Balance Air Conditioning Work for Floor-5 of Hospital Block of Indira Gandhi Medical College and Research Institute at Kadirkamam, Puducherry

Amount

Refrigeration Plant Water Chilling Units

Supply, installation, commissioning & testing of 250TR water cooled screw type chilling unit, as specified & shown in the data sheet (WCU) complete with: i) Loading, unloading, civil works & lifting into position ii) Full charge of refrigerant iii) Vibration mounts & flexible connections iv) Microprocessor Based Control Panel v) Bacnet compatible protocol to integrate operation with 3rd party Building Management System. vi) Starter and isolator as specified

Chiller Management System for upto 3 chillers (2 Working + 1 Future)

Cooling Tower Supply, Installation, Testing & Commissioning of Induced draft cooling towers as specified and shown in the data sheet (CLT) consisting of: a) All internals & externals, access ladder. b) Fans, motors & drives. c) Supporting arrangements & Platform in structural steel at 3m above floor plus maintenance platform including civil works d) Flexible connections & Vibration isolators e) Earthing of motor etc. Cooling towers as per data sheet CLT

Chilled Water Pumps Installation, testing & commissioning of existing pumps as specified and shown in the data sheets consisting of: (Pump will be Supplied by IGMC & RI) i) Flexible connections including civil works ii) Earthing of motor & frame iii) Flexible connectors on both sides & Vibration Isolators Note: the existing motor shall be checked before installation

Primary Chilled water pumps with insulation- Data sheet CHWPP

Secondary Chilled water pumps with insulation- Data sheet CHWSPS

Condenser water pumps with insulation. Data sheet CDWP

Air Handling Units Supply, Installation, Commissioning & Testing of Double Skinned Air Handling Units as specified and shown on drgs. and on data sheets, flow diagram etc. and consisting of: i) Fan section & flexible connections on supply and return ii) Cooling coils iii) Prefilters, microvee filters & HEPA filters as specified iv) Drain pan v) Motors with drive package, starter panel with starters / VFD with electrical power & control cabling from starter to motor, earthing of motor electrical reheat generally as per data sheets vi) Return fan section, HR section for TFA units vii) Necessary vibration isolators & supporting frame as specified in data sheets, including civil works viii) 25mm dia ball valve

Air handling unit to OT 1 AHU-5-1

Air handling unit to OT 2 AHU-5-2

Air handling unit to OT 3 AHU-5-3

Air handling unit to OT 4 AHU-5-4

Air handling unit to OT 5 AHU-5-5

Air handling unit to OT 6 AHU-5-6

Air handling unit to OT 7 AHU-5-7

Air handling unit to OT 8 AHU-5-8

Air handling unit to Sterile Area AHU-5-9

Air handling unit to Corridor & Doc's Lounge AHU-5-10

Air handling unit to OT Store,OP ward & OP Holding AHU-5-11

Air handling unit to Relative Cubicle For Men AHU-5-12

Air handling unit to IMCU AHU-5-13

Air handling unit to Surgical ICU -1 AHU-5-14

Air handling unit to Surgical ICU -2 AHU-5-15

Air handling unit to Corridor at Surgical ICU AHU-5-16

Air handling unit to Respiratory ICU AHU-5-17

Air handling unit to Main Corridor & Relative Waiting Area AHU-5-18

Air handling unit to Relative Cubicle For Women & Corridor AHU-5-19

Air handling unit to Pediatrics ICU AHU-5-20

Air handling unit to Gynaecology ICU AHU-5-21

Air handling unit to CCU AHU-5-22

Air handling unit to Pre Function & Lecturer Theatre AHU-5-23

Air handling unit to Anaesthesiology Department AHU-5-24

Air handling unit to Septic OT AHU-5-25

Air handling unit to Clean OT1 AHU-5-26

Air handling unit to Clean OT2 AHU-5-27

Air handling unit to Corridor at Court 2 AHU-5-28

Air handling unit to Anti Natal & Post Natal Ward AHU-5-29

Air handling unit to Clean Labour Room AHU-5-30

Air handling unit to Septic Labour Room AHU-5-31

Air handling unit to Post OP Ward & Corridor at Court 2 AHU-5-32

Sheet Metal Ducting, Air- Conditioning System (Factory made only) Supply, fabrication and erection of galvanised sheet metal ducting generally as specified including civil work complete with i) Galvanised companion flanges girth angles. ii)Turning vanes. iii) Galvanised structural support systems. iv) Sealing gasket to meet specifications v) Painting of all duct supports and exposed ducting

0.63mm (24 G) galvanised sheet steel

0.80mm (22 G) galvanised sheet steel

1.00mm (20 G) galvanised sheet steel

Dampers Manual Volume control dampers as specified.

Splitter dampers as specified.

Fire & smoke dampers with actuator, transformer as specified for the size given under

Upto 0.3 sqm

From 0.3 sqm to 0.6 sqm

From 0.6 sqm to 0.9 sqm

From 0.9 sqm to 1.2 sqm

More than 1.2 sqm

Supply and installation of Return air extruded aluminum Powder coated grills as specified and complete with i. 10mm Margins ii. Circular / square or rectangular as shown in drawings

Supply & Return air diffusers of extruded aluminum, powder coated as specified and complete with: i) Flush or stepdown ii) 20mm flanges with PVC gasket iii) Mild steel butterfly damper or in-built damper. iv) Circular, square, rectangular or as shown on drawings. v) 1-way, 2-way, 3-way as specified Note : From AHU to OT and related works are part of the OT Vendor scope.

150 x 150 square

225 x 225 Square

300 x 300 square

375 x 375 square

Thermal & Acoustic Insulation Thermal insulation for indoor ducts as specified complete with Al.foil faced nitrile rubber Insulation

19 mm (SA ducts running in airconditioned space)

25 mm (SA ducts running in non airconditioned space)

13 mm (RA ducts running in airconditioned space)

25 mm (RA ducts running in non airconditioned space)

Thermal insulation for outdoor ducts as specified complete with: i) Insulation with phenotherm with foster coating ii) Vapour barrier iii) Final finish as specified. 50mm thick

Duct acoustic insulation generally as specified and complete with: 25 mm thick Armasound

Plant room acoustic insulation generally as specified and complete with: i) Insulation ii) Framing GI channel frame work as specified. iii) Finish with 0.8mm thick perforated aluminium sheet. 50mm thick (for AHU rooms only)

underdeck insulation generally as specified and complete with: 19mm thick Closed Cell Nitrile Rubber Insulation

Ventilation & Exhaust Systems Ventilation Fan Systems Supply, installation, commissioning & testing of VENTILATION SYSTEMS in accordance with and meeting the intents 'of the specifications and data sheets including civil works complete with:

Toilet Exhaust Fan to data sheet TOI - EF 1,1Phase, Slimline Axial Fan,2500 RPM,Kruger DWA Series OR Equivalent

Toilet Exhaust Fan to data sheet TOI - EF-2, 1Phase, Slimline Axial Fan,2500 RPM,Kruger DWA Series OR Equivalent

Toilet Exhaust Fan to data sheet TOI - EF-3,1Phase, Slimline Axial Fan,2500 RPM,Kruger DWA Series OR Equivalent

Toilet Exhaust Fan to data sheet TOI - EF-4,1Phase, Slimline Axial Fan,1300 RPM,Kruger APM Series OR Equivalent

Toilet Exhaust Fan to data sheet TOI - EF-5,1Phase, Slimline Axial Fan,1300 RPM,Kruger APM Series OR Equivalent

Exhaust Fan for Dirty Corridor to data sheet TOI - EF-6,1Phase, Slimline Axial Fan,1300 RPM,Kruger APM Series OR Equivalent

Piping & Insulation Supply & laying of MS piping generally as specified including civil works with complete (Including Dismantling existing pipes)

350mm dia Nominal Bore

300mm dia Nominal Bore

250 dia Nominal Bore

200 dia Nominal Bore

150 dia Nominal Bore

100 dia Nominal Bore

80 dia Nominal Bore

65 dia Nominal Bore

50 dia Nominal Bore

40 dia Nominal Bore

32 dia Nominal Bore

Supply and laying of RCC Hume Pipe for Burried Piping crossing roads including civil works Dia 600mm

Supply and laying CHILLED WATER PIPING WITH INSULATION - BURRIED including Civil Work

Dia 300mm - (6.35 mm thick)+ 75 mm thick insulation (Puff Insulation with HDPE Jacetting)

Dia 250mm - (6.35 mm thick)+ 75 mm thick insulation (Puff Insulation with HDPE Jacetting)

Insulation as per specifications over pipe of following NB including valves etc. as specified complete with finish specified Indoor

300 dia Nominal Bore (Puff Insulation -50 mm)

250 dia Nominal Bore (Puff Insulation -50 mm)

200 dia Nominal Bore (Puff Insulation -50 mm)

150 dia Nominal Bore (Puff Insulation -50 mm)

100 dia Nominal Bore (Puff Insulation -50 mm)

80 dia Nominal Bore (Puff Insulation -50 mm)

65 dia Nominal Bore (Puff Insulation -50 mm)

50 dia Nominal Bore (Puff Insulation -50 mm)

40 dia Nominal Bore (Puff Insulation -50 mm)

32 dia Nominal Bore (Puff Insulation -50 mm)

Insulation as per specifications over pipe of following NB including valves etc. as specified complete with finish specified outdoor.

200 dia Nominal Bore (Puff Insulation -50 mm with Al.Cladding)

150 dia Nominal Bore (Puff Insulation -50 mm with Al.Cladding)

100 dia Nominal Bore (Puff Insulation -50 mm with Al.Cladding)

80 dia Nominal Bore (Puff Insulation -50 mm with Al.Cladding)

65 dia Nominal Bore (Puff Insulation -50 mm with Al.Cladding)

50 dia Nominal Bore (Puff Insulation -50 mm with Al.Cladding)

40 dia Nominal Bore (Puff Insulation -50 mm with Al.Cladding)

32 dia Nominal Bore (Puff Insulation -50 mm with Al.Cladding)

Supply and laying of m.s heavy class piping for drain piping complete with 25mm thick polystyrene or 12mm polyflex generally as specified

100 dia Nominal Bore

50 dia Nominal Bore

Supply & installation of Ball valves complete with holding & mating flange joints as specified. Ball valves

50 dia Nominal Bore

40 dia Nominal Bore

32 dia Nominal Bore

25 dia Nominal Bore

Supply & installation of butterfly valves and Balancing valves complete with holding & mating flange joints as specified. Butterfly valves

300 dia Nominal Bore

250 dia Nominal Bore

200 dia Nominal Bore

150 dia Nominal Bore

100 dia Nominal Bore

80 dia Nominal Bore

65 dia Nominal Bore

Balancing valves 350 dia Nominal Bore

250 dia Nominal Bore

200 dia Nominal Bore

150 dia Nominal Bore

100 dia Nominal Bore

80 dia Nominal Bore

65 dia Nominal Bore

50 dia Nominal Bore

40 dia Nominal Bore

32 dia Nominal Bore

Supply and installation of NR valves & `Y' strainers complete with mating flange joints as specified.

350 dia NR valve

300 dia NR valve

300 dia `Y' strainer

250 dia `Y' strainer

250 dia NR valve

200 dia `Y' strainer

200 dia NR valve

200 dia `Y' strainer

100 dia `Y' strainer

80 dia `Y' strainer

65 dia `Y' strainer

50 dia `Y' strainer

40 dia `Y' strainer

32 dia `Y' strainer

Supply and installation of Flexible Connection.

300 dia Nominal Bore

250 dia Nominal Bore

200 dia Nominal Bore

Supply and installation of solenoid valves (For make up Tank) 40 dia Nominal Bore

Supply & Installation only of Pressure Independent type balancing cum control valve with flanges, unions as required.

100 dia Nominal Bore

80 dia Nominal Bore

65 dia Nominal Bore

50 dia Nominal Bore

40 dia Nominal Bore

32 dia Nominal Bore

Providing instruments, gauges and sundries etc. as specified.

Thermowells

Thermometers/Temp. indicator

Pressure probe

Pressure indicator flexible copper tubing.

20mm automatic air vents with valves

Air separator

Supply and installation of 3.0 m3 closed expansion tank as specified complete with: i) M.S factory fabricated tank with mounting base ii) All necessary valves, flanges and associated fittings iii) Air Separator iv) Drain connection v) Pressurisation Unit

Installation testing & commissioning of existing various sizes / types valves ( Valves will be supplied by IGMC & RI)

Masonary Work Masonry work for making good the open wall surface for pipe lines and ducts using bricks, cement, sand etc., including plastering, the rate including labour, scaffolding and accessories etc. This include core cutting of RCC beams/slabs of various sizes where ever required. All works shall be carried out as per the directions/approval of the Engineer in charge

GEMINI COOLING SYSTEMS PROJECTS PRIVATE LIMITED

V K Building Services Pvt Ltd

VAV Airconditioning