gravitational distribution network for Village Muhewal, Tarapur and construction of X-Drainage cum bridge including supply, installation, testing and commissioning of various valve fitting, air valve etc. complete in all respects for area of village

Amount

Jungle clearence

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects (A) Earthwork upto 1.5 Meter Depth (ii) ordinary soil having gravel upto 40 percent

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.(a) Earth work upto 1.5 m. Depth for (i) All classes of soil except rocky

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.(a) Earth work upto 1.5 m. Depth for (ii) For Ordinary soil having gravel upto 40%

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.(a) Earth work upto 1.5 m. Depth for (iii) For semi conglomerate soil of having gravel/Boulder upto 50%

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. B Mechanical Means (a) Depth upto 3m

Dismantling of Flexible Pavements(Bituminous Courses)(By Manual Means) (a) Dismantling of bituminous courses of flexible pavements by manual means and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications

Cement Concrete 1:4:8 with (i) stone ballast 20mm gauge (PCC) mixing by mechanical means using concrete mixer volumetric type.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Cement concrete 1:3:6 (i) with stone ballast or shingle (i) mixing by manual means

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

12.5 mm thick cement plaster 1:4

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in postion complete.

Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or bartering including attached pillasters buttersses etc )

Shuttering for precast and plain or Reinforced concrete blocks, wall plates, bedplates, shelves etc.

Centring and shuttering for columns (circular or curved in plain)

Supply and installation of alfa valve including fittings etc complete in all aspects. 160 mm

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

20mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded.

12.5 mm thick cement plaster 1:3

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Providing & Fixing M.S Angle iron 40x40x6mm chowkhat i/c iron hold fast butt hinges fixed in position complete in all respect.(a) For single rebate

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material

Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work

Supply and installation of pump and electric motor including electrical and mechanical fitting complete in all aspects having discharge 4.82 lps and service head of 29 meter

supply of double acting air release valve fitted with vaccume control valve for main riser

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (350 mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (200mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (125mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (100mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves (80mm) ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Providing & fixing double air valve ISI Marked as per IS-14845 including jointing all carriages complete. (c) CI double air valve (65mm)

Nuts & Bolts of all sizes and length required

Providing & Fixiing C.I indicating plates of size 100mm x 100 mm for SV/FH including synthetic enammel paint & letters in white enamel paint, fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including conrete block complete in all respect as directed by Engineer-in-charge

Providing, Stringing out P.V.C. Pipes (315mm o/d pipe of 6 Kgf. / sqcm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes (225mm o/d pipe of 6 Kgf. / sqcm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes (160mm o/d pipe of 6 Kgf. / sqcm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes (140mm o/d pipe of 8 Kgf. / sqcm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes (125mm o/d pipe of 6 Kgf. / sqcm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes (90mm o/d pipe of 6 Kgf. / sqcm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes ( 75mm o/d pipe of 10 Kgf. / sqcm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes (63mm o/d pipe of 6 Kgf. / sqcm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes (50mm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes (40mm o/d pipe of 6 Kgf. / sqcm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing, Stringing out P.V.C. Pipes (32mm) ISI Marked as per ISI-4985 (Premium Make such as Supreme / Finolex/Prince) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.f() 50mm i/d

Cement concrete 1:2:4 (a) With stone ballast or shingle (i) by manual means (for protection of GI Air vent)

Supply of MS pipe (Heavy)(IS1239/3589/4270) (o) 350 mm i/d 9.50 mm thick

Structural steel work in angles, tees and flats, riveted or welded including cutting fixing all gusset plates, bolts, nuts, rivets, welding rod, etc. with hoisting and erecting in position :- For roof trusses, well curbs, plates and trussed girders, etc. of any span for buildings and bridges up to 15 m span.

Any Other Item

M/s Jaswant Rai Verma