GE(S) BTD TOKEN NO 90 OF 2023-24 PROVISION OF CERTAIN SPECIAL REPAIR AND LBW AND MINOR WORKS UNDER AGE BR II AND AGE EM IV UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Non skid floor tiles, colored, of size 400x400x7mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 10 mm thick bedding layer in cm 1:6 complete all as specified and directed.

Description all as per Ser item No 2 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab minimum size 450 mm x 300 mm, 20 to 25 mm thick in riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white cement paste pigmented to the match the shade of tiles laid over and including M&L for 15 mm thick rendering in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and directed.

M&L for rendering 15mm thick cement palster in CM 1:6 on brick or concrete surfaces other than fair faces finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick work or concrete surfaces etc including raking out joints or hacking for key, scrubbing down with water etc. complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls, applying 3mm thick wall care putty on wall and two coats of distemper oil emulsion over one coat of priming plastered surfaces with alkali resistant priming paint complete all as specified and as directed.

Preparation of old (Previously treated) plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered or painted surfaces of walls and applying one coat of Oil Bound distemper white or tinted on walls complete all as specified and directed.

Preparation of old plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smake soot, moulds, mass and efflorescent salts and trading oil and greasy spouts and applying one coat of cement base paint on walls including cornices etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

Pressed steel door frame of size 120x60mm, double rebated for doors made out of 1.25mm thick mild steel sheet including necessary fixing lugs, hinges lock strike plate etc, complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts and in coping , etc., complete all as specified and directed.

S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I) complete all as specified and directed.

S & F in 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane, including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size mprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately), supplying & fixing in frame at site as per specification & drawing

Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed

S&F aluminium anodised handles, 150 mm long, cast type, (ISI marked) complete all as specified and as directed .

S&F 300mm long aluminium sliding doors bolts, plate type, stove enameled black bolts and nuts, four on bolt plate and two on staple all as specified.

Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

M&L for Preparation of old or previously untreated surfaces of steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as direcetd.

Supply and fixing anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F anodized aluminium window/ventilators shutters/Partition ( thickness of powder coating not less than 50 micron) fixed type w/o sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc in repair complete all as specified and directed.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed.

M&L for 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches , pillars etc. complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:4) using old size bricks complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

Supply only intergral water proofing compound complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on old plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and complete all as specified and directed.

M & L for preparation of old plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and all as specified and directred.

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for Rendering 15mm thick cement palster in CM 1:3 on brick or concrete surfaces as in ceiling in two layer other than fair faces finished even and smooth without using extra cement all as specified and as directied.

M&L for preparing newly plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed. complete all as specified and as direcetd.

Demolition Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Anodised aluminium snap grid (Size 605mm x 605mm)frame work for false ceiling all as specified complete all as specified and as direcetd.

M&L 12mm thick perforted particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid, fixed in existing ceiling flat or sloping complete all as specified and directed

Dismantling of AC sheets (corrugated, semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I..1161- 1979 grade St.-240 Fe 410-W (Gde-E- 250) quality-A complete all as specified and as direcetd.

M&L for Rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410-S complete all as specified and directed.

M&L painting with synthetic enamel paint two coats including redoxide and preparing the new steel surfaces of any description over 10cm in width or girth complete all as specified and as direcetd.

M&L for providing RCC M 25, design mix, using stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and as direcetd.

M&L for Formwork to soffits of suspended slabs, such as roof slabs floor slab, landings and similar work not exceeding 200mm thick horizontal or sloping for rough finished concrete surface complete all as specified and as direcetd.

M&L TMT steel bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as direcetd.

Taking down steel tubing and connectors of 15mm bore complete all as specified and as direcetd.

All as items No 58 above but 20mm bore complete all as specified and as direcetd.

S&F GI tubing 15mm bore medium grade with all fittings, fixed to wall, ceiling to laid under floor, complete all as specified and as direcetd.

S&F GI tubing 20mm bore medium grade with all fittings, fixed to wall, ceiling to laid under floor, complete all as specified and as direcetd.

Cutting chases, pinning in. making,good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as direcetd.

S&F in repair Rotational molded polythene water storage tank ISI marked double layer (cylindrical) vertical with closed top, 250 ltrs capacity, hoisted and fixed in position, complete all as specified and directied.

S&F in 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210gms) etc complete all as specified and as direcetd.

S&F in repair 20mm gun metal gate valves with iron whel head complete all as specified and as direcetd.

S&F in repair 15mm gun metal gate valves with iron whel head complete all as specified and as direcetd.

S&F in repair Bib tap 15mm dia cast copper alloy with crutch or butterfly handle, screwed down, screwed for brass ferrule complete all as specified and as direcetd.

Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and as directed .

S&F in repair 15mm bore chromium plated quarter turn pillar cock screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and as direcetd.

S&F in repairs 15mm bore chromium plated fancy type angle valve of cast copper alloy screwed down high pressure, with crutch nutterfly handlw screwed both ends for iron pipe or unions and fixed complete all as specified and as direcetd.

S&F PVC in repair connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed.

Supply and fix Tubular towel rail, 20mm dia, D type, 60cm long between flanges (Brass chromium plated) complete all as specified and as direcetd.

S&F chromium in repair plated soap tray any type and dixed to plygs on wall wit chromium plated brass screws complete all as specified and directed.

S&F in repair 125mm dia grating with/without waste hole of PTMT incl circular cutting on tiles etc. complete all as specified and as direcetd.

S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 Sqm on plan and not exc 1.5 m depth & getting cut in soft/loose soil complete all as specified and as directed .

M & L for 100mm dia (internal) SGSW pipes laid in trenches & jointed complete all as specified and as directed .

M & L for PCC 1:3:6 type C-2 conc bed using 40mm graded stone agg to drain pipe including packing under & haunching against the sides of pipe 100 mm dia ( internal) after these are laid in trenches complete all as specified and as direcetd.

M&L PCC 1:4:8 type D-2 using 40mm graded crushed stone agg for foundations, filling & mass concrete etc complete all as specified and as directed .

M&L PCC 1:2:4 type B-1 using graded stone aggregate at manhole bedding & coping complete all as specified and as directed .

S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed.

S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

Surface excavation n.exc 30cm depth & average 15 cm deep & getting cut in soft/loose soil complete all as specified and as direcetd.

M&L for Hardcore of stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as direcetd.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded agg) as in Sub-base to floor finishes complete all as specified and as direcetd.

M&L 25mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and as direcetd.

S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as direcetd.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as direcetd.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as direcetd.

Demolition of cement concrete of any description in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as direcetd.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 M means radius built in CM (1:6) using old size bricks complete all as specified and as directed.

M&L for providing 75mm thick PCC (1:4:8) type D-2 (using 40mm graded agg) as in sub base complete all as specified and as direcetd.

Material and labour Glazed Ceramic tiles of 450x 300x 7 mm thick as in vertical surfaces such as skirting/ dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles incl rendering 10 mm thick in cement mortar 1:4 on vertical surfaces as screed bed for dado/skirtings etc complete all as specified and as direcetd.

Material and labour for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement incl Screed bed or bedding layer of cement mortor 20 mm thick in cement mortar 1:6 for laying of floor finishes to match complete all as specified and as direcetd.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') conforming to Fe 290 Gde E-165 complete all as specified and as direcetd.

Hard drawn steel wire (wt n.exc 4 Kg per sqm) fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt complete all as specified and as direcetd.

S&F 1.00 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as direcetd.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and as direcetd.

M&L for PCC Type B2 1:2:4 (40 mm graded aggregate)as in surface channel and drains complete all as specified and as direcetd.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built CM (1:4) in complete all as specified and as directed.

M&L for flush pointing to brick masonary in CM 1:4 complete all as specified and as direcetd.

Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and as direcetd.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, over drain and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as direcetd.

Demolition of Road metal as in ground floor exc 15 cm thickness (below or above ground level) complete all as specified and as direcetd.

Removing of demolished materials etc exc 50 but n.exc 250 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as direcetd.

Reinforced concrete pipes, class NP3 of 200mm dia bore, laid in trenches and jointed complete with collars complete all as specified and as direcetd.

M&L plain cement Concrete bed 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to including packing under, and completely surrounding pipes for drain pipes of bore 200mm with concrete after they are laid and tested complete all as specified and as direcetd.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as direcetd.

Excavation over areas not exceeding 1.5 mtr deep in soft/loose soil and getting out of soil complete all as specified and as direcetd.

Exacavation of areas exceeding 1.5 mtr and not exceeding 3.0 mtr deep in soft/loose soil and getting out of soil complete all as specified and as direcetd.

M & L for hard core of broken bricks of gauge not exceeding 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick, watered and rammed complete all as specified and as direcetd.

M&L 50mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as floors, sub-floors etc and finishing surfaces of concrete topping as even & fair or even & rough to receive the topping layer complete all as specified and as direcetd.

Providing precast cement concrete1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) set in CM 1:6. including all necessary form work complete all as specified and as direcetd.

M&L form work to sides of concrete flats and similar work exc 10 cm but not exceeding 20 cm wide for rough finish surface complete all as specified and as direcetd.

S & F mild steel TMT bars 8-10 mm dia cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as direcetd.

All as per srl item No. 119 above but 8mm dia bars complete all as specified and as direcetd.

S & F MS rungs of 20mm dia bar etc complete all as specified and as direcetd.

Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in benching including necessary form work complete all as specified and as direcetd.

Mild steel work as in handles of man hole cover slabs, rungs of man holes, straps and similar articles confirming to FE-290 Gde E-165 complete all as specified and as direcetd.

M & L for rendering 15 mm thick on fair faces of brick works masonry or concrete surfaces in CM 1:3 mixed with WPC finished the surface even & smooth without using extra cement complete all as specified and as direcetd.

Rendering 15mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement complete all as specified and as direcetd.

Rendering 10mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement complete all as specified and as direcetd.

Supply only liquid water proofing compound complete all as specified and as direcetd.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms , moulds, mitred/stopped ends etc. complete all as specified and as direcetd.

Reinforced concrete pipes, class NP3 of 200mm dia bore, laid in trenches and jointed complete with collars complete all as specified and as direcetd.

M&L plain cement Concrete bed 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to including packing under, and completely surrounding pipes for drain pipes of bore 200mm with concrete after they are laid and tested complete all as specified and as direcetd.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick soft/loose soil complete all as specified and as direcetd.

INTERNAL ELECTRIFICATION

Taking down carefully to existing serviceable copper point wiring (light,fan, socket or power) complete including fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removing materials to E/M store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M & L for Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, GI terminal boxes, modular frame & cover plate (suitable for modular switch/sockets) comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

All as per Srl No. 135(here-in-befor) but for each additional light point on the same switch circuit complete all as specified and directed.

One Socket outlet three pin, 6 Amp, on the same board, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, complete all as specified and directed.

One Socket outlet three pin, 6 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

One socket outlet three pin, 5/15 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

One Bell/Buzzer point controlled by one push button with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

Note for serial item No 134 to 140: 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed.

S&F Switch modular type single pole, one way, 6 Amp, one module complete all as specified and directed.

S&F Switch modular type single pole one way, 16 Amp, one module complete all as specified and directed.

S&F Socket outlet modular type, multipurpose, 3 pin, single pole one way, 6 Amp, two module, shutter type complete all as specified and directed.

S&F Socket outlet modular type, multipurpose, 2/3 pin, single pole one way, 6 Amp, two module, shutter type complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 pin single pole one way 6/16 Amp, two module, shutter type complete all as specified and directed.

S&F Fan regulator, modular type, 5 step, high speed, two module complete all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 25watt, 1.2 m 3000/6500K, efficacy not less than 90 lumen/watt, extruded Aluminium/ polycarbonate, PC diffusor and integrated inbuilt driver complete complete including making connection complete all as specified and directed.

S&F MCB 6-32 Amp 240V SP 10 KA ‘B’ series complete all as specified and directed.

S&F RCBO for EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION 415 V 40-63A AC type 10kA Four pole 30mA ISI marked complete all as specified and directed.

S & F in replacement sub main two single core PVC copper conductor unsheathed wire multi standed 4.0sqmm including cutting chasing and grouting PVC pipe including Tee, Elbow, bend etc and including 4.0sqmm sopper conductor single core wire connected by common earth including 20mm dia concealed PVC conduit, medium grade, ISI marked complete all as specified and directed. (Note:- Two lengths of 4.0sqmm cable and one lenth of 4.0sqmm earth cable along with 20mm dia concealed PVC conduit, medium grade, ISI marked will be measured as one running length)

Supplying and fixing wall mounted LED batten fitting complete with one LED tubelight 1x10 watt, 6500K, 2 ft complete with decorative LED lighting fixture with extruded polycarbonate enviroment frindly, energy efficient complete with all light fittings connection complete all as specified and directed.

Supplying and fixing call bell ding dong type AC 230V complete all as specified and directed.

Dismentaling and taking down carefully MCB distribution boxes including MCBs/isolators of any type and model complete all as specified and directed.

S&F in replacement sheet metal encloser double door 6 way TPN 415V ISI marked with provision of FP RCBO as incomer and SP MCB's as outgoing complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed

Supplying and fixing angle lamp holder polycarbonate type with back plate complete all as specified and directed.

Supplying and fixing LED 7W lamp base B-22 complete all as specified and directed.

Dismentaling of unserviceable earthing complete all as specified and directed.

S&F rigid non-metallic PVC conduit external dia 32mm in size exclusive of boxes(junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.complete all as specified and directed.

taking down carefully existing ceiling fans 1200mm/1400mm sweep from qtrs, deposite safely to E&M yard store complete all as specified and directed.

Dismentaling and taking down carefully unsv UG cable complete all as specified and directed.

Supplying, laying, jointing & testing, in replacement underground XLPE insulated screen PVC bedded, GI steel strip or wire armoured heavy duty LT electric power cable cross sectional area 25 sqmm 4 core with aluminium conductor, 1100Volts grade, complete all as specified and directed

Removing excavated surplus soil to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M&L for Sand cushioning in trenches for cables including watering and consolidation complete all as specified and directed

Supply, laying & testing(In Repair 'light grade' galvanised, 40mm bore with all fitting, unions, elbows etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed

Supply and laying unreinforced pre cast concrete cable cover class LV type 1 flat size 250x150x50mm for cable protection complete all as specified and directed

Supply and fixing cable jointing kit 11KV grade cable for outdoor termination heat shrinkable type straight throught joint complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 16 sqmm to 35 sqmm complete all as specified and directed

S&F in replacement single pole and neutral enclosure 240V with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and directed

S&F in repair LED panel light fitting, recessed mounted, square shaped of size (595x595x65)mm, 36(±10%)watts efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and directed.

Supply and fixing heavy duty plastic body ventilation fan of 250mm sweep, 240 V complete with louvers and shutter and mounted in suitable opening arrangement in wall/window and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including fixing of exhaust fan including grouting of bolts, nuts etc. complete all as specified and as directed .

S & F ceiling fan 1200mm sweep, 5 star BLDC, minimum speed 350 RPM, min air delivery 210 CMM with service value 6.00 BEE corrosion resistant high performance with powder-coated set of 3 bldes, 100% copper motor, with set of 2 canopy, 1 down rod, 1 shackle assembly, 1 fan regulator capacitve type and accessories complete all as specified and directed.

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

S&F LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 & IK 08 protection including fixing with suitable bolt and nuts complete with making connection complete all as specified and directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

BALAJI CONSTRUCTIONS

Ajay Enterprises

M/s Kamal Constructions

M/S KARTIK BUILDERS

AABIA CONSTRUCTION

SUBHASH ARORA CONSTRUCTION CO

M K Enterprises