PAINTING AND POLISHING AND CERTAIN REPAIR OF STEEL AND WOODEN FURNITURE ARTICLES AT HQ WACU UNDER GE AF SUBROTO PARK DELHI CANTT 10

Amount

M&L for preparation of old painted iron & steel surfaces (externally and internally complete) of following furniture items by scraping & rubbing down with grinder machine, removing dents and scratches if any filling the same with paste filler and applying two coat of synthetic enamel paint by spray equipment of 1st Grade quality,(Shade/colour shall be approved by engr-in charge) complete. Rest all as specified and directed by engr-in-charge.

Almirah large with shelves steel.

Almirah med/small steel with shelves.

Locker bedside steel.

Book shelf open large steel steel.

Table with drawer 900mmx600mmx760mm (steel)

Table steel 900mmx600mmx760mm

Table steel 900mmx900mmx760mm.

Table office clk steel.

Table office offr steel.

Chair CB steel with arms.

Table bed side (MAP)

Bed Hard (MAP)

Chair executive revolving high /medium/low back, chair computer, chair writing, chair conference, chair visitor etc.( FD/MAP/ TP)

Rack 6 tier

Rack pigeon hole

Almirah glazed large steel.

Teapoy Varandha steel

Table computer MAP/TP

M&L for preparation of old painted iron & steel surfaces (externally and internally complete) of following furniture items (TP) by scraping & rubbing down with grinder machine, removing dents and scratches, if any, filling the same with paste filler and applying two coat of hammerton powder coating paint of 1st Grade quality externally and with two coats of ist grade synthetic enamelled paint internally by spray equipment,(Shade/colour shall be approved by engr-in charge) . Rest all as specified and directed by engr-in-charge.

Almirah large1/2H hanging 1/2Shelf steel.

Almirah large steel with shelves

Book case steel

Almirah med/small steel.

M & L for preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces including the new fixed wooden parts with grinder machine, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete.Rest all as specified and as directed by engr-in-charge.

Bed hard

Chair dinning cushioned

Chair dinning MAP (JCO/OR)

Chair dinning

Chair writing

Chair easy

Stool dressing CB/MAP

Table peg

Teapoy

Table centre

Table 900mmx600mm without drawer

Table 900mmx600mm with drawer

Table 900mmx900mm

Table dinning 1200mmx900mm

Table dinning 6 pers

Table dinning 8 pers

Table bed side

Hat stand with mirror

Bin soiled linen FD-244

Table dressing gents w/mirror

Table dressing ladies w/ mirror

Side board

Table writing

Book Case(W)

Sofa set 5 seater FD-281/373

Sofa set 4seater FD-281

Sofa set 5 seater FD-258

Table office offr (W)

Table 5'x2'-10"

Table office clk(w)

M & L for preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces including the new fixed wooden parts with grinding machine, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with applying lacqure polish till glossy finish is achieved complete .Rest all as specified and as directed by engr-in-charge.

Sofa Seat 5 seater Spl Type (TP)

Sofa set two seater spl (TP)

Table 18"x18" with glass top spl (TP)

Sofa set three seater Spl (TP)

Table Dining 8'x4' with glass top Spl (TP)

Chair Dining Spl (TP)

Table Centre 4'x2; Spl (TP)

Side Board (TP)

Peg Table Spl (TP)

Book Case wooden Spl (TP)

Side Rack Wooden (TP)

Table Executive officer (TP)

M&L to repair Almirah steel large/Almirah steel 1/2H 1/2shelf by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and as directed by engr-in -charge. (DRG NO. FD-1031/ 67(M))/FD/E6/MAP/18)

MS lock 6 lever with duplicate key.

Stainless steel handle 150mm long.

Complete internal locking device duly painted with one coat of red oxide primer.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.

M&L to repair Almirah medium/small steel by replacing the following unserviceable parts with approved ones.Rest all as per the drawings and as directed by engr-in-charge. (DRG NO. FD-1032/243/67M))

MS lock 6 lever with duplicate key.

Stainless steel handle 150mm long.

Complete internal locking device duly painted with one coat of red oxide primer.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.

M&L to repair locker steel by replecing the following parts with approved ones.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-257/1029)

MS cromium plated hasp and staple 75mm long.

MS cromium plated handle 100mm long.

Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer

M&L to repair book case steel by replacing the following parts with approved ones .Rest all as per the drawings and as directed by the Engineer-in-Charge. (DRG NO. FD-1028/TP)

SS handle100mm long.

Lock of suitable size with duplicate key to lock all four shutter with one key .

Pane glass 3 mm thick of suitable size.

M&L for preparation of old steel surface of chair verandah and welding loose joints, if any including de-rusting the surface and painting with two coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.8 thick plastic cane made out of virgin plastic, in existing pattern complete.Rest all as specified and directed by engr-in-charge. (Drg No. FD-359/259/256/19 )

S&F hard rubber shoe suitable for chair verandah of approved quality.

M&L to repair Teapoy verandah by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed. (DRG NO. FD-255 /208/ 35 )

M&L to repair table steel with /without drawer (900mmx600mmx760mm) by replacing the following parts with approved ones.as mentioned below and as per the drawings and as directed. (DRG NO. FD-1007/1008 )

Top made out of 18/19mm thick pre-laminated MDF board (exterior gde) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed.

S&F hard rubber toe of suitable size.

Removing old u/s top from table 900mmx900mm steel and S&F new top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white lamination on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed.(FD-1009)

Hard rubber toe for table 900mmx900mm of approved quality and suitable size.

M&L to repair table office clerks steel by replacing the following parts with approved ones.Rest all as per the drawings and as directed. (DRG NO. FD-1004/381/307/84(M)).

MS lock of suitable size with duplicate key.

Top made out of 18/19mm thick pre-laminated MDF board exterior gde ( Designation PLMDF 11) one side with approved shade and balancing white lamination on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed.

S&F hard rubber toe of suitable size.

M&L to repair table office officer steel by replacing the following parts with approved ones.Rest all as per drawings and as directed by engr-in-charge. (DRG NO. FD-1003/84(M)).

MS lock of suitable size with duplicate key.

S&F PVC handle of approved quality suitable for drawer.

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish. Rest all as per the drawings and as directed.

S&F hard rubber toe of suitable size.

M&L to repair Table bed side MAP by replacing the following parts with prelaminated MDF board(exterior gde)/plywood MR gde. Rest all as per drawings and as directed by engr-in-charge. (DRG NO. FD/E6/MAP/15, FD/E6/MAP/15(R))

Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with teakwood beading of suitable size.

Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side complete.

Back made out of plywood 6mm thick MR Gde.

All as per item no 15.01 but bottom complete.

Upper drawer complete.

Lower drawer complete.

CP handle of approved qulity and suitable size.

Telescopic channel of suitable size and approved quality.

M&L to repair bed hard MAP by replacing the following unserviceable parts with approved ones.Rest all as per drawing and as directed. (DRG NO. FD/E6/MAP/08,FD/E6/MAP/08®)

Plywood top 12mm(9 ply) thick MR Gde.

Nut and bolt with washer complete.

Pre-laminated MDF board (exterior gde) of Head rest complete.

Pre-laminated MDF board (exterior gde) of foot rest complete.

S & F PVC cap of suitable size.

M&L to repairs Chair executive revolving high back by replacing unserviceable parts as per drawings/ TP and as directed by engr-in- charge.

Only tapestry cloth of seat and back complete.

Only rexine cloth of seat and back complete.

Foam of seat/ back complete.

Only Plywood of seat /back.

Hydraulic of suitable size.

Base CP as reqd of suitable size and pattern

Base PVC of suitable size and pattern.

Wheel of suitable size and pattern.

Arms as requred by size and design(spl).

Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter.and Cost of rexine cloth shall not be less than 350/- per meter .

M&L repairs to Chair revolving med/ low back by replacing unserviceable parts as per drawings/TP.Rest all as directed by engr-in-charge.

Only tapestry cloth of seat and back complete.

Only rexine cloth of seat and back complete.

Foam of seat/ back complete.

Only Plywood of seat /back.

Hydraulic of suitable size.

Base PVC of suitable size pattern.

Wheel of suitable size and pattern.

Arms as requred by size and design.

Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter and Cost of rexine cloth shall not be less than 350/- per meter .

M&L repairs to Chair computer revolving by replacing unserviceable parts as per drawings/TP. Rest all as directed by engr-in-charge.

Only tapestry cloth of seat and back complete.

Foam of seat/ back complete.

Only Plywood of seat /back.

Hydraulic of suitable size.

Base PVC of suitable size and pattern.

Wheel of suitable size and pattern.

Arms as requred by size and design.

Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter.

M&L to repair Chair writing Map by replacing unserviceable parts as per drawing. Rest all as directed by engr-in-charge.(DRG NO. FD/E6/MAP/12).

Only tapestry cloth of seat and back complete.

Foam of seat/ back complete.

Only Plywood of seat /back.

Arms as requred by size and design.

Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of tapestry cloth shall not be less than 150/-per meter.

M&L to repair to Chair visitor by replacing unserviceable parts as per drawings/TP and as directed by engr-in-charge.

Only tapestry cloth of seat and back complete.

Only rexine cloth of seat and back complete.

Foam of seat/ back complete.

Only Plywood of seat /back

Arms as requred by size and design.

Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of rexine cloth shall not be less than 350/-per meter and .Cost of tapestry cloth shall not be less than 150/-per meter.

Removing unserviceable plywood from Charpoy folding and providing 8/9mm thick plywood MR Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paint of approved shade.Rest all as per drawing & as directed by engr-in-chage.(DRG NO. FD-388(R) )

Removing esisting unserviceable nylon newar from charpoy GI pipe,thightning the complete frame of charpoy and providing 12mm (9 ply) thick plywood of size 1980X900mm, ISI marked, BWR grade, Edges of plywood shall be provided 12mm half round dia teakwood beading duly fixed with penel pin and adsesive. Two numbers MS flate iron stiffeners of size (815-835)mm 40mmX5mm thick shall be to drilling and fixed with 40mm long ten Nos shunk type steel nut bolt & two coats of synthetic enamel paint (Black) over a coat of red oxide zinc chromate primer complete all as shown on drawing, as specified and directed by Eng-In-Charge (FD-220)

M&L to repairs charpoy GI pipe nylone newar by replacing the following unserviceable parts with approved ones.Rest all as per drawings and as directed by engr-in charge. (DRG NO. FD-220)

Plastic newar 50/55 mm width ( white colour),made out of virgin plastic of approved quality woven in V shape and sample as available in BSO office. Note:- (i) The weight of nylone newar shall be 1.5 kg per charpoy. (ii) The entire frame includuing legs of charpoy shall be titened before weaving.

S&F long rail made out of 32mm bore GI pipe medium grade of suitable size duly threaded up to 22mm on both side. Make : JINDAL/TATA/ASIAN

Fixing of short rail of suitable size made out from long rail as obtained from sr no 24.02 above duly threaded up to 22mm at both end.

Fixing of leg of suitable size made out from short rail as obtained from sr no 24.03 above duly threaded up to 22mm.

S&F 3 way medium gde GI elbow ISI marked suitable for 32mm bore GI pipe.

S&F GI check nut medium gde of suitable for 32mm bore GI pipe.

M&L to repairs bed plywood top by replacing the following unserviceable parts with first class teakwood.Restall as per drawings and as directed. (DRG NO. FD-246/247)

Long rail.

Stiffener.

Head rest.

Foot rest.

S&F 'L' shape MS flat iron 30mm x 5mm x125 mm long (painted with 1st grade black colour synthetic enamel paint over a coat of red oxide primer) between leg and rail to tight the whole frame complete.

3.5/4mm thick teak face plywood, including half round teakwood beading if broken, of both side of head rest complete.

3.5/4mm thick teak face plywood, including half round teakwood beading if broken, of both side of foot rest complete.

Plywood 12mm thick(9 ply) BWR Gde of suitable size.

M&L to repair Chair dining cushioned MAP by replacing the following unserviceable parts with first class teakwood. Rest all as as per drawings and as directed.(Drg No FD/MAP-II/04,FD/E6/MAP/10(R))

Front leg.

Rear leg.

Stiffener.

Only tapestry cloth of seat complete.

Vertical strip.

Only rexine cloth of seat complete.

Foam 75mm (40 D) of seat complete.

Only Plywood 12mm thick (9 ply) MR gde.

S&F PVC shoe 15mm dia of approved quality.

Note:- sample and shade of materials will be determined as per actual requirement at site.cost of rexine cloth shall not be less than 350/-per meter tapestry cloth shall not be less than 250/- per meter.

M&L to repair Chair dining by replacing the following unserviceable parts with first class teakwood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-279/270/228/203 FD/MAP-II/05 )

Front leg.

Rear leg.

Stiffener.

S&F PVC shoe 15mm dia of approved quality.

PVC seat4x10mmthickRIBS moulded alongwith seat in single piece of approved quality Make Amko/cello.

Back rest.

M&L to repair Chair writing by replacing the following unserviceable parts with first class teak wood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-280/250)

Front leg.

Rear leg.

Stiffener.

Back rest.

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Chair easy by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-229/201)

S&F PVC shoe 15mm dia of approved quality.

M&L to repair Peg table by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-384/277/236)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. Rest all as per the drawings and as directed.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 15mm dia of approved quality.

M&L for removing existing old/unserviceable canes from different types of chairs and recaning the same with 2mm half round dia made out of virgin plastic in godrej pattern as shown on relevent drawings complete.Rest all as specified and directed by engr-in-charge.

M&L to repair Teapoy by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-382/278/232/34)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. Rest all as per the drawings and as directed.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 20mm dia of approved quality.

M&L to repair Table centre by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-134/235/ 274/375)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. Rest all as per the drawings and as directed.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 20mm dia of approved quality.

M&L to repair Table 900mm x600mm without drawer/ With drawer by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-283/224/284/231/223/

Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. Rest all as per the drawings and as directed.

Leg made out of first class teakwood.

Front/rear rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

Drawer complete.

S&F PVC shoe 20mm dia of approved quality.

M&L to repair Table 900mm x900mm by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing & as directed.(DRG NO. FD-291)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. Rest all as per the drawings and as directed.

Leg made out of first class teakwood.

Side rail made out of first class teakwood.

Rail made out of first class teakwood.

S&F PVC shoe 25 mm dia of approved quality.

M&L to repair Table dinning (1200mm x900mm) by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD/MAP-II/03)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. Rest all as per the drawings and as directed.

Leg made out of first class teakwood.

Front/ rear rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 25mm dia of approved quality.

M&L to repair Table dinning 6 person by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-273/239/30(M)/FD/MAP-II/03)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. Rest all as per the drawings and as directed.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 25mm dia of approved quality.

M&L to repair Table dinning 8 person by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-273/239/30(M))

Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size. Rest all as per the drawings and as directed.

Leg made out of first class teakwood.

Front rail made out of first class teakwood.

Side rail made out of first class teakwood.

Stiffener made out of first class teakwood.

S&F PVC shoe 25mm dia of approved quality.

M&L to repair Table bed side by replacing the following parts with first class teakwood/ prelaminated particle board (exterior gde). Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-276/248/210)

Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) with approved shade duly provided teakwood beading infront of suitable size.

All as per item No. 39.01 above, but side complete..

All as per item No. 39.01 above, but bottom complete..

All as per item No. 39.01 above, but shelf 12mm thick complete..

Back ply 6mm thick MR Gde complete.

M&L to repair Table dressing gents with mirror by replacing the following unserviceable parts as per drawing & as directed by engr-in-charge. (DRG NO. FD-230/31(M))

Top made out of 18/19mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-11) duly provided teakwood beading infront of suitable size.

All as per item no 40.01 but bottom complete.

All as per item no 40.01 but side complete.

Back ply of base made out of plywood 12mm thick( 9 ply) MR gde complete.

Only Mirror 5mm thick of suitable size.

Mirror with Frame made out of first class teakwood and 6mm thick MR Gde plywood complete.

Drawer complete.

M&L to repair Table dressing ladies with mirror by replacing the following unserviceable parts as per drawing & as directed by Engr-in-charge. (DRG NO. FD-251/32(M))

Top made of 18/19mm thick MDF board

All as per item no 41.01 but bottom complete.

All as per item no 41.01 but side complete.

Back ply of base made out of plywood 12mm thick (9ply) MR gde complete.

Only Mirror 5mm thick of suitable size.

Plain glass 5 mm thick for sliding.

Aluminium channel complete of suitable size for sliding of glass.

Drawer complete.

Leg with frame made out of first class teakwood.

M&L to repair Side board by replacing the following unseviceble parts as per drawing and as directed by Engineer-in-Charge. (DRG NO. FD-241,371)

Top made out of 18/19mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-11) with approved shade duly provided first class teakwood beading infront of suitable size.

All as per item no 42.01 but bottom complete.

All as per item no 42.01 but side complete.

All as per item no 42.01 but partition complete.

All as per item no 42.01 but single shutter duly provided teakwood beading on edges complete.

All as per item no 42.01 but shelf 12mm thick complete.

Back ply 6mm thick MR gde.

Legs with frame made out from first class teak wood complete.

Drawer complete.

M&L to repair Bin soiled linen multipurpose by replacing the following unser viceable parts as per drawing and as directed by Engineer-in-Charge. (DRG NO. FD/E6/MAP/09)

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided PVC beading all around of approved quality.

All as per item no 43.01 above but bottom complete.

All as per item no 43.01 above but side complete.

All as per item no 43.01 above but partition complete.

All as per item no 43.01 above but single shutter(left) duly provided teakwood beading on edges complete.

Back ply 12mm thick (9 ply) MR gde.

Legs with frame made out of first class teakwood complete.

Drawer complete.

CP handle of approved qulity and suitable size.

M&L to repair Table writing by replacing the following unserviceable parts all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-275/249/33(M))

Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) of approved shade duly providing teakwood beading all around complete.

Leg made out of first class teakwood complete.

All as per item no 44.01 but front rail complete.

All as per item no 44.01 but side rail complete.

All as per item no 44.01 but side stiffener complete.

All as per item no 44.01 but center stiffener complete.

S&F teakwood frame( comprising one stiffener and two legs) of suitable size and shape as directed by engr in charge.

Drawer complete.

Lock of suitable size with duplicate key complete.

M&L to repair Book case wooden by replacing the following unserviceable parts all as per drawing & as directed Engr-in-charge. (DRG NO. FD- 237)

Top made out of 18/19 mm thick pre-laminated particle boardof approved shade duly provided with teakwood beading of suitable size.

All as per item No. 45.01 above, but bottom complete.

All as per item No. 45.02 above, but side complete..

All as per item No. 45.03 above, but shelf complete..

All as per item No. 46.04 above but shutter complete..

Leg with frame made out of first class teakwood complete.

Back ply 6mm thick MR Gde complete.

Lock of suitable size with duplicate key complete.

M&L to repair Sofa set 5/4 seater by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-281/373)

Side rail.

Batton seat/back.

Front rail of single seater.

Front rail of three seater.

Back rest rail top/side of single.

Back rest rail side of three seater.

Back rest rail top of three seater.

Removing old foam cushion with tapestry cloth and S&F new P.U.Foam cushion of size 530mmx560mmx100mm (40 density) duly covered with approved quality of tapestry cloth.Make of foam cushion:- sleepwell/kurlon. Note:- cost of tapestry cloth shall not be less than 250/- per meter.

Removing worn out tapestry cloth from old cushion and replacing the same with new tapestry cloth of approved quality. Note:- cost of tapestry cloth shall not be less than 250/- per meter.

M&L to repair Sofa set 5 seater by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-258)

Front/Side/Back rail of single seater.

Back Rest batton single seater

Back Rest batton three seater

Front /Back rail of three seater.

Plywood of seat single seater 8/9mm thick MR Gde.

Plywood of seat three seater 8/9mm thick MR Gde.

Removing old foam cushion with tapestry cloth from seat and S&F new P.U.Foam cushion of size 530mmx560mmx100mm (40 density) duly covered with approved quality of tapestry cloth.Make of foam cushion:- sleepwell/kurlon. Note:- cost of tapestry cloth shall not be less than 250/- per meter.

Removing of old foam cushion with tapestry cloth from back and S&F new P.U.Foam cushion 45mm thick ( 40 density) duly covered with approved quality of tapestry cloth including all necessary repair and replacement of required materials like jute cloth, wooden batton etc. Make of foam cushion:- sleepwell,kurlon. Note:- cost of tapestry cloth shall not be less than 250/- per meter.

Removing worn out tapestry cloth from old cushion of seat and replacing the same with new tapestry cloth of approved quality and zip shall be provided three sides of the cushion cover. Note:- cost of tapestry cloth shall not be less than 225/- per meter.

Removing worn out tapertry cloth from old cushion of back and replacing the same with new tapestry cloth of approved quality including necessary repairs. Note:- cost of tapestry cloth shall not be less than 250/- per meter

M&L to repair fully uphostry sofa set 5 seater cladded with tapestry cloth by replacing tapesty cloth of approved quality including replacement of unserviceable material like cotton,coir,foam,GI spring, wooden members etc. and polishing the exposed surface of the same with high gloss finish of french polish. Rest all as per drawing/ TP and as directed by engr in charge. Note:- Sample and shade of material will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 350/- per meter.

All as per item No. 48 above but tapestry cloth only without damaging the other parts of sofa set.Rest all as per drawing/ TP and as directed by engr in charge. Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth should not be less than 350/- per meter.

M&L to repair fully uphostry sofa set 5seater cladded with rexine cloth by replacing rexine cloth of approved quality including replacement of unserviceable material like cotton,coir,foam,GI spring, wooden members etc.and polishing the exposed surface of the same with high gloss finish of french polish. Rest all as per drawing/TP and as directed by engr in charge. Note:- sample and shade of materials will be determined as per actual requirement at site. cost of rexene cloth shall not be less than 450/- per meter.

All as per item No. 50 above but rexine cloth only without damaging the other parts of sofa set.Rest all as per drawing/ TP and as directed by engr in charge. Note:- sample and shade of materials will be determined as per actual requirement at site.cost of rexene cloth shall not be less than 450/- per meter.

M&L to repair Table computer by replcing the following unseviceable parts all as per the drawings and as directed by engr-in-charge. (DRG NO.FD/E6/MAP/03,TP)

Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with PVC beading of as requaired complete.

Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side.

All as per item No 52.01 but Key board drawer complete.

All as per item No 52.01 but mouse drawer complete.

All as per item No 52.01 but middle shelf complete.

All as per item No 52.01 but bottom shelf complete.

Telescopic channel of suitable size and approved quality.

Note:- Sample and shade of materials will be determined as per actual requirement at site.

Dry cleaning of chair computer,chair revolving med/high back and chair visitor, chair writing MAP by soda, sampoo, castic, urea, chemical etc to clear the dust.

Dry cleaning of full upholstery sofa set 5 seater by soda,sampoo,castic,urea, chemical etc to clear the dust.

M&L to repair hat stand with mirror by replacing the following parts with approved ones.Rest all as per drawing and as directed by engr- in-charge. (DRG NO. FD-233)

First class TW beading at all around of frame

Mirror 5mm thick

Aluminium pegs, 100mm long

Aluminium nail hook, 50mm longh

Spot welding on various items of steel furniture FD/TP

Repair to various type of wooden chairs and tightening the whole frame of chair FD/TP

Removing of old unserviceable top of Table executive size 76"x36"x30" and replacing with new top made out of 18mm thick exterior grade, ISI marked particle board duly post formed (PFT) with 0.6mm thick teak faced laminate extened upto minimum 50mm from the bottom edge and having other side white and with 2mm thick PVC edging on two short side of the top duly fixed with strong adhesive and fixed in postion all as specified and as directed (.Make Ecoboard/Action-Tesa/Greenply)

All as per item No 58 above but removing of old unserviceable top of Table executive size1800x1200x750mm and replacing with new top .

All as per item No 58 above but removing of old unserviceable top of Table executive size 1500x750x750mm and replacing with new top

All as per item No 58 above but removing of old unserviceable top of Table Office officer 1680x870x760mm and replacing with new top

All as per item No 58 above but removing of old unserviceable top of table centre 4'x2' wooden and replacing with new top.

All as per item No 58 above but removing of old top of table officer 1800x900x760mm and replacing with new top

Removing of unserviceable glass top of table centre 4'x2' and replacing with new new glass top 10mm thick of same pattern duly preparation and polishing of edges. Rest all as required at site and directed by Engr in Charge(TP)

All as above as per item No 64 but 10mm thick glass top of table glass 1500mmx900mm

All as above as per item No 64 but 10mm thick glass top of table glass 8'x4'mm

All as above as per item No 64 but 10mm thich glass top of table 450x450mm

All as above as per item No 64 but 10mm thick glass top of table peg 450mmx450mm

NAVEEN TRADERS

R C Sharma and Co

Shri Gajanand Enterprises

SMS Enterprises

Techno India Enterprises