labour charges for fabrication and erection for steel structures, erection and earthing of equipment supply of MS materials for 110KV Bay extension at Vijaypuri 110 33 11KV Sub Station in Tuticorin Electricity Distribution Circle

Amount

Earth work excavating, depositing on bank with an initial lead of 10m and lift of 2m in a) Hard stiff clay, stiff black cotton, hard red earth, shales,murram,gravel,stoney earth and earth mixed with small size boulders

Earth work excavating, depositing on bank with an initial lead of 10m and lift of 2m in b) Soft disintegrated rock, latterite soft rock or kankar not requiring blasting

Earthwork excavating, depositing on bank with an initial lead of 10m and lift of 2m in medium rock and dense medium rock not requiring blasting

PCC 1:3:6 using 40mm HBS jelly including cost of all materials, lead,lift etc., complete without form work.

PCC 1:3:6 using 40mm HBS jelly including cost of all materials, lead,lift etc., complete with form work

Plastering with CM 1:3, 12mm thick including cost of all materials, lead, lift, curing etc., complete

Labour charges for painting of RCC poles, plinths of structures etc., with two coats of snowcem over one coat of white cement including cost of paint and other materials, lead, lift, curing etc., complete

Labour, machinery, Consumables for the Fabrication for steel structures Heavy section (14 kg/m and above)

Labour, machinery, Consumables for the Fabrication for steel structures Light section (below 14 kg/m)

Labour for the Erection of the Fabricated Steel Structures Heavy section (14 kg/m and above)

Labour for the Erection of the Fabricated Steel Structures Light section (below 14 kg/m)

Labour, machinery, consumables for fabrication, erection of earrthmat, earth connection (including Green colour painting), earth electrode, earthspike (including sharpening of earth spike). As directed by the field engineer.

Labour charges for providing earth spike with G.I pipe including fabrication of base frame,painting and fixing as per departmental specification,excluding cost of G.I pipes,M.S Flats,base angles., etc.

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer. (Earth to be supplied by the contractor).

Supply and providing of 450-600mm dia 300mm height 36mm thick cement collar with top cover for idrntification of earth electrode location as directed by the field Engineer

Supply of paint of reputed make and Labour,consumables for first primer coat using red oxide Paint and first finish coat of Painting using Aluminium Paint including consumables, after proper surface preparation using appropriate machinery to remove rust/scales etc as directed by the field engineer .

Supply of paint of reputed make (ie Asian,Dulux,Nerolec paint) and Labour for Second coat of Painting using Aluminium paint including consumables.

Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer.110 KV AB Switch with earth

Labour for the erection of Insulator single pole stack for supports Uprights / Underhang including Meggering & other consumables and as directed by the field engineer. 110 KV .

Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer. 75 mm (1 length)

Labour for the Erection of Jumper / Droppers using Moose / Zebra / panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Labour for the Erection of Jumper / Droppers using Moose / Zebra / panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.30% extra charges for Line Clearance Work.

Supply and Erection of 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs &2.5inch dia for 2mtrs)including single/double fitting fixing arrangements,1 inch dia B class pipe arms,yard light box fixing flat and one coat of redoxide and Two coat of Aluminium paint.

Supply and Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) G.I Sheet as per drawing , provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connenectors including its cost materials, consumables, VAT, frieght, etc and as directed by the fiels engineer on site requirements. (The box shall be vermin proof,shall be provided with sturdy hinges,with provision for cable entry and locking arangements).

Supply and Erection of 1x72W , 240V LED street light Aluminum case fitting Make-CGL / PHILIPS. (inclusive of all taxes).

Labour charges for laying of control/ yardlight cable by digging cable trench of size 0.3m x 0.6m filling with for a depth of 0.2m, covering with one layer of country bricks and refilling with excavated earth and including cost of sand and bricks,etc.

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110KV Isolators

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation Cable/Conductors including cutting and rewinding

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation BusBars

Labour for loading /unloading /shifting of Department materials at stores or site by the contractor without using Board crane for one operation 110KV insulator

Suppl;y and Fixing of Godrej 6lever navtol lock with triplicate keys for AB Switches and for any other purpose including the cost of ring and key token as directed by the fiels Engineer

Supply and fixing of key chain ,ring and identification key token for A.B Switches as directed by the field Engineer

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch End Clamp for Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. Switch End Clamp for 75mm Bus

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. T Clamp for 75mm Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, including VAT, frieght etc., confirming to IS confirming to IS as per the drawing and specification. 75mm Corona Bell

Supply of "B" class G.I.pipe for extension of tandem/down pipe for A.B.Switches and for any other work required as directed by the field engineer. 40mm Dia

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 40 mm M.S Round Rod

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 65x 10 mm M.S.Flat

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 50x 8 mm M.S.Flat

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 200x100mm RS Joist

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 125 x 65 mm M.S.Channel

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 100 x 50 mm M.S.Channel

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 65 x 65 x 6 mm M.S.Angle

Supply of steel items asper TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete. 50 x 50 x 6 mm M.S.Angle

Supply and Provision of M8,M10,M12&M16 (full /Half thread) G.I Bolt and Nuts of Various Sizes including Plate /Spting washers as required and as directed by the field Engineer

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

C ILANGAMANI

C VADIVELMURUGAN CONTRACTOR