PROVISION OF COVERED SHED FOR GROUND EQPT AT HANGER NO.9 AT

Amount

Demolition of cement concrete of any description & in any position etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B 2 (40 mm graded crushed stone aggregate) in foundations, filing mass mass concrete all as specified and as directed. .

S & F Steel work in tubular trusses (framed and curved) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 all as specified and as directed.

S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate conforming ot Fe- 410-W-(Gde-E-250) quality A etc complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (curved) 0.50mm of an approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for painting steel & iron surfaces with two coats of synthetic enamel paint over a priming coat of red oxide including preparation of surface all as specified and directed.

M&L for Pre-cast cement concrete 1:3:6 Type C-1 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting/laid in cement mortar (1:4) complete all as specified and directed.

M&L Rendering 15mm thick cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 10 mm thick on fair faces in cement mortar 1:6 of brick work or concrete surfaces to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified.

M & L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floors and pavings etc, finishing without extra cement, complete all as directed by Engr-in-charge.

S & F 1 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as directed by Engr-in-charge.

S& F 150mm bore UPVC pipes (Sch - 40) including fittings , jointing, fixed to walls , complete all as specified and directed.

Removing building materials etc.to a distance 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified.

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cluding cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all omplete as per architectural drawings and the directions of Engineer-in-Chief complete all as specified and directed.

S&F 5.5 mm thick tinted sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each panelfixed to alluminium frame works with neccessary rubbber bedding complete all as specified and directed.

S&F for 12mm thick both side choice laminated prelaminated particle board for insulation purpose, fixed to aluminium framework, complete all as directed by Engr-in-Charge.

S&F Aluminium extruded section body, Door closer hydraulically regulated, deisignation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F 4 levers aluminium mortice lock, brass vertical type, size 100 mm complete all as directed by Engr-in-Charge.

M & L for sub main wiring complete with two runs of 2 x 1.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1x1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

M & L for sub main wiring complete with two runs of 2 x 2.5 sqmm FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in recessed / surface of wall, roofs etc with one run of PVC insulated copper conductor 1x 2.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed

S & F modular socket 06 Amps 2/3 pin, 2 module complete all as specified & directed.

Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed

S & F modular socket 06/16 Amps 2/3 pin 2 module complete all as specified & directed.

S&F modular White cover plate with frame 3 module complete all as specified & directed

S&F modular metal flush box 3 module complete all as specified and directed.

S&F modular White cover plate with frame 6 module complete all as specified & directed

S&F modular metal flush box 6 module complete all as specified and directed.

S&F modular White cover plate with frame 8 module complete all as specified & directed

S&F modular metal flush box 8 module complete all as specified and directed.

Supply & fixing bell push flush type 5 Amps in replacement of old u/s complete all as specified & directed.

S & F in replacement Door bell AC, 230 volts, single pole in replacement of old u/s bell/ buzzer complete all as specified and directed.

S & F electronic fan regulator modular type, 2 module, 120W including complete all as specified and directed.

Supply & fixing of ceiling rose surface three terminals in replacement of old u/s complete all as specified & directed.

S&F Supply and fixing LED lights fitting 1x 18W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Bajaj /CG/Philips/Havells

Supply and fixing ceiling fans complete incl anti suicide rods with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep Min air delivery 210 CFM with service value 6.00 BEE. Five starrated with brushless direct current motor (BLDC).

S & F in repair MCCB DB Vertical TPN 4 Way 'A' Frame,Including MCCB TPN 63 Amps Beaking capacity 16 Ka -01 nos, Double Door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match the existing in replacement of old U/s complete all as specified and directed. Make -Havells/Legrand/LET

S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

Supply and fixing in repair of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.

Supply & fixing GI earth wire 4.00 mm dia for interconnecting of earth electrodes all as specified.

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable including taking out old bricks from trenches and separating serviceable bricks and set aside for reuse complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms each in depth complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified.

M&L for brick protection cover on cable with sub class 'B' brick laid dry flat adjacent to each other complete all as specified and directed.

Supply and fixing of GI tubing, light grade, 32 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete. Make - TATA / ZINDAL / Bansal .

M&L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations for electric poles, filling and mass concrete complete all as specified and directed.

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised, steel strip or wire armoured, electric power cable, (heavy duty) 1100 volts grade, with stranded aluminium conductor of size 4 core x 16 Sqmm (From Existing Hanger No 9 Panel to Proposed covered shed)

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe upto 150 mm dia suitable for 0.4 mpa working pressure.

PRAGATHI BUILDERS

Ajinkya Constructions

Siddivinayaka Constructions

G K CONSTRUCTIONS