plug Top

2 module Stepped type electronic fan regulator

Ding Dong bell

63 A Porcelene rewirable KIT KAT fuse unit complete

100 A Porcelene rewirable KIT KAT fuse unit complete

200A Porcelene rewirable KIT KAT fuse unit complete

Neutral Link and insulators

Lugs 16 sqmm

Lugs bottle type /10 sqmm/16 sqmm/25 sqmm

Bakelite sheet 6mm for Kit Kat Board

Angle Iron 35x35x5 mm for Kit Kat Board

4ft-36/40w Flu tube

Hylem sheet

9w LED Bulb

9w LED Bulk head

GI Bracket for Street Light

Supplying and fixing of following size of flexible round copper cable on surface/ recess with suitable clamp , suitable for work on 230 volt, 50 HZ AC supply i/c connection etc as reqd ( Make -Polycab/Havells/Finolex ).(a) 2x1.5 sq mm

(b) 3x1.5 sq mm

© 3x2.5 sq mm

Rewinding of following fan motor with suitable gauge copper winding wire I/c dismantling, servicing, replacement of bearing/bush and reinstallation, testing etc. as reqd.(a) Ceiling fan up to 1400 mm size

(b) Exhaust fan / Wall mounting fan up to 450 mm size

S/F of following size energy efficient Ceiling fan suitable for operation on 230 Volts ,single phase 50 Hz AC supply complete etc as reqd without regulator)Make -( Bajaj/Polar /USHA /crompton /havells /orient ) (a) 1200mm

SITC of 400 mm sweep oscillating type wall mounted fan with three speed control regulator having metalic body and metal blade ,1360 RPM speed suitable for working on 230 V 50 Hz single phase AC supply & i/c fixing on wall with suitable fastner , connection etc. complete as required (Crompton/Bajaj/orient/polar/Almonard/ USHA)

Supplying and laying of following size of pvc insulated pvc sheathed 1.1 kv grade Aluminium conductor cable confirming to relevant IS-Specification i/c fixing on wall surface with suitable GI Shaddle /in air a/w GI Wire /in pipe /in recess /ground etc complete as reqd. (Make -Polycab/havells/finolex)- (a) 2 x 6 Sqmm weather proof

(b) 4 x 16 Sqmm armoured

Supplying and making end termination with brass compression gland & aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as reqd. (a) 4 X 16 sq. mm (28mm)

S/F of 20 mm wide PVC cassing capping on wall /roof with suitable screw etc as reqd.

S/F of 63 amps four pole ON load change over switch in sheet steel enclosure capable of working 415/500 V i/c fixing the same on wall /pole with suitable clamp/fastner i/c drilling hole , making connection, earthing the body etc. i/c dismenting of existing faulty unit (if required at site)as reqd. (HPL or SS Make)

S/F of 63Amp TPNSDFU Switch in steel enclosure alongwith 3nos 63 amp HRC Fuses capable of working 415/500 V i/c fixing the same on wall /pole with suitable clamp/fastner i/c drilling hole , making connection, earthing the body etc. i/c dismenting of existing faulty unit (if required at site)as reqd. (HPL or SS Make)

Supply & Fixing of following LED street Light Fiiting complete with all accessories etc complete as reqd. (M/s Havells/ crompton or SS make) .(a) 25 Watt street light fitting

(b) 45/50 watt street light fitting

SITC of Energy Efficient 25 Liter storage water heater with copper heating element with 3 layer safety with adjustable knob for temp setting suitable for work on 230 volt AC supply i/c 15 A Three Pin Top fixing on wall with suitable fastner i/c removing of exiting faulty unit (if required) with two year comprehensive warranty etc as reqd.(M/S Bajaj-New Shakti GL/ Crompton ARNO etc)

Reapairing of all type of geyser i/c replacement of filament/ thermostat, cleaning of scale etc as reqd.

S/F 300 mm sweep Exhaust fan with powder coated metallic blade with bird guard to protect the fan, Air flow rate: 510 cmh , Speed: 1350 RPM suitable for operation on 230 Volts ,single phase 50 Hz AC supply i/c fixing on wall with suitable screw i/c remocing of existing faulty unit complete etc as reqd (Make -( Havells Ventil air /Bajaj/Polar /USHA /crompton /orient )

S/F of following size power strip for operation on 230V 50 HZ AC supply on surface i/c connection etc. complete as required. (a) 4 way 5 Amp power strip

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.(a) Group A

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

(b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

© 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.(a) 180 mm X 100 mm X 60 mm deep

(b) 200 mm X 250 mm X 100 mm deep

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.(a) 3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(a) 5/6 amps switch

(b) 15/16 amp switch

© 3 pin 5/6 amp socket outlet

(d) 6 pin 15/16 amp socket outlet

(e) Bell push

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) 2 + 8 way, Double door

(b) 2 + 12 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) 4 way (4 + 12), Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.). (a) 4 way (4 + 12), Double door

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) 40 amps

(b) 63 amps

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.